{"title":"Pitco Parts","description":"\u003ch2\u003ePitco Parts\u003c\/h2\u003e\n\u003cp\u003ePitco Parts help commercial kitchen operators and service technicians repair ovens, fryers, warmers, ranges, and related foodservice equipment. Match the old part number, equipment model and serial plate, voltage, gas type, dimensions, mounting style, and manufacturer documentation before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow to confirm fitment\u003c\/h3\u003e\n\u003cp\u003eStart with the equipment data plate and compare the installed part against photos, electrical ratings, connector style, and mounting points. Use compatible replacement status unless OEM documentation confirms the part is genuine OEM.\u003c\/p\u003e\n\u003ch3\u003eCommon failure symptoms\u003c\/h3\u003e\n\u003cp\u003eTemperature swings, ignition problems, nuisance shutdowns, failed heat recovery, control errors, and worn hardware can all point to a failed cooking equipment component. Inspect related wiring, thermostats, probes, relays, switches, gas controls, and door hardware before replacing a part.\u003c\/p\u003e\n\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\n\u003cp\u003eDisconnect power and follow lockout procedures before service. Gas, high-voltage, and high-temperature repairs should be handled by a qualified commercial kitchen equipment technician.\u003c\/p\u003e\n\u003ch3\u003eRelated categories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-cooking-equipment-parts\"\u003eCommercial Cooking Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-oven-parts\"\u003eCommercial Oven Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-fryer-parts\"\u003eCommercial Fryer Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-range-parts\"\u003eCommercial Range Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-warmer-parts\"\u003eCommercial Warmer Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order by part number only?\u003c\/strong\u003e\u003cbr\u003eUse the part number as a starting point, but verify model, serial, rating, and mounting details before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these OEM parts?\u003c\/strong\u003e\u003cbr\u003eProduct pages should identify OEM status only when verified. Otherwise, treat the item as a compatible replacement and confirm fitment first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I inspect before ordering?\u003c\/strong\u003e\u003cbr\u003eInspect wiring, controls, sensors, switches, connectors, burners, pilots, door hardware, and heat-related wear that may have caused the failure.\u003c\/p\u003e","products":[{"product_id":"pitco-18600-0016-thermostat-pcc-oem-commercial-fryer-part","title":"Pitco 18600-0016 Thermostat PCC - OEM Commercial Fryer Part","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Pitco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 18600-0016\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 18600-0016\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 18600-0016\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e PCC Thermostat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePitco 18600-0016 is a PCC thermostat used in commercial fryer temperature-control service. This OEM part is identified by Pitco manufacturer part number 18600-0016 and serves as a temperature-sensing control component within the equipment control circuit. A thermostat has an important role in helping the fryer respond to changing oil temperature and maintain the control sequence expected by the equipment. When a temperature-control component is damaged, worn, or electrically compromised, fryer temperature response may become inconsistent and should be evaluated by qualified commercial equipment service personnel. Replacing the correct thermostat can help restore the intended control arrangement when diagnosis identifies the original component as the concern. The correct part number matters because thermostat terminals, sensing arrangements, mounting details, and control relationships can differ between equipment configurations. This Pitco OEM thermostat is intended for buyers who need a clearly identified replacement component rather than a general-purpose substitute. Compare the removed component, its terminals, sensing bulb or probe arrangement when present, and equipment data plate details before ordering. Careful identification helps reduce delays, avoids wrong-part orders, and supports a more efficient commercial fryer repair.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThe Pitco 18600-0016 PCC thermostat is a temperature-control component for commercial fryer equipment. Its role is to sense temperature through its associated sensing arrangement and provide a control response through the fryer control circuit. That response is part of the equipment’s broader heat-control operation and should be considered alongside related terminals, wiring connections, relays or contactors, and mounting hardware. A thermostat does not operate as an isolated repair item. Its condition, connection points, and sensing position can affect how the control circuit responds. When qualified diagnosis points to the thermostat, using the Pitco OEM number 18600-0016 helps identify the intended replacement part.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003ePitco OEM part number 18600-0016 provides a reliable identification point for this PCC thermostat. Matching the original manufacturer part number helps distinguish this component from thermostats that may appear similar but use different terminals, sensing arrangements, mounting details, or control relationships. For commercial fryer service, correct identification supports confident ordering and helps prevent a repair delay caused by selecting the wrong temperature-control part.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA thermostat supports fryer temperature control by sensing changes at its sensing element and responding through the equipment control circuit. As operating temperature changes, the thermostat’s response helps the related control components manage the heating sequence. The exact circuit arrangement depends on the equipment configuration, so the thermostat should be assessed as part of the complete temperature-control system rather than treated as the only possible cause of a temperature concern. For this Pitco PCC thermostat, the practical service focus is correct part identification and comparison with the removed component. Inspect the terminal layout, connector condition, mounting points, and sensing bulb, probe, or capillary routing when visible. Damage, loose connections, improper routing, or a mismatch in the replacement component can affect control response. Qualified diagnosis can determine whether the thermostat, its sensing arrangement, or another related control component requires attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing a thermostat, document the original terminal connections and the routing of any visible sensing bulb, probe, or capillary. Compare those details with Pitco part number 18600-0016 and inspect nearby control connections for heat damage, looseness, or corrosion. Commercial fryer service should be performed by qualified personnel with the equipment safely isolated.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFryer temperature may fluctuate more than expected and should be evaluated through the complete temperature-control circuit.\u003c\/li\u003e\n  \u003cli\u003eThe fryer may respond slowly to temperature changes, which can indicate a need to inspect the thermostat and related control components.\u003c\/li\u003e\n  \u003cli\u003eTemperature control may appear unresponsive during operation and can warrant qualified diagnosis.\u003c\/li\u003e\n  \u003cli\u003eThe heating sequence may cycle irregularly, which may indicate a thermostat, relay, contactor, or wiring concern.\u003c\/li\u003e\n  \u003cli\u003eVisible damage to the sensing bulb, probe, or capillary, when present, should be inspected.\u003c\/li\u003e\n  \u003cli\u003eLoose, discolored, corroded, or heat-damaged thermostat terminals can indicate a connection concern.\u003c\/li\u003e\n  \u003cli\u003eA thermostat that does not match the original terminal layout or sensing arrangement should not be assumed correct for the equipment.\u003c\/li\u003e\n  \u003cli\u003eUnexpected fryer temperature behavior after other control work may indicate that related wiring, mounting, and sensing arrangement need evaluation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Pitco PCC thermostat is associated with commercial cooking equipment and commercial fryer temperature-control service. It is relevant to restaurant kitchens, foodservice maintenance teams, commercial kitchen repair providers, and facilities responsible for fryer operation. In these settings, temperature-control components are important because stable control response supports normal equipment operation and helps service personnel identify concerns within the heat-control circuit. Application should be confirmed against the equipment data plate, serial information, and original component before purchase. Although this is a Pitco OEM thermostat, equipment configurations can vary. Correct identification is especially important where terminal arrangements, sensing components, mounting locations, or related control parts differ between fryer configurations.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Pitco OEM part number 18600-0016 to the original component and service information.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original component is identified as a PCC thermostat.\u003c\/li\u003e\n  \u003cli\u003eCompare the terminal count, terminal layout, and connector arrangement with the removed part.\u003c\/li\u003e\n  \u003cli\u003eInspect the sensing bulb, probe, or capillary arrangement when present and compare its routing.\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting points and physical orientation before purchase.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment data plate and serial information for the unit being serviced.\u003c\/li\u003e\n  \u003cli\u003eInspect related relay or contactor connections when diagnosing a temperature-control concern.\u003c\/li\u003e\n  \u003cli\u003eHave qualified commercial equipment service personnel confirm the repair diagnosis when control-circuit symptoms are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSensing bulb, probe, or capillary when present: inspect for damage, routing concerns, or a mismatch with the original thermostat arrangement.\u003c\/li\u003e\n  \u003cli\u003eControl terminals and wiring connections: inspect for loose connections, corrosion, discoloration, or heat damage that may affect control response.\u003c\/li\u003e\n  \u003cli\u003eRelay or contactor: inspect the related switching component because irregular heating response may involve more than the thermostat.\u003c\/li\u003e\n  \u003cli\u003eThermostat mounting hardware: inspect mounting points and orientation so the replacement component is installed in the same supported position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Pitco part number 18600-0016?\u003c\/h3\u003e\n\u003cp\u003ePitco 18600-0016 is an OEM PCC thermostat used for commercial fryer temperature-control service.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a PCC thermostat do in commercial fryer equipment?\u003c\/h3\u003e\n\u003cp\u003eA PCC thermostat senses temperature through its associated sensing arrangement and responds through the fryer control circuit as part of the heat-control sequence.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I identify the correct replacement thermostat?\u003c\/h3\u003e\n\u003cp\u003eMatch Pitco OEM number 18600-0016, compare the removed thermostat, review terminal layout and mounting points, and compare any visible sensing bulb, probe, or capillary arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eCan irregular fryer temperature indicate a thermostat concern?\u003c\/h3\u003e\n\u003cp\u003eIrregular temperature response may indicate that the thermostat should be inspected, but related wiring, terminals, relays, contactors, and sensing components should also be evaluated by qualified personnel.\u003c\/p\u003e\n\n\u003ch3\u003eShould I compare the sensing arrangement before ordering?\u003c\/h3\u003e\n\u003cp\u003eYes. When a sensing bulb, probe, or capillary is present, compare its condition, routing, and relationship to the original component before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eIs Pitco 18600-0016 a genuine OEM part?\u003c\/h3\u003e\n\u003cp\u003eYes. Part number 18600-0016 is identified as a Pitco OEM PCC thermostat.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Pitco 18600-0016 PCC Thermostat for Commercial Fryers\",\"description\":\"Pitco 18600-0016 PCC thermostat is an OEM temperature-control part for commercial fryers. Compare the original component before ordering.\",\"sku\":\"18600-0016\",\"mpn\":\"18600-0016\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Pitco\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Pitco\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"18600-0016\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"PCC Thermostat\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial Cooking Equipment\"},{\"@type\":\"PropertyValue\",\"name\":\"System Function\",\"value\":\"Temperature control\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Pitco part number 18600-0016?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pitco 18600-0016 is an OEM PCC thermostat used for commercial fryer temperature-control service.\"}},{\"@type\":\"Question\",\"name\":\"What does a PCC thermostat do in commercial fryer equipment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A PCC thermostat senses temperature through its associated sensing arrangement and responds through the fryer control circuit as part of the heat-control sequence.\"}},{\"@type\":\"Question\",\"name\":\"How should I identify the correct replacement thermostat?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Pitco OEM number 18600-0016, compare the removed thermostat, review terminal layout and mounting points, and compare any visible sensing bulb, probe, or capillary arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Can irregular fryer temperature indicate a thermostat concern?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Irregular temperature response may indicate that the thermostat should be inspected, but related wiring, terminals, relays, contactors, and sensing components should also be evaluated by qualified personnel.\"}},{\"@type\":\"Question\",\"name\":\"Should I compare the sensing arrangement before ordering?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. When a sensing bulb, probe, or capillary is present, compare its condition, routing, and relationship to the original component before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Is Pitco 18600-0016 a genuine OEM part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Part number 18600-0016 is identified as a Pitco OEM PCC thermostat.\"}}]}\u003c\/script\u003e","brand":"Pitco","offers":[{"title":"Default Title","offer_id":50092328255711,"sku":"18600-0016","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/files\/pitco-18600-0016-thermostat-pcc-oem-commercial-fryer-part-oem-replacement-part-partsdirectonline-9071045.jpg?v=1783602906"},{"product_id":"pitco-60125402-rx-millivolt-thermostat-200-374f","title":"Pitco 60125402 RX Millivolt Thermostat 200 374F","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Pitco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 60125402\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 60125402\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 60125402\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Millivolt Thermostat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePitco OEM part 60125402 is an RX millivolt thermostat used in commercial cooking equipment temperature-control systems. This thermostat serves as a temperature-sensing and control component, helping the equipment respond as operating temperature changes. In a commercial kitchen, dependable temperature response matters because the heat-control system relies on the thermostat’s sensing input and control-circuit position to support consistent operation. When a thermostat is worn, damaged, incorrectly selected, or improperly connected, it can complicate diagnosis of inconsistent temperature response and may affect the way connected heat-control components respond. This Pitco thermostat is identified by manufacturer part number 60125402, giving technicians and purchasing teams a reliable reference when replacing the original component. Careful part identification helps avoid ordering a control that differs in terminal arrangement, mounting details, or sensing configuration. Compare the removed thermostat before ordering, including its terminals, mounting arrangement, sensing bulb or probe arrangement when present, and routing path. Confirm the equipment data plate, serial information, and Pitco manufacturer part number 60125402 against applicable equipment documentation. These checks help reduce wrong-part orders and support accurate, efficient commercial equipment service.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThe Pitco 60125402 millivolt thermostat monitors temperature and participates in the equipment heat-control circuit. As the sensing element responds to changing temperature, the thermostat changes its control state to support normal temperature regulation. Its role is not simply to provide an on-or-off response; it must also be correctly matched to the equipment’s control arrangement, terminals, sensing element, and mounting location. When the thermostat is suspect, related control-circuit components should also be inspected because a temperature-response concern may involve wiring, terminals, a relay, contactor, sensing element, or another connected control component.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003ePitco OEM part 60125402 provides a clear manufacturer part-number reference for this millivolt thermostat. Matching the Pitco OEM number to the removed component and equipment documentation helps identify the intended replacement and reduces uncertainty during ordering. It also gives service personnel a consistent reference when comparing the thermostat’s terminals, sensing arrangement, mounting details, and control-circuit connection points.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA millivolt thermostat works as part of a temperature-control circuit. Its sensing element is exposed to the temperature condition the equipment is designed to monitor. As that condition changes, the thermostat responds through its control contacts and influences the connected heat-control circuit. The thermostat must be positioned and connected as intended for the system to receive a meaningful temperature signal. A sensing bulb, probe, or capillary arrangement may be associated with this type of control, depending on the equipment configuration. Damage, kinking, poor routing, loose terminals, or differences from the original component can affect service work and replacement selection. Because temperature response also depends on connected controls, a qualified diagnosis should evaluate the thermostat together with its wiring, terminals, relays, contactors, and other relevant heat-control components.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the thermostat, compare the removed component with Pitco part 60125402. Inspect terminal locations, mounting points, and the sensing bulb, probe, or capillary routing when present. Keep any sensing element positioned as found until the equipment-specific service requirements have been confirmed.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUnstable equipment temperature response may indicate that the thermostat and related control circuit should be inspected.\u003c\/li\u003e\n  \u003cli\u003eHeat control that does not respond as expected can indicate a thermostat, terminal, wiring, or connected control issue.\u003c\/li\u003e\n  \u003cli\u003eTemperature changes that appear delayed or inconsistent may warrant evaluation of the sensing element and its routing.\u003c\/li\u003e\n  \u003cli\u003eVisible damage to the thermostat body, terminals, sensing bulb, probe, or capillary should be inspected.\u003c\/li\u003e\n  \u003cli\u003eLoose, corroded, or heat-damaged terminals may indicate a connection concern in the temperature-control circuit.\u003c\/li\u003e\n  \u003cli\u003eA control circuit that cycles unexpectedly after qualified diagnosis may indicate that the thermostat or related components require inspection.\u003c\/li\u003e\n  \u003cli\u003eA sensing bulb, probe, or capillary that is bent, pinched, displaced, or damaged may affect temperature response.\u003c\/li\u003e\n  \u003cli\u003eA replacement thermostat that differs from the original component in terminals, mounting, or sensing arrangement should be evaluated before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Pitco millivolt thermostat is intended for use in verified commercial cooking equipment temperature-control applications. It is relevant to restaurant kitchens, foodservice maintenance teams, commercial kitchen repair providers, and qualified service personnel working with heat-control systems. The exact equipment model application is not stated here, so the thermostat should not be selected from equipment type alone. Confirm Pitco OEM part number 60125402 against the original component, applicable equipment documentation, and the equipment data plate. A careful comparison of the thermostat’s terminals, mounting arrangement, and sensing-element details helps support accurate ordering for commercial equipment service.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Pitco OEM part number 60125402 to the original component and applicable equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment manufacturer, model, and serial information from the data plate.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed thermostat’s terminal positions and connection arrangement.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting points and the physical orientation of the original component.\u003c\/li\u003e\n  \u003cli\u003eInspect the sensing bulb, probe, or capillary arrangement when present.\u003c\/li\u003e\n  \u003cli\u003eCompare the sensing element routing path with the original installation.\u003c\/li\u003e\n  \u003cli\u003eInspect connected wiring and terminals for damage or heat exposure before attributing a concern to the thermostat.\u003c\/li\u003e\n  \u003cli\u003eReview related heat-control components, such as relays or contactors, as part of qualified diagnosis.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on product appearance alone when selecting a temperature-control component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSensing bulb, probe, or capillary: Inspect the associated sensing arrangement for damage, displacement, pinching, or routing differences that may affect temperature response.\u003c\/li\u003e\n  \u003cli\u003eControl terminals and wiring: Check connection points for looseness, corrosion, heat damage, or terminal-position differences before replacing the thermostat.\u003c\/li\u003e\n  \u003cli\u003eRelay or contactor: Inspect the connected switching component because a heat-control concern may involve more than the thermostat.\u003c\/li\u003e\n  \u003cli\u003eThermostat mounting hardware: Compare brackets, fasteners, and mounting points to help ensure the replacement is positioned like the original component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Pitco part 60125402?\u003c\/h3\u003e\n\u003cp\u003ePitco part 60125402 is an RX millivolt thermostat used as a temperature-control component in commercial cooking equipment applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a millivolt thermostat do?\u003c\/h3\u003e\n\u003cp\u003eA millivolt thermostat senses changing temperature conditions and participates in the connected heat-control circuit to support temperature regulation.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I confirm this Pitco thermostat before ordering?\u003c\/h3\u003e\n\u003cp\u003eMatch Pitco OEM number 60125402 to the original component and applicable equipment documentation. Also compare terminals, mounting details, and the sensing bulb, probe, or capillary arrangement when present.\u003c\/p\u003e\n\n\u003ch3\u003eCan a temperature problem always be traced to the thermostat?\u003c\/h3\u003e\n\u003cp\u003eNo. Inconsistent temperature response may involve the thermostat, sensing element, wiring, terminals, relay, contactor, or another connected heat-control component. Qualified diagnosis is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eShould the sensing bulb or capillary be compared during replacement?\u003c\/h3\u003e\n\u003cp\u003eYes. When the original thermostat includes a sensing bulb, probe, or capillary, compare its condition, routing, and connection arrangement with the replacement and equipment requirements.\u003c\/p\u003e\n\n\u003ch3\u003eIs model fitment confirmed for Pitco 60125402?\u003c\/h3\u003e\n\u003cp\u003eSpecific equipment model fitment is not stated here. Confirm the equipment model and serial information, original component details, and Pitco OEM number 60125402 before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Pitco 60125402 RX Millivolt Thermostat\",\"description\":\"Pitco 60125402 RX millivolt thermostat for commercial cooking equipment temperature control. Match the OEM number before ordering.\",\"sku\":\"60125402\",\"mpn\":\"60125402\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Pitco\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Pitco\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"60125402\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Millivolt Thermostat\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial Cooking Equipment\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Pitco part 60125402?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pitco part 60125402 is an RX millivolt thermostat used as a temperature-control component in commercial cooking equipment applications.\"}},{\"@type\":\"Question\",\"name\":\"What does a millivolt thermostat do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A millivolt thermostat senses changing temperature conditions and participates in the connected heat-control circuit to support temperature regulation.\"}},{\"@type\":\"Question\",\"name\":\"How should I confirm this Pitco thermostat before ordering?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Pitco OEM number 60125402 to the original component and applicable equipment documentation. Also compare terminals, mounting details, and the sensing bulb, probe, or capillary arrangement when present.\"}},{\"@type\":\"Question\",\"name\":\"Can a temperature problem always be traced to the thermostat?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Inconsistent temperature response may involve the thermostat, sensing element, wiring, terminals, relay, contactor, or another connected heat-control component. Qualified diagnosis is recommended.\"}},{\"@type\":\"Question\",\"name\":\"Should the sensing bulb or capillary be compared during replacement?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. When the original thermostat includes a sensing bulb, probe, or capillary, compare its condition, routing, and connection arrangement with the replacement and equipment requirements.\"}},{\"@type\":\"Question\",\"name\":\"Is model fitment confirmed for Pitco 60125402?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Specific equipment model fitment is not stated here. Confirm the equipment model and serial information, original component details, and Pitco OEM number 60125402 before ordering.\"}}]}\u003c\/script\u003e","brand":"Pitco","offers":[{"title":"Default Title","offer_id":50092328288479,"sku":"60125402","price":251.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/files\/pitco-60125402-rx-millivolt-thermostat-200-374f-oem-replacement-part-partsdirectonline-9084730.webp?v=1783520046"},{"product_id":"pitco-60125501-thermopile-millivolt","title":"Pitco 60125501 Thermopile, Millivolt","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Pitco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 60125501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 60125501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 60125501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Thermopile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Pitco 60125501 millivolt thermopile is an OEM component used in commercial cooking equipment gas-control circuits. Positioned to receive heat from the pilot flame, a thermopile develops a small millivolt electrical output that supports operation of the connected gas safety and control components. Its role is important because the equipment must receive the proper flame-produced signal before the gas-control sequence can continue as intended. For commercial kitchen service, the thermopile should be identified by Pitco manufacturer part number 60125501 before ordering. A visually similar component may have different lead length, terminal arrangement, mounting details, or electrical characteristics, so the original component and equipment data plate deserve careful comparison. Replacing a damaged or weak thermopile with the correct OEM part helps technicians restore a properly identified component in the gas safety circuit while reducing the risk of a wrong-part order. This part is intended for qualified commercial equipment service. Its condition should be considered alongside the pilot flame, connected wiring, mounting position, and gas-control components when diagnosing an ignition or flame-holding concern.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eA millivolt thermopile converts heat from a pilot flame into a low-voltage electrical signal. In an applicable commercial cooking equipment gas-control circuit, that signal is used by connected safety and control components as part of the normal operating sequence. The Pitco 60125501 thermopile is therefore a small but important link between pilot flame heat and the equipment-side control circuit. When the thermopile, pilot flame, connections, or related gas-control components require attention, the equipment may not respond normally. Because several connected parts can produce similar operating concerns, the thermopile should be evaluated as one part of the complete circuit rather than assumed to be the sole cause.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003ePitco manufacturer part number 60125501 provides a reliable identification point for this OEM thermopile. Matching the original Pitco part number helps distinguish this component from similar millivolt thermopiles that may differ in their physical arrangement or connection details. Using the identified OEM part supports clearer service communication and reduces uncertainty when replacing the removed component.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eDuring normal operation, the pilot flame heats the thermopile. The thermopile responds to that heat by producing a millivolt signal. That signal travels through its connected leads and terminals to the applicable gas safety and control components. When the pilot flame is stable and the circuit components are in suitable condition, the signal can support the intended control sequence. A weak, interrupted, or inconsistent signal can also be influenced by factors beyond the thermopile itself, including pilot flame condition, placement of the sensing end, loose connections, damaged leads, or a concern in a connected control component. For that reason, qualified service personnel should inspect the complete applicable circuit and compare the removed part with Pitco 60125501 before installation.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the thermopile, compare the removed component’s markings, lead routing, terminal ends, and mounting position with Pitco 60125501. Inspect the pilot-flame contact area and connected terminals for damage, contamination, looseness, or heat-related wear. Gas-fired equipment service should be performed by qualified personnel.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePilot flame is present, but the connected gas-control sequence may not continue normally.\u003c\/li\u003e\n  \u003cli\u003eEquipment may have difficulty maintaining the expected flame-related control response.\u003c\/li\u003e\n  \u003cli\u003eA millivolt signal concern may indicate that the thermopile and connected circuit should be inspected.\u003c\/li\u003e\n  \u003cli\u003eHeat damage, worn insulation, or damaged thermopile leads should be inspected.\u003c\/li\u003e\n  \u003cli\u003eLoose, corroded, or heat-affected terminals can indicate a connection concern in the circuit.\u003c\/li\u003e\n  \u003cli\u003eAn incorrectly positioned sensing end may indicate that pilot-flame contact should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eIntermittent operation may indicate that the thermopile, pilot flame, and connected components require diagnosis.\u003c\/li\u003e\n  \u003cli\u003eA thermopile with physical damage, discoloration, or altered mounting condition should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA pilot flame that does not adequately heat the thermopile can indicate a related pilot-system concern.\u003c\/li\u003e\n  \u003cli\u003eReplacement should be considered only after the original component and connected gas-control circuit have been evaluated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Pitco thermopile is a commercial cooking equipment service component for applicable gas-control circuits. It is relevant to restaurant kitchens, foodservice maintenance teams, commercial kitchen repair providers, and qualified technicians responsible for gas-fired foodservice equipment. The exact equipment application is not stated here, so fitment should be confirmed from the equipment data plate, service information, and the removed component before purchase. Careful identification is especially important in commercial kitchens, where a gas-control component must be selected according to the correct manufacturer part number and physical arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Pitco manufacturer part number 60125501 to the removed component and applicable service information.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the required part type is a millivolt thermopile.\u003c\/li\u003e\n  \u003cli\u003eCompare the original component markings with the product identification.\u003c\/li\u003e\n  \u003cli\u003eReview the product image against the removed component.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment manufacturer and information shown on the equipment data plate.\u003c\/li\u003e\n  \u003cli\u003eCompare lead routing, terminal ends, and connection arrangement before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect the mounting position and sensing-end orientation on the removed component.\u003c\/li\u003e\n  \u003cli\u003eCheck connected wiring and terminals for visible damage or heat-related wear.\u003c\/li\u003e\n  \u003cli\u003eConfirm that qualified personnel have evaluated the pilot flame and applicable gas-control circuit.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on appearance alone when identifying a thermopile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePilot assembly: Inspect the pilot flame and its contact with the thermopile because flame heat is required for thermopile operation.\u003c\/li\u003e\n  \u003cli\u003eGas-control component: Evaluate the connected gas safety or control component because it receives the millivolt signal from the thermopile.\u003c\/li\u003e\n  \u003cli\u003eThermopile leads and terminals: Check for looseness, corrosion, damaged insulation, or heat-related wear that can interrupt the circuit.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware: Inspect the mounting points to confirm that the replacement thermopile can be positioned like the removed component.\u003c\/li\u003e\n  \u003cli\u003eEquipment data plate: Review the equipment identification details to support accurate part selection for the applicable unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Pitco part number 60125501?\u003c\/h3\u003e\n\u003cp\u003ePitco 60125501 is a millivolt thermopile used in an applicable commercial cooking equipment gas-control circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a millivolt thermopile do?\u003c\/h3\u003e\n\u003cp\u003eA millivolt thermopile converts heat from a pilot flame into a small electrical signal used by connected gas safety and control components.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I identify the correct thermopile?\u003c\/h3\u003e\n\u003cp\u003eMatch Pitco manufacturer part number 60125501, compare the removed component, review the product image, and confirm the equipment data plate information.\u003c\/p\u003e\n\n\u003ch3\u003eCan a pilot flame concern affect thermopile operation?\u003c\/h3\u003e\n\u003cp\u003eYes. Because the thermopile depends on pilot-flame heat, pilot flame condition and thermopile placement should be evaluated with the connected circuit.\u003c\/p\u003e\n\n\u003ch3\u003eShould the connected wiring be inspected when replacing a thermopile?\u003c\/h3\u003e\n\u003cp\u003eYes. Inspect the leads, terminals, and connected gas-control components for damage, looseness, corrosion, or heat-related wear.\u003c\/p\u003e\n\n\u003ch3\u003eIs this thermopile intended for qualified commercial equipment service?\u003c\/h3\u003e\n\u003cp\u003eYes. Work involving gas-fired commercial cooking equipment and gas-control circuits should be performed by qualified personnel.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Pitco 60125501 Millivolt Thermopile\",\"description\":\"Pitco 60125501 millivolt thermopile for applicable commercial cooking equipment gas-control circuits. Match the OEM part number before ordering.\",\"sku\":\"60125501\",\"mpn\":\"60125501\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Pitco\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Pitco\"},\"image\":\"Pitco 60125501 millivolt thermopile\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"60125501\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Thermopile\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Pitco part number 60125501?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pitco 60125501 is a millivolt thermopile used in an applicable commercial cooking equipment gas-control circuit.\"}},{\"@type\":\"Question\",\"name\":\"What does a millivolt thermopile do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A millivolt thermopile converts heat from a pilot flame into a small electrical signal used by connected gas safety and control components.\"}},{\"@type\":\"Question\",\"name\":\"How should I identify the correct thermopile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Pitco manufacturer part number 60125501, compare the removed component, review the product image, and confirm the equipment data plate information.\"}},{\"@type\":\"Question\",\"name\":\"Can a pilot flame concern affect thermopile operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Because the thermopile depends on pilot-flame heat, pilot flame condition and thermopile placement should be evaluated with the connected circuit.\"}},{\"@type\":\"Question\",\"name\":\"Should the connected wiring be inspected when replacing a thermopile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Inspect the leads, terminals, and connected gas-control components for damage, looseness, corrosion, or heat-related wear.\"}},{\"@type\":\"Question\",\"name\":\"Is this thermopile intended for qualified commercial equipment service?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Work involving gas-fired commercial cooking equipment and gas-control circuits should be performed by qualified personnel.\"}}]}\u003c\/script\u003e","brand":"Pitco","offers":[{"title":"Default Title","offer_id":50105513279711,"sku":"60125501","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/files\/pitco-60125501-thermopile-millivolt-oem-replacement-part-partsdirectonline-2529073.webp?v=1782194285"},{"product_id":"pitco-pp10084-thermopile","title":"Pitco PP10084 Thermopile","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Pitco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e PP10084\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PP10084\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PP10084\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Thermopile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePitco PP10084 Thermopile is a verified OEM thermopile identified for commercial cooking equipment service. This heat-responsive electrical component develops a small electrical signal when exposed to heat and serves a role in the equipment control circuit designed around it. Reliable response from the installed thermopile matters because its signal is part of the control arrangement’s intended operation. When replacing an original component, the verified Pitco manufacturer part number PP10084 gives technicians and buyers a dependable identification point. It is useful for comparing the removed thermopile with the replacement listing, including the visible markings and overall component style. A thermopile concern should not be assumed from equipment behavior alone; connected wiring, terminals, mounting condition, and other control-circuit components can also require attention. This listing identifies the part as a Pitco PP10084 Thermopile, but it does not establish model-specific fitment, dimensions, electrical values, mounting configuration, or equipment location. Confirm the equipment model and serial number from its data plate, compare the original component carefully, and use applicable manufacturer documentation or qualified commercial equipment service before ordering or installation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThe Pitco PP10084 Thermopile functions as a heat-responsive electrical component in a commercial cooking equipment control circuit. As the thermopile receives heat, it produces a small electrical signal used by the connected control arrangement as designed for that equipment. Its purpose is not to operate independently; its response works together with the associated wiring, connection points, mounting position, and other components in the circuit. Using the verified PP10084 manufacturer part number helps identify the correct replacement reference when the original thermopile requires evaluation. Because control-circuit concerns can have more than one cause, the thermopile, its connections, and related components should be inspected together by qualified commercial equipment service personnel.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003ePitco PP10084 is identified by a verified manufacturer part number, helping technicians and buyers compare the replacement directly with the original component. Using the correct OEM identification supports more confident ordering and reduces the chance of selecting a similar-looking thermopile with different connection, mounting, or application requirements. Confirm the PP10084 marking, equipment model, serial number, and original component details before ordering.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHeat exposure causes a thermopile to develop a small electrical output. In the intended commercial cooking equipment arrangement, that output is supplied to the connected control circuit so the equipment can respond according to its manufacturer-designed sequence. The thermopile therefore depends on correct placement, secure connections, and the condition of the related circuit to provide its intended response. A weak or absent response does not by itself establish that the thermopile is the only issue. Wiring, terminals, connection condition, mounting hardware, and other control-side components may affect circuit operation as well. During service, the original component should be compared with the Pitco PP10084 replacement reference, while the surrounding connections and component condition are evaluated. Equipment-specific installation details, electrical requirements, and control sequence must be confirmed from applicable manufacturer documentation for the particular unit.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the component, compare the original Pitco PP10084 marking, overall configuration, connection arrangement, and mounting relationship with the replacement. Inspect connected components and mounting hardware for visible damage, corrosion, looseness, or heat-related wear.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIntermittent control-circuit response may indicate that the thermopile, its connections, and related components should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA thermopile with visible cracking, deformation, corrosion, or heat-related wear may require replacement evaluation.\u003c\/li\u003e\n  \u003cli\u003eLoose, damaged, or contaminated terminals associated with the thermopile can indicate a connection concern that needs attention.\u003c\/li\u003e\n  \u003cli\u003eEquipment behavior that changes after the original component has been disturbed may indicate that mounting and connection condition should be checked.\u003c\/li\u003e\n  \u003cli\u003eAn absent or inconsistent thermopile signal during qualified diagnosis may indicate that the component and connected circuit require evaluation.\u003c\/li\u003e\n  \u003cli\u003eRepeated control-related concerns may indicate that the thermopile should be considered alongside the wiring and other related control components.\u003c\/li\u003e\n  \u003cli\u003eAn original thermopile that lacks the expected Pitco PP10084 identification may indicate that previous part selection should be reviewed.\u003c\/li\u003e\n  \u003cli\u003ePhysical movement, insecure mounting, or damage around the original component may indicate that both the thermopile and its mounting hardware should be inspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThe Pitco PP10084 Thermopile is identified for commercial cooking equipment service. It is suited to foodservice maintenance environments where technicians and operators need a manufacturer-identified replacement component for an existing equipment repair. Common commercial settings may include restaurant kitchens, institutional kitchens, foodservice facilities, and commercial kitchen repair operations. Because model-specific fitment is not supplied, the part should not be assigned to a particular appliance style or control arrangement without confirming the equipment data plate and applicable documentation. The verified Pitco PP10084 number is the primary ordering reference, supported by a direct comparison with the removed component.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the Pitco manufacturer part number PP10084 to the original component whenever possible.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the required part type is a thermopile.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement product image with the removed component.\u003c\/li\u003e\n  \u003cli\u003eConfirm the Pitco equipment model and serial number from the equipment data plate.\u003c\/li\u003e\n  \u003cli\u003eReview the original component markings for part-number consistency.\u003c\/li\u003e\n  \u003cli\u003eCompare the original component’s overall configuration before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect the connection arrangement and related wiring condition before replacing the part.\u003c\/li\u003e\n  \u003cli\u003eConfirm the mounting relationship and available clearance on the equipment.\u003c\/li\u003e\n  \u003cli\u003eUse applicable equipment documentation or qualified commercial equipment service to confirm model-specific fitment.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on appearance alone when selecting a thermopile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConnected wiring and connection points: Inspect for damage, corrosion, looseness, or wear that may affect the component’s electrical response.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware: Confirm that the original component is held securely and that related hardware shows no visible damage or distortion.\u003c\/li\u003e\n  \u003cli\u003eOriginal component markings: Compare all readable markings on the removed component with Pitco PP10084 before selecting a replacement.\u003c\/li\u003e\n  \u003cli\u003eEquipment data plate: Confirm the equipment model and serial number to support model-specific fitment review.\u003c\/li\u003e\n  \u003cli\u003eRelated control-side components: A qualified technician should evaluate associated components when a thermopile-related concern is being diagnosed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Pitco PP10084 part?\u003c\/h3\u003e\n\u003cp\u003ePitco PP10084 is a verified manufacturer part number for a thermopile used in commercial cooking equipment service.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a thermopile do?\u003c\/h3\u003e\n\u003cp\u003eA thermopile is a heat-responsive electrical component that produces a small electrical signal for an equipment control arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eIs PP10084 a verified Pitco OEM part number?\u003c\/h3\u003e\n\u003cp\u003eYes. PP10084 is a verified Pitco manufacturer part number for this thermopile.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I confirm that PP10084 is the correct thermopile?\u003c\/h3\u003e\n\u003cp\u003eMatch the PP10084 marking to the original component, compare the part configuration, and confirm the equipment model and serial number from the data plate.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm fitment for a specific Pitco model?\u003c\/h3\u003e\n\u003cp\u003eNo model-specific fitment is supplied. Confirm fitment through applicable equipment documentation or qualified commercial equipment service before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should be inspected with a thermopile?\u003c\/h3\u003e\n\u003cp\u003eInspect connected wiring, connection points, mounting hardware, original component markings, and related control-side components for visible damage or wear.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Pitco PP10084 Thermopile\",\"description\":\"Pitco PP10084 thermopile for commercial cooking equipment service. Compare the original component and confirm model and serial number before ordering.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Pitco\"},\"mpn\":\"PP10084\",\"sku\":\"PP10084\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the Pitco PP10084 part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pitco PP10084 is a verified manufacturer part number for a thermopile used in commercial cooking equipment service.\"}},{\"@type\":\"Question\",\"name\":\"What does a thermopile do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A thermopile is a heat-responsive electrical component that produces a small electrical signal for an equipment control arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Is PP10084 a verified Pitco OEM part number?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. PP10084 is a verified Pitco manufacturer part number for this thermopile.\"}},{\"@type\":\"Question\",\"name\":\"How can I confirm that PP10084 is the correct thermopile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match the PP10084 marking to the original component, compare the part configuration, and confirm the equipment model and serial number from the data plate.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm fitment for a specific Pitco model?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No model-specific fitment is supplied. Confirm fitment through applicable equipment documentation or qualified commercial equipment service before ordering.\"}},{\"@type\":\"Question\",\"name\":\"What should be inspected with a thermopile?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect connected wiring, connection points, mounting hardware, original component markings, and related control-side components for visible damage or wear.\"}}]}\u003c\/script\u003e","brand":"Pitco","offers":[{"title":"Default Title","offer_id":50105523732703,"sku":"PP10084","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/files\/pitco-pp10084-thermopile-oem-replacement-part-partsdirectonline-6784533.webp?v=1781779998"},{"product_id":"pitco-60130901-pilot-burner-ignitor-assembly","title":"Pitco 60130901 Pilot Burner\/Ignitor Assembly - Commercial Equipment Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Pitco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 60130901\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 60130901\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 60130901\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Pilot Burner\/Ignitor Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePitco 60130901 is a pilot burner\/ignitor assembly used in the ignition and gas train area of commercial fryer equipment. This OEM-identified component brings the pilot burner and ignitor functions together in one assembly, making correct part-number identification especially important when servicing equipment that depends on a reliable ignition sequence. A properly selected assembly helps a technician restore the original component arrangement rather than adapting a similar-looking ignition part with different mounting, connection, or orientation details. In commercial kitchen service, ignition-related components deserve close attention because they work alongside the fryer gas control system. Damage, wear, loose connections, contamination, or an incorrect replacement component can complicate diagnosis and delay return to service. Pitco part number 60130901 gives buyers a specific manufacturer part number to compare against the removed assembly and the equipment data plate before ordering. This part is intended for commercial equipment service where the original Pitco 60130901 pilot burner\/ignitor assembly has been identified. Review the original component, mounting arrangement, and connected wiring or gas-side connections carefully. Confirming those details before purchase helps reduce wrong-part orders and supports a more orderly repair process.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThe Pitco 60130901 pilot burner\/ignitor assembly supports the ignition process within a commercial fryer ignition and gas train application. Its pilot burner portion is associated with the pilot flame area, while the ignitor portion is associated with initiating ignition. Together, these functions support the equipment’s normal burner-lighting sequence when the surrounding gas controls, electrical connections, and safety-related components are operating correctly. Because this is an assembly rather than a general hardware item, it should be selected by the verified manufacturer part number and compared with the original component. The assembly’s physical arrangement, mounting points, connected lead arrangement, and gas-side connection details can all matter during service.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003ePitco OEM part number 60130901 provides a reliable identification point for this pilot burner\/ignitor assembly. Matching the manufacturer part number to the original component helps avoid ordering an ignition part that appears similar but differs in its assembly layout or service connection details. Using the verified OEM number also gives technicians and purchasing teams a clearer reference when reviewing equipment records, parts documentation, and the removed component before installation.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA pilot burner\/ignitor assembly takes part in the fryer’s ignition sequence. The ignitor portion is positioned to support ignition at the pilot burner area, and the pilot burner portion is part of the gas-side arrangement associated with establishing pilot operation. The exact sequence depends on the equipment configuration and the condition of related controls and connections, so the assembly should not be treated as the only possible cause of an ignition concern. For dependable operation, the assembly must remain correctly positioned and connected within the original equipment arrangement. Its mounting, ignition connection, pilot gas connection, surrounding burner components, and related control circuit should be evaluated as appropriate by qualified commercial gas equipment personnel. Replacing a visibly damaged or incorrectly identified assembly without reviewing related components may leave the underlying service issue unresolved.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing the original assembly, document its mounting position, lead routing, and connection orientation. Compare the removed component directly with Pitco 60130901, then inspect nearby mounting hardware and connected ignition or gas-side components for damage, looseness, or contamination. Commercial gas equipment service should be performed by qualified personnel.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFailure of the fryer ignition sequence may indicate that the pilot burner\/ignitor assembly and related components should be inspected.\u003c\/li\u003e\n  \u003cli\u003eAn intermittent ignition condition can indicate a need to evaluate the ignitor connection, assembly position, and surrounding controls.\u003c\/li\u003e\n  \u003cli\u003eVisible damage to the pilot burner or ignitor portion should be inspected before returning equipment to service.\u003c\/li\u003e\n  \u003cli\u003eA loose, damaged, or poorly routed ignition lead may indicate a connection issue near the assembly.\u003c\/li\u003e\n  \u003cli\u003eSigns of contamination around the pilot burner area can indicate that the assembly and nearby gas-side components need evaluation.\u003c\/li\u003e\n  \u003cli\u003eAn assembly that does not match the original mounting arrangement should be inspected for incorrect part selection.\u003c\/li\u003e\n  \u003cli\u003eRepeated burner-lighting concerns may indicate that the pilot burner\/ignitor assembly and related gas control components require diagnosis.\u003c\/li\u003e\n  \u003cli\u003eCorrosion, bent mounting areas, or damaged connection points can indicate that replacement of the assembly may be needed.\u003c\/li\u003e\n  \u003cli\u003eA pilot-related concern after other ignition components have been evaluated may indicate that this assembly should be considered during diagnosis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003ePitco 60130901 is identified for commercial fryer ignition and gas train service. It is suited to commercial kitchen repair work where the original pilot burner\/ignitor assembly carries the same Pitco manufacturer part number. Typical buyers include restaurant maintenance teams, foodservice equipment service companies, institutional kitchen personnel, and technicians responsible for commercial cooking equipment. Application should be confirmed against the equipment data plate, service documentation, and the removed component before ordering. Although this assembly is associated with fryer ignition and gas train service, equipment-specific fitment has not been provided here. A matching OEM number is the primary identification reference, followed by a careful comparison of the original assembly’s connections, mounting arrangement, and orientation.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Pitco OEM part number 60130901 to the original component and applicable equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm the manufacturer is Pitco and compare the equipment data plate details before purchase.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed pilot burner\/ignitor assembly with the product image and product title.\u003c\/li\u003e\n  \u003cli\u003eReview the original assembly’s mounting points and overall orientation.\u003c\/li\u003e\n  \u003cli\u003eConfirm the location and arrangement of the ignition lead or connector on the original component.\u003c\/li\u003e\n  \u003cli\u003eInspect the pilot gas-side connection arrangement before selecting a replacement.\u003c\/li\u003e\n  \u003cli\u003eCheck for damage, corrosion, bent brackets, or missing mounting hardware that may affect installation.\u003c\/li\u003e\n  \u003cli\u003eVerify the equipment model and serial number against available service documentation.\u003c\/li\u003e\n  \u003cli\u003eHave qualified commercial gas equipment personnel evaluate related ignition and gas control components when a service concern is present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hardware: Inspect screws, brackets, and retaining hardware because secure positioning can affect how the assembly sits in the original equipment arrangement.\u003c\/li\u003e\n  \u003cli\u003eIgnition lead or connector: Inspect the connected ignition lead and connection point for damage, looseness, or routing concerns before replacing the assembly.\u003c\/li\u003e\n  \u003cli\u003ePilot gas-side connection: Inspect the connection serving the pilot burner area for condition and proper attachment as appropriate during qualified service.\u003c\/li\u003e\n  \u003cli\u003eRelated gas control components: Evaluate the surrounding gas control components when an ignition concern continues after the assembly has been inspected.\u003c\/li\u003e\n  \u003cli\u003eBurner-area components: Inspect nearby burner-area components for contamination, damage, or alignment concerns that may contribute to an ignition-related service issue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Pitco part number 60130901?\u003c\/h3\u003e\n\u003cp\u003ePitco 60130901 is a pilot burner\/ignitor assembly identified for commercial fryer ignition and gas train service.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a pilot burner\/ignitor assembly do?\u003c\/h3\u003e\n\u003cp\u003eIt supports the equipment ignition sequence by combining a pilot burner function with an ignitor function in one assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I confirm that 60130901 is the correct part?\u003c\/h3\u003e\n\u003cp\u003eMatch the Pitco OEM number 60130901 to the original component and applicable equipment documentation, then compare the mounting, connection, and orientation details.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm fitment for every Pitco fryer?\u003c\/h3\u003e\n\u003cp\u003eNo. Equipment-specific fitment is not provided here. Confirm the equipment model and serial number with available service documentation before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eShould related ignition components be inspected when replacing this assembly?\u003c\/h3\u003e\n\u003cp\u003eYes. The ignition lead or connector, mounting hardware, pilot gas-side connection, nearby burner-area components, and related gas controls should be evaluated as appropriate.\u003c\/p\u003e\n\n\u003ch3\u003eCan a pilot burner\/ignitor assembly be the only cause of an ignition issue?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily. An ignition concern can involve the assembly, its connections, mounting, surrounding gas controls, or other related equipment components.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Pitco 60130901 Pilot Burner\/Ignitor Assembly\",\"description\":\"Pitco 60130901 pilot burner\/ignitor assembly for commercial fryer ignition and gas train service. Match the OEM number before ordering.\",\"sku\":\"60130901\",\"mpn\":\"60130901\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Pitco\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Pitco\"},\"image\":\"Pitco 60130901 pilot burner\/ignitor assembly for commercial fryer service\",\"category\":\"Commercial Fryer Parts\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Pitco part number 60130901?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pitco 60130901 is a pilot burner\/ignitor assembly identified for commercial fryer ignition and gas train service.\"}},{\"@type\":\"Question\",\"name\":\"What does a pilot burner\/ignitor assembly do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It supports the equipment ignition sequence by combining a pilot burner function with an ignitor function in one assembly.\"}},{\"@type\":\"Question\",\"name\":\"How should I confirm that 60130901 is the correct part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match the Pitco OEM number 60130901 to the original component and applicable equipment documentation, then compare the mounting, connection, and orientation details.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm fitment for every Pitco fryer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Equipment-specific fitment is not provided here. Confirm the equipment model and serial number with available service documentation before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Should related ignition components be inspected when replacing this assembly?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The ignition lead or connector, mounting hardware, pilot gas-side connection, nearby burner-area components, and related gas controls should be evaluated as appropriate.\"}},{\"@type\":\"Question\",\"name\":\"Can a pilot burner\/ignitor assembly be the only cause of an ignition issue?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not necessarily. An ignition concern can involve the assembly, its connections, mounting, surrounding gas controls, or other related equipment components.\"}}]}\u003c\/script\u003e","brand":"Pitco","offers":[{"title":"Default Title","offer_id":50572121964767,"sku":"60130901","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/files\/pitco-60130901-pilot-burnerignitor-assembly-commercial-equipment-replacement-oem-replacement-part-partsdirectonline-6185251.jpg?v=1784182928"}],"url":"https:\/\/partsdirectonline.com\/collections\/pitco-parts.oembed","provider":"PartsDirectonline","version":"1.0","type":"link"}