Glastender 01000550 Pressure Switch

OEM Part Details

• Manufacturer: Glastender
• OEM Number: 01000550
• MPN: 01000550
• SKU: 01000550
• Part Type: Pressure Switch

Product Overview

Glastender 01000550 is an OEM pressure switch identified for glasswasher liquid-level and low-chemical sensing. This control-related component uses an air-pressure signal to help communicate a system condition through the equipment control and safety circuit. Its role is important because the connected controls depend on the correct switch response when monitoring the applicable liquid-level or chemical condition. For commercial equipment service, an incorrect pressure switch can create unnecessary diagnostic work and may not match the original component’s terminal arrangement or sensing connection. Matching the Glastender manufacturer part number is the most dependable starting point when replacing this part. Compare the removed switch carefully, including its terminals, mounting arrangement, sensing tube or port connection, and overall configuration. This Glastender pressure switch is intended for qualified service diagnosis rather than replacement by appearance alone. When the original component has been identified as the source of a control-circuit concern, OEM number 01000550 provides a clear reference for ordering. Confirm the equipment data plate, model, serial number, and original part details before purchase to reduce the chance of a wrong-part order.

Product Function

The Glastender 01000550 pressure switch monitors an air-pressure condition associated with glasswasher liquid-level and low-chemical sensing. When the sensed condition reaches the switch’s designed operating point, the switch changes its electrical contact state for the connected control and safety circuit. That signal can be used by the equipment controls to recognize the applicable operating condition. Because this is an electrical control component, the original part should be compared before ordering. Terminal layout, sensing connection, mounting points, and wiring condition are all relevant inspection areas. Do not select a pressure switch solely because it looks similar; the manufacturer part number and equipment information should be verified first.

Why Choose a Genuine OEM Replacement?

A genuine Glastender OEM part helps keep replacement identification centered on the manufacturer part number rather than visual similarity. Pressure switches can differ in terminal layout, sensing connection, mounting details, and control-circuit role even when their housings appear alike. Ordering Glastender OEM number 01000550 provides a direct reference to compare with the removed component and the equipment documentation. Verify the OEM number, equipment model, serial number, and original switch configuration before ordering.

How This Part Works

This pressure switch is associated with an air-pressure sensing connection and an electrical control circuit. A sensing tube or port communicates the applicable pressure condition to the switch. The switch responds by changing the state of its electrical contacts, allowing the connected equipment controls to recognize that condition. The exact operating setting, wiring arrangement, and equipment sequence should be confirmed from the specific unit documentation and the original component. A pressure switch concern may also involve damaged sensing tubing, an obstructed sensing path, loose terminals, wiring damage, or another connected control. For that reason, qualified service diagnosis should confirm the source of the concern before replacement. Inspect the switch body, sensing connection, terminals, mounting points, and related control wiring while comparing the replacement to the removed part.

Technician Service Tip

Before replacing the switch, compare the removed Glastender component with OEM number 01000550. Inspect the sensing tube or port connection for damage or blockage, and verify terminal positions, wiring condition, and mounting details against the original part.

Common Failure Symptoms

• A liquid-level or low-chemical condition may not be recognized as expected after qualified diagnosis.
• A control-circuit interruption may indicate that the pressure switch and its connected wiring should be inspected.
• A switch that remains open or closed when the applicable condition changes may require evaluation.
• Damaged, loose, disconnected, or obstructed sensing tubing may affect pressure-switch operation.
• Corroded, loose, or damaged terminals may contribute to an intermittent control-circuit concern.
• Visible cracks, impact damage, or moisture-related damage on the switch housing may warrant inspection.
• A control response concern may indicate that the switch, sensing connection, and related controls should be evaluated together.
• Replacement may be considered when qualified service diagnosis identifies the original pressure switch as defective.

Commercial Applications

Glastender OEM number 01000550 is identified for glasswasher liquid-level and low-chemical sensing. It is relevant to commercial equipment service in restaurant kitchens, bar service areas, institutional foodservice operations, and maintenance environments where Glastender glasswashing equipment is maintained. Because pressure-switch configuration can vary by equipment arrangement, this part should be ordered only after the equipment data plate and original component have been confirmed. Service personnel should also inspect the sensing connection, terminals, wiring, and related control components when diagnosing the source of a liquid-level or chemical-sensing concern.

Before You Order

• Match Glastender OEM number 01000550 to the original component and available equipment documentation.
• Confirm the Glastender equipment model and serial number from the equipment data plate.
• Compare the removed pressure switch with the product image before ordering.
• Verify the terminal count, terminal positions, and connector or wire connection arrangement.
• Inspect the sensing tube, sensing port, or air-pressure connection for matching configuration.
• Compare mounting points, bracket arrangement, and switch orientation with the original component.
• Confirm that qualified service diagnosis has identified the pressure switch as the source of the concern.
• Inspect related wiring, terminals, sensing connections, and connected controls before replacing the part.

Related Components

• Sensing tube or air-pressure line: Inspect for loose connections, damage, blockage, or deterioration that may affect the pressure signal reaching the switch.
• Wiring terminals and connector connections: Inspect for corrosion, loose connections, damaged insulation, or terminal damage that may interrupt the control circuit.
• Connected control board or control assembly: Inspect the connected control component when diagnosis indicates that the pressure-switch signal is not being recognized.
• Related safety controls: Inspect associated control and safety components when the equipment condition remains unresolved after the pressure-switch circuit has been evaluated.

Frequently Asked Questions

What is Glastender part number 01000550?

Glastender 01000550 is an OEM pressure switch identified for glasswasher liquid-level and low-chemical sensing.

What does a glasswasher pressure switch do?

A pressure switch responds to an air-pressure condition through its sensing connection and changes its electrical contact state for the connected control and safety circuit.

How do I verify that Glastender 01000550 is the correct pressure switch?

Match OEM number 01000550 to the original component, confirm the equipment model and serial number, and compare terminals, mounting details, and the sensing connection.

Should I replace the pressure switch if the equipment has a liquid-level concern?

Not without qualified service diagnosis. A liquid-level concern may also involve sensing tubing, terminals, wiring, connected controls, or another related component.

What should be inspected with a Glastender pressure switch?

Inspect the sensing tube or port, wiring terminals, connector condition, mounting arrangement, and related control or safety components while evaluating the pressure-switch circuit.