Traulsen Keys for Lock Cylinders

OEM Part Details

• Manufacturer: Traulsen
• OEM Number: 358-28924-42
• OEM Status: VERIFIED
• MPN: 358-28924-42
• SKU: PD-120-460
• Part Type: Hinge

Product Overview

Traulsen OEM hinge 358-28924-42 is a door-hardware component used to support controlled door movement on commercial foodservice equipment. A properly matched hinge helps the door swing, sit, and close in its intended position while carrying the load placed on the door assembly during normal use. Because door hardware affects alignment, closure, and gasket contact, a worn or damaged hinge can contribute to difficult door operation and make routine cabinet service more involved. This Traulsen hinge gives service teams a manufacturer-identified replacement option when the original component requires attention. Matching the OEM number and comparing the original hinge before purchase helps avoid ordering a part with the wrong mounting arrangement, orientation, or hardware configuration. Inspecting the surrounding door hardware at the same time can help identify wear that may affect the replacement hinge or the door’s closing action. For busy foodservice operations, correct door-hardware selection supports dependable daily access and helps maintain a properly aligned door assembly.

Product Function

The hinge provides a mechanical pivot point between the door and its supporting structure. It carries the door through repeated opening and closing cycles while helping keep the door positioned correctly relative to the latch, frame, and gasket. When hinge hardware becomes loose, worn, bent, or damaged, the door may no longer sit squarely in the opening. This can affect closure effort and gasket contact. Traulsen OEM part 358-28924-42 is intended to replace the identified hinge component so the door assembly can be restored with the correct manufacturer part number. The hinge should be evaluated as part of the complete door-hardware arrangement rather than as an isolated component.

Why Choose a Genuine OEM Replacement?

Using the Traulsen OEM part number provides a clear identification point when replacing this hinge. OEM number 358-28924-42 helps service personnel match the replacement to the original manufacturer-identified component and reduce uncertainty during ordering. Comparing the original hinge, its orientation, and its mounting points remains important, especially where door hardware has been serviced previously. Choosing the correctly identified OEM hinge supports a more confident repair decision and helps prevent delays caused by an incorrect mechanical component.

How This Part Works

A hinge works by allowing the door to rotate around a fixed pivot while maintaining a stable relationship between the door and its supporting structure. Its position affects how the door travels through its swing, where it rests when closed, and how the latch and gasket meet their corresponding surfaces. In commercial service, repeated use can place ongoing load on hinge hardware, mounting points, and related door components. If the hinge develops wear or loses secure mounting, the door can shift from its intended alignment. That shift may place added strain on the latch, door closer, gasket, or adjoining hinge hardware. Replacing the correct hinge addresses the pivot component, while inspection of the full door assembly helps determine whether other related parts also need attention.

Technician Service Tip

Before replacing a hinge, compare the original component with OEM part 358-28924-42 for orientation, mounting points, and overall door-hardware arrangement. Inspect the door alignment, hinge fasteners, latch engagement, and gasket contact for related wear or damage.

Common Failure Symptoms

• A door that sags or sits lower than its normal closed position may indicate hinge wear or loose mounting hardware.
• Uneven gaps around the door can indicate that the hinge and related mounting points should be inspected.
• A door that requires extra force to open or close may indicate a worn, damaged, or misaligned hinge arrangement.
• Difficulty engaging the door latch can indicate that door alignment or hinge hardware needs evaluation.
• Visible movement at a hinge mounting point may indicate loose or worn hardware.
• A door that does not rest squarely against its closing surface may indicate hinge-related alignment concerns.
• Rubbing, binding, or inconsistent door travel can indicate that the hinge and adjoining door hardware should be inspected.
• Reduced gasket contact around part of the door perimeter may indicate that the door alignment requires evaluation.
• A bent, cracked, or visibly worn hinge may indicate that replacement is needed.
• Repeated need to reposition the door may indicate wear in the hinge, mounting hardware, or related door components.

Commercial Applications

This Traulsen hinge is relevant to commercial equipment service involving door assemblies and related mechanical hardware. Foodservice maintenance teams, restaurant kitchens, institutional kitchens, and service providers may encounter door-hardware wear where frequent access places ongoing demand on hinges, latches, closers, and gaskets. The part should be selected by its verified Traulsen OEM number, 358-28924-42, and by direct comparison with the original component. No equipment-specific fitment is stated here, so purchasers should confirm the equipment identification label and compare the existing hinge configuration before ordering. Correct identification is especially important when a door assembly has prior service history or non-original hardware.

Before You Order

• Match Traulsen OEM number 358-28924-42 to the original component or approved equipment documentation.
• Compare the original hinge with the product image and part description.
• Confirm the hinge orientation and door-side position before ordering.
• Compare the mounting-point arrangement on the original component.
• Inspect the existing hinge for visible wear, bending, cracks, or damaged mounting areas.
• Check the equipment identification label, including the serial number, for service reference.
• Review the door alignment and latch engagement for related issues that may remain after hinge replacement.
• Inspect the door gasket contact area, since a shifted door can affect sealing contact.
• Confirm whether hinge fasteners, pins, or other related door hardware also require attention.

Related Components

• Door gasket: Inspect gasket contact and compression because door alignment can affect how evenly the gasket meets its closing surface.
• Hinge screws or pins: Check related hinge hardware for looseness, wear, or damage that could affect the replacement hinge’s secure mounting.
• Door latch: Evaluate latch engagement because a shifted door may not align consistently with the latch.
• Door closer: Inspect the closer where present, since door movement and closing action can be affected by multiple door-hardware components.
• Door mounting area: Examine the supporting door and frame mounting points for wear or damage that may contribute to misalignment.

Frequently Asked Questions

What is Traulsen OEM part 358-28924-42?

Traulsen OEM part 358-28924-42 is identified as a hinge used in a commercial equipment door-hardware assembly.

How do I confirm this Traulsen hinge is the correct part?

Match OEM number 358-28924-42 to the original component or approved equipment documentation, then compare the original hinge orientation and mounting-point arrangement.

Can a worn hinge affect door closure?

Yes. Hinge wear, damage, or loose mounting can affect door alignment, latch engagement, and gasket contact.

What should be inspected with a replacement hinge?

Inspect the door gasket, hinge screws or pins, door latch, door closer where present, and the door mounting area for related wear or damage.

Why is hinge orientation important when ordering?

Door hinges can differ by orientation and mounting arrangement. Comparing the original component helps prevent an incorrect mechanical match.

Does this listing confirm equipment-specific fitment?

No equipment-specific fitment is stated. Confirm the equipment identification label and compare the original component before ordering.