{"title":"Commercial Cooking Equipment Parts","description":"\u003ch2\u003eCommercial Cooking Equipment Parts\u003c\/h2\u003e\n\u003cp\u003eCommercial Cooking Equipment Parts help commercial kitchen operators and service technicians repair ovens, fryers, warmers, ranges, and related foodservice equipment. Match the old part number, equipment model and serial plate, voltage, gas type, dimensions, mounting style, and manufacturer documentation before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow to confirm fitment\u003c\/h3\u003e\n\u003cp\u003eStart with the equipment data plate and compare the installed part against photos, electrical ratings, connector style, and mounting points. Use compatible replacement status unless OEM documentation confirms the part is genuine OEM.\u003c\/p\u003e\n\u003ch3\u003eCommon failure symptoms\u003c\/h3\u003e\n\u003cp\u003eTemperature swings, ignition problems, nuisance shutdowns, failed heat recovery, control errors, and worn hardware can all point to a failed cooking equipment component. Inspect related wiring, thermostats, probes, relays, switches, gas controls, and door hardware before replacing a part.\u003c\/p\u003e\n\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\n\u003cp\u003eDisconnect power and follow lockout procedures before service. Gas, high-voltage, and high-temperature repairs should be handled by a qualified commercial kitchen equipment technician.\u003c\/p\u003e\n\u003ch3\u003eRelated categories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-cooking-equipment-parts\"\u003eCommercial Cooking Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-oven-parts\"\u003eCommercial Oven Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-fryer-parts\"\u003eCommercial Fryer Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-range-parts\"\u003eCommercial Range Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/commercial-warmer-parts\"\u003eCommercial Warmer Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan I order by part number only?\u003c\/strong\u003e\u003cbr\u003eUse the part number as a starting point, but verify model, serial, rating, and mounting details before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these OEM parts?\u003c\/strong\u003e\u003cbr\u003eProduct pages should identify OEM status only when verified. Otherwise, treat the item as a compatible replacement and confirm fitment first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I inspect before ordering?\u003c\/strong\u003e\u003cbr\u003eInspect wiring, controls, sensors, switches, connectors, burners, pilots, door hardware, and heat-related wear that may have caused the failure.\u003c\/p\u003e\n\n\u003c!-- PDO_ACADEMY_COLLECTION_LINKS_V1 --\u003e\n\u003csection class=\"pdo-academy-collection-links\" aria-label=\"Related commercial equipment Academy guides\"\u003e\n  \u003ch2\u003eRelated Commercial Equipment Guides\u003c\/h2\u003e\n  \u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-cooking-equipment-academy\"\u003eCommercial Cooking Equipment Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-oven-academy\"\u003eCommercial Oven Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-fryer-academy\"\u003eCommercial Fryer Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003c!-- PDO_ENTITY_GRAPH_V1 --\u003e\n\u003csection class=\"pdo-entity-graph\" aria-label=\"Related commercial equipment knowledge graph\"\u003e\n  \u003ch2\u003eRelated Commercial Equipment Knowledge\u003c\/h2\u003e\n  \u003cp\u003eThese links connect this collection to supporting Academy resources and representative catalog entities.\u003c\/p\u003e\n  \u003ch3\u003econnects to Academy\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/pages\/commercial-equipment-parts-service-academy\"\u003eCommercial Equipment Parts \u0026amp; Service Academy\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003econnects to representative part\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/door-frame-heater-receptacle-6-wire\"\u003e2-5\/8 Inch x 1 Inch Door Frame Heater Receptacle – 6 Wire Anti-Sweat OEM\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/american-panel-fan-delay-control\"\u003eAmerican Panel Fan Delay Control – OEM Walk-In Cooler \u0026amp; Freezer Fan Control\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/american-panel-heated-pressure-relief-port\"\u003eAmerican Panel Heated Pressure Relief Port – OEM Walk-In Cooler \u0026amp; Freezer Vent\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/american-panel-magnetic-dart-mount-gasket\"\u003eAmerican Panel Magnetic Dart-Mount Door Gasket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/american-panel-pull-handle\"\u003eAmerican Panel Pull Handle – 12-7\/8 Inch Flush Deadbolt Locking Handle, Brushed Chrome OEM\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/american-panel-snap-in-magnetic-door-gasket\"\u003eAmerican Panel Snap-In Magnetic Gasket OEM Cooler \u0026amp; Freezer Door Seal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/anets-p8900-47-thermocouple\"\u003eAnets P8900-47 Thermocouple\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/torque-rod\"\u003eAnthony \/ Hussmann Torque Rod 29 Inch Hex | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/anthony-narrow-dart-mount-gasket\"\u003eAnthony Dart Mount Narrow Gasket – OEM Cooler \u0026amp; Freezer Glass Door Sea\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/gasket-retainer-for-anthony-gaskets-previous\"\u003eAnthony Gasket Retainer \/ Cover Strip – OEM for Anthony Door Gaskets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hinge-pin-assembly\"\u003eAnthony Hinge Pin with Leads Door Heater \/ Anti-Sweat Power Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hold-open-arm\"\u003eAnthony Hold Open Arm – OEM Top Mount Frame \u0026amp; Door (Post-2003 Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"WebPage\", \"@id\": \"https:\/\/partsdirectonline.com\/collections\/commercial-cooking-equipment-parts#webpage\", \"name\": \"Related Commercial Equipment Knowledge\", \"url\": \"https:\/\/partsdirectonline.com\/collections\/commercial-cooking-equipment-parts\", \"about\": [{\"@type\": \"Thing\", \"name\": \"Commercial Equipment Parts \u0026 Service Academy\"}, {\"@type\": \"Thing\", \"name\": \"2-5\/8 Inch x 1 Inch Door Frame Heater Receptacle \\u2013 6 Wire Anti-Sweat OEM\"}, {\"@type\": \"Thing\", \"name\": \"American Panel Fan Delay Control \\u2013 OEM Walk-In Cooler \u0026 Freezer Fan Control\"}, {\"@type\": \"Thing\", \"name\": \"American Panel Heated Pressure Relief Port \\u2013 OEM Walk-In Cooler \u0026 Freezer Vent\"}, {\"@type\": \"Thing\", \"name\": \"American Panel Magnetic Dart-Mount Door Gasket\"}, {\"@type\": \"Thing\", \"name\": \"American Panel Pull Handle \\u2013 12-7\/8 Inch Flush Deadbolt Locking Handle, Brushed Chrome OEM\"}, {\"@type\": \"Thing\", \"name\": \"American Panel Snap-In Magnetic Gasket OEM Cooler \u0026 Freezer Door Seal\"}, {\"@type\": \"Thing\", \"name\": \"Anets P8900-47 Thermocouple\"}, {\"@type\": \"Thing\", \"name\": \"Anthony \/ Hussmann Torque Rod 29 Inch Hex | OEM Replacement\"}, {\"@type\": \"Thing\", \"name\": \"Anthony Dart Mount Narrow Gasket \\u2013 OEM Cooler \u0026 Freezer Glass Door Sea\"}, {\"@type\": \"Thing\", \"name\": \"Anthony Gasket Retainer \/ Cover Strip \\u2013 OEM for Anthony Door Gaskets\"}, {\"@type\": \"Thing\", \"name\": \"Anthony Hinge Pin with Leads Door Heater \/ Anti-Sweat Power Assembly\"}]}]}\u003c\/script\u003e\n\n\u003c!-- PDO_REVENUE_ENGINE_V1 --\u003e\n\u003csection class=\"pdo-revenue-path\" aria-label=\"Commercial parts buying help\"\u003e\n  \u003ch2\u003eFind the Correct Commercial Replacement Part\u003c\/h2\u003e\n  \u003cp\u003eUse this collection together with the related Academy guides below to confirm part identity before ordering. The fastest path is to compare the old part number, manufacturer markings, equipment model and serial plate, and physical configuration.\u003c\/p\u003e\n  \u003ch3\u003eRelated Buying and Identification Guides\u003c\/h3\u003e\n  \u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-cooking-equipment-academy\"\u003eCommercial Cooking Equipment Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-oven-academy\"\u003eCommercial Oven Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/commercial-fryer-academy\"\u003eCommercial Fryer Academy\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003ch3\u003eHigh-Intent Related Products\u003c\/h3\u003e\n  \u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eReversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/spring-loaded-pivot-hinge\"\u003eSpring-Loaded Pivot Hinge – Reversible Left \u0026amp; Right\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/shelf-pilaster-shelf-standard\"\u003eShelf Pilaster \/ Shelf Standard – Aluminum or Stainless Steel (48 Inch or 72 Inch)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eStainless Steel Drawer Roller – 1-1\/16 Inch Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides\"\u003eStainless Steel Drawer Slides – 200 lb Capacity, Sold in Pairs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbo-air-thermostat-temperature-control\"\u003eTurbo Air Thermostat Temperature Control — 28-1\/4 Inch Capillary Tube | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbo-air-thermostat-temperature-control-28-1-4-capillary-tube-plain-end\"\u003eTurbo Air Thermostat – Temperature Control | 28-1\/4 Inch Capillary Tube, Plain End\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hoshizaki-sp-5677-thermostat\"\u003eHoshizaki SP-5677 Thermostat with Bulb Holder – Ice Machine Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-refrigerator-hinge-double-adjustable\"\u003eEdgemount Refrigerator Hinge – Double Adjustable, Chrome Finish\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/manitowac-ice-machine-harvest-float-switch\"\u003eManitowac Ice Machine Harvest Float Switch – OEM Ice Level \u0026amp; Harvest Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n  \u003ch3\u003eBefore You Order\u003c\/h3\u003e\n  \u003cul\u003e\n\u003cli\u003eMatch the installed part number, equipment data plate, dimensions, voltage or gas markings, and physical mounting before ordering.\u003c\/li\u003e\n\u003cli\u003eUse OEM, MPN, SKU, and cross-reference numbers in site search when available.\u003c\/li\u003e\n\u003cli\u003eFor gas, high-voltage, refrigerant, or safety-control repairs, confirm diagnosis with manufacturer documentation or a qualified commercial equipment technician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","products":[{"product_id":"american-panel-snap-in-magnetic-door-gasket","title":"American Panel Snap-In Magnetic Gasket OEM Cooler \u0026 Freezer Door Seal","description":"\u003cp data-start=\"280\" data-end=\"627\"\u003eThe \u003cstrong data-start=\"284\" data-end=\"326\"\u003eAmerican Panel Snap-In Magnetic Gasket\u003c\/strong\u003e is a \u003cstrong data-start=\"332\" data-end=\"364\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed for American Panel walk-in cooler and freezer doors. This gasket features a \u003cstrong data-start=\"450\" data-end=\"468\"\u003esnap-in design\u003c\/strong\u003e for easy installation and a \u003cstrong data-start=\"497\" data-end=\"514\"\u003emagnetic seal\u003c\/strong\u003e to ensure doors close tightly, helping maintain safe food storage temperatures and maximize energy efficiency.\u003c\/p\u003e\u003cp data-start=\"629\" data-end=\"908\"\u003eAvailable in \u003cstrong data-start=\"642\" data-end=\"672\"\u003e3-sided or 4-sided options\u003c\/strong\u003e, this gasket provides a secure fit for a wide range of American Panel applications. Replacing worn or damaged gaskets promptly helps reduce energy costs, prevent food spoilage, and keep refrigeration systems performing at their best.\u003c\/p\u003e\u003ch3\u003e\n\u003cspan style=\"color: #000000;\"\u003eCUSTOM SIZES IN STOCK.\u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cem\u003e\u003cspan style=\"color: #000000;\"\u003eUSE PART NUMBER: PD-113\u003c\/span\u003e\u003c\/em\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/partsdirectonline.com\/pages\/custom-gasket-quote\"\u003e\u003cstrong\u003eCLICK HERE TO RECEIVE QUOTE.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\u003cp data-start=\"910\" data-end=\"938\"\u003e✅ \u003cstrong data-start=\"912\" data-end=\"936\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"939\" data-end=\"1360\"\u003e\n\u003cli data-start=\"939\" data-end=\"989\"\u003e\u003cp data-start=\"941\" data-end=\"989\"\u003eGenuine \u003cstrong data-start=\"949\" data-end=\"987\"\u003eAmerican Panel OEM magnetic gasket\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"990\" data-end=\"1041\"\u003e\u003cp data-start=\"992\" data-end=\"1041\"\u003e\u003cstrong data-start=\"992\" data-end=\"1009\"\u003eSnap-in style\u003c\/strong\u003e for fast, simple installation\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1042\" data-end=\"1096\"\u003e\u003cp data-start=\"1044\" data-end=\"1096\"\u003eAvailable in \u003cstrong data-start=\"1057\" data-end=\"1094\"\u003e3-sided or 4-sided configurations\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1097\" data-end=\"1164\"\u003e\u003cp data-start=\"1099\" data-end=\"1164\"\u003eMaintains tight seal to prevent cold air loss and frost buildup\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1165\" data-end=\"1235\"\u003e\u003cp data-start=\"1167\" data-end=\"1235\"\u003eHelps reduce energy waste and maintain proper holding temperatures\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1236\" data-end=\"1302\"\u003e\u003cp data-start=\"1238\" data-end=\"1302\"\u003eDesigned for \u003cstrong data-start=\"1251\" data-end=\"1300\"\u003eAmerican Panel walk-in cooler \u0026amp; freezer doors\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1303\" data-end=\"1360\"\u003e\u003cp data-start=\"1305\" data-end=\"1360\"\u003eDurable OEM construction for long-lasting performance\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-start=\"1362\" data-end=\"1619\"\u003e\u003cstrong data-start=\"1362\" data-end=\"1394\"\u003eWhy Replace the Door Gasket?\u003c\/strong\u003e\u003cbr data-start=\"1394\" data-end=\"1397\"\u003eA damaged gasket allows air leaks, leading to higher energy bills and unsafe food storage. Installing a \u003cstrong data-start=\"1501\" data-end=\"1523\"\u003egenuine OEM gasket\u003c\/strong\u003e ensures maximum efficiency, compliance with food safety standards, and long-term reliability.\u003c\/p\u003e\u003chr data-start=\"1621\" data-end=\"1624\"\u003e\u003ch2 data-start=\"1626\" data-end=\"1648\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1649\" data-end=\"1857\"\u003e\n\u003cli data-start=\"1649\" data-end=\"1678\"\u003e\u003cp data-start=\"1651\" data-end=\"1678\"\u003e\u003cstrong data-start=\"1651\" data-end=\"1661\"\u003eBrand:\u003c\/strong\u003e American Panel\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1679\" data-end=\"1726\"\u003e\u003cp data-start=\"1681\" data-end=\"1726\"\u003e\u003cstrong data-start=\"1681\" data-end=\"1695\"\u003ePart Type:\u003c\/strong\u003e Snap-In Magnetic Door Gasket\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1727\" data-end=\"1762\"\u003e\u003cp data-start=\"1729\" data-end=\"1762\"\u003e\u003cstrong data-start=\"1729\" data-end=\"1741\"\u003eOptions:\u003c\/strong\u003e 3-Sided or 4-Sided\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1763\" data-end=\"1814\"\u003e\u003cp data-start=\"1765\" data-end=\"1814\"\u003e\u003cstrong data-start=\"1765\" data-end=\"1781\"\u003eApplication:\u003c\/strong\u003e Walk-in cooler \u0026amp; freezer doors\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1815\" data-end=\"1857\"\u003e\u003cp data-start=\"1817\" data-end=\"1857\"\u003e\u003cstrong data-start=\"1817\" data-end=\"1834\"\u003eManufacturer:\u003c\/strong\u003e American Panel (OEM)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1859\" data-end=\"1862\"\u003e\u003ch2 data-start=\"1864\" data-end=\"1916\"\u003e🔹 FAQ – American Panel Snap-In Magnetic Gasket\u003c\/h2\u003e\u003cp data-start=\"1918\" data-end=\"2003\"\u003e\u003cstrong data-start=\"1918\" data-end=\"1953\"\u003eQ: What type of gasket is this?\u003c\/strong\u003e\u003cbr data-start=\"1953\" data-end=\"1956\"\u003eA: It is a \u003cstrong data-start=\"1967\" data-end=\"2000\"\u003esnap-in style magnetic gasket\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2005\" data-end=\"2103\"\u003e\u003cstrong data-start=\"2005\" data-end=\"2056\"\u003eQ: Is it available in different configurations?\u003c\/strong\u003e\u003cbr data-start=\"2056\" data-end=\"2059\"\u003eA: Yes, in \u003cstrong data-start=\"2070\" data-end=\"2092\"\u003e3-sided or 4-sided\u003c\/strong\u003e options.\u003c\/p\u003e\u003cp data-start=\"2105\" data-end=\"2216\"\u003e\u003cstrong data-start=\"2105\" data-end=\"2143\"\u003eQ: Why should I replace my gasket?\u003c\/strong\u003e\u003cbr data-start=\"2143\" data-end=\"2146\"\u003eA: To prevent \u003cstrong data-start=\"2160\" data-end=\"2213\"\u003eair leaks, food spoilage, and higher energy costs\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2218\" data-end=\"2316\"\u003e\u003cstrong data-start=\"2218\" data-end=\"2257\"\u003eQ: Is this an OEM replacement part?\u003c\/strong\u003e\u003cbr data-start=\"2257\" data-end=\"2260\"\u003eA: Yes, it is a \u003cstrong data-start=\"2276\" data-end=\"2313\"\u003egenuine American Panel OEM gasket\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eNeed replacement door seals? View all compatible options in our \u003ca href=\"\/collections\/gaskets\"\u003ecommercial refrigerator door gaskets collection\u003c\/a\u003e.\u003c\/p\u003e\u003csection class=\"pd-oem-reference\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 9A-1150.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-722-336\"\u003eSearch OEM \/ MPN PD-722-336\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-722-340\"\u003eSearch OEM \/ MPN PD-722-340\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-722-337\"\u003eSearch OEM \/ MPN PD-722-337\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"32\" x 79-3\/4\"","offer_id":42710439264479,"sku":"PD-722-336","price":98.64,"currency_code":"USD","in_stock":true},{"title":"32-1\/4\" x 76\"","offer_id":42710439362783,"sku":"PD-722-340","price":98.99,"currency_code":"USD","in_stock":true},{"title":"35-3\/4\" x 79-3\/4\"","offer_id":42710439297247,"sku":"PD-722-337","price":106.94,"currency_code":"USD","in_stock":true},{"title":"38\" x 76-1\/2\"","offer_id":42710439330015,"sku":"PD-722-338","price":99.89,"currency_code":"USD","in_stock":true},{"title":"36-1\/2\" x 76-1\/4\"","offer_id":42710439395551,"sku":"PD-722-341","price":98.99,"currency_code":"USD","in_stock":true},{"title":"38-3\/8\" x 80\"","offer_id":42710439428319,"sku":"PD-722-342","price":106.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/american-panel-snap-in-magnetic-gasket-oem-cooler-freezer-door-seal-7206388.jpg?v=1765852810"},{"product_id":"pull-handle-7-edgemount","title":"Beverage-Air Pull Handle – OEM Black 7 Inch Replacement (6 Inch Hole Centers","description":"\u003cp data-start=\"240\" data-end=\"591\"\u003ehe \u003cstrong data-start=\"244\" data-end=\"272\"\u003eBeverage-Air Pull Handle\u003c\/strong\u003e is a \u003cstrong data-start=\"278\" data-end=\"310\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed for reliable performance and a professional finish on your commercial refrigeration equipment. This \u003cstrong data-start=\"420\" data-end=\"443\"\u003e7-inch black handle\u003c\/strong\u003e is built to withstand heavy daily use in restaurants, bars, and kitchens, ensuring your Beverage-Air cooler or prep table doors operate smoothly.\u003c\/p\u003e\u003cp data-start=\"593\" data-end=\"869\"\u003eEngineered with \u003cstrong data-start=\"609\" data-end=\"632\"\u003e6-inch hole centers\u003c\/strong\u003e and pre-drilled for \u003cstrong data-start=\"653\" data-end=\"679\"\u003e#10 countersunk screws\u003c\/strong\u003e, this handle allows quick installation and a precise fit. Perfect for replacing worn, cracked, or broken handles, it restores both functionality and appearance to your Beverage-Air units.\u003c\/p\u003e\u003cp data-start=\"871\" data-end=\"899\"\u003e✅ \u003cstrong data-start=\"873\" data-end=\"897\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"900\" data-end=\"1198\"\u003e\n\u003cli data-start=\"900\" data-end=\"944\"\u003e\u003cp data-start=\"902\" data-end=\"944\"\u003eOEM Beverage-Air replacement pull handle\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"945\" data-end=\"998\"\u003e\u003cp data-start=\"947\" data-end=\"998\"\u003eDurable black finish for long-lasting performance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"999\" data-end=\"1047\"\u003e\u003cp data-start=\"1001\" data-end=\"1047\"\u003e\u003cstrong data-start=\"1001\" data-end=\"1020\"\u003e7\" total length\u003c\/strong\u003e with \u003cstrong data-start=\"1026\" data-end=\"1045\"\u003e6\" hole centers\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1048\" data-end=\"1090\"\u003e\u003cp data-start=\"1050\" data-end=\"1090\"\u003ePre-drilled for #10 countersunk screws\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1091\" data-end=\"1140\"\u003e\u003cp data-start=\"1093\" data-end=\"1140\"\u003eEasy installation – no modifications required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1141\" data-end=\"1198\"\u003e\u003cp data-start=\"1143\" data-end=\"1198\"\u003eEnsures smooth door operation and a professional look\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1200\" data-end=\"1203\"\u003e\u003ch2 data-start=\"1205\" data-end=\"1227\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1228\" data-end=\"1453\"\u003e\n\u003cli data-start=\"1228\" data-end=\"1255\"\u003e\u003cp data-start=\"1230\" data-end=\"1255\"\u003e\u003cstrong data-start=\"1230\" data-end=\"1240\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1256\" data-end=\"1286\"\u003e\u003cp data-start=\"1258\" data-end=\"1286\"\u003e\u003cstrong data-start=\"1258\" data-end=\"1272\"\u003ePart Type:\u003c\/strong\u003e Pull Handle\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1287\" data-end=\"1307\"\u003e\u003cp data-start=\"1289\" data-end=\"1307\"\u003e\u003cstrong data-start=\"1289\" data-end=\"1299\"\u003eColor:\u003c\/strong\u003e Black\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1308\" data-end=\"1326\"\u003e\u003cp data-start=\"1310\" data-end=\"1326\"\u003e\u003cstrong data-start=\"1310\" data-end=\"1321\"\u003eLength:\u003c\/strong\u003e 7\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1327\" data-end=\"1351\"\u003e\u003cp data-start=\"1329\" data-end=\"1351\"\u003e\u003cstrong data-start=\"1329\" data-end=\"1346\"\u003eHole Centers:\u003c\/strong\u003e 6\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1352\" data-end=\"1408\"\u003e\u003cp data-start=\"1354\" data-end=\"1408\"\u003e\u003cstrong data-start=\"1354\" data-end=\"1367\"\u003eMounting:\u003c\/strong\u003e Pre-drilled for #10 countersunk screws\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1409\" data-end=\"1453\"\u003e\u003cp data-start=\"1411\" data-end=\"1453\"\u003e\u003cstrong data-start=\"1411\" data-end=\"1419\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine Beverage-Air Part\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1455\" data-end=\"1458\"\u003e\u003ch2 data-start=\"1460\" data-end=\"1485\"\u003e🔹 Compatible Models\u003c\/h2\u003e\u003cul data-start=\"1486\" data-end=\"1725\"\u003e\n\u003cli data-start=\"1486\" data-end=\"1495\"\u003e\u003cp data-start=\"1488\" data-end=\"1495\"\u003eDD581\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1496\" data-end=\"1504\"\u003e\u003cp data-start=\"1498\" data-end=\"1504\"\u003ePT93\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1505\" data-end=\"1537\"\u003e\u003cp data-start=\"1507\" data-end=\"1537\"\u003eSP27, SP2712M, SP278, SP278C\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1727\" data-end=\"1730\"\u003e\u003ch2 data-start=\"1732\" data-end=\"1770\"\u003e🔹 FAQ – Beverage-Air Pull Handle\u003c\/h2\u003e\u003cp data-start=\"1772\" data-end=\"1895\"\u003e\u003cstrong data-start=\"1772\" data-end=\"1799\"\u003eQ: Is this an OEM part?\u003c\/strong\u003e\u003cbr data-start=\"1799\" data-end=\"1802\"\u003eA: Yes, this is a \u003cstrong data-start=\"1820\" data-end=\"1860\"\u003egenuine Beverage-Air OEM pull handle\u003c\/strong\u003e for reliable fit and durability.\u003c\/p\u003e\u003cp data-start=\"1897\" data-end=\"2023\"\u003e\u003cstrong data-start=\"1897\" data-end=\"1943\"\u003eQ: What are the dimensions of this handle?\u003c\/strong\u003e\u003cbr data-start=\"1943\" data-end=\"1946\"\u003eA: The handle measures \u003cstrong data-start=\"1969\" data-end=\"1991\"\u003e7 inches in length\u003c\/strong\u003e with \u003cstrong data-start=\"1997\" data-end=\"2020\"\u003e6-inch hole centers\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2025\" data-end=\"2153\"\u003e\u003cstrong data-start=\"2025\" data-end=\"2058\"\u003eQ: Which screws are required?\u003c\/strong\u003e\u003cbr data-start=\"2058\" data-end=\"2061\"\u003eA: It is \u003cstrong data-start=\"2070\" data-end=\"2112\"\u003epre-drilled for #10 countersunk screws\u003c\/strong\u003e, making installation quick and simple.\u003c\/p\u003e\u003cp data-start=\"2155\" data-end=\"2340\"\u003e\u003cstrong data-start=\"2155\" data-end=\"2210\"\u003eQ: What Beverage-Air units is this compatible with?\u003c\/strong\u003e\u003cbr data-start=\"2210\" data-end=\"2213\"\u003eA: Fits a wide range of prep tables, coolers, and bar units including \u003cstrong data-start=\"2283\" data-end=\"2337\"\u003eDD581, PT93, SP27, SP60, and many SP-series models\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2342\" data-end=\"2543\"\u003e\u003cstrong data-start=\"2342\" data-end=\"2378\"\u003eQ: Why replace a damaged handle?\u003c\/strong\u003e\u003cbr data-start=\"2378\" data-end=\"2381\"\u003eA: A broken handle makes doors harder to operate and can increase strain on hinges and gaskets. Replacing ensures proper performance and extends equipment life.\u003c\/p\u003e\u003csection class=\"pd-oem-reference\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 401-506C.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-005\"\u003eSearch OEM \/ MPN PD-754-005\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27-005\"\u003eSearch OEM \/ MPN 27-005\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27005\"\u003eSearch OEM \/ MPN 27005\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":42500206395615,"sku":"401-506C","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-pull-handle-oem-black-7-replacement-6-hole-centers-4290500.jpg?v=1765853167"},{"product_id":"shelf-clip","title":"Beverage-Air Shelf Clip – OEM Replacement for Undercounters \u0026 Reach-In Units","description":"\u003cp data-start=\"231\" data-end=\"543\"\u003eThe \u003cstrong data-start=\"235\" data-end=\"262\"\u003eBeverage-Air Shelf Clip\u003c\/strong\u003e is a genuine OEM replacement part designed to securely hold shelving in place inside your commercial refrigeration equipment. Built for durability and reliability, this clip ensures your shelves stay stable, even under heavy use in restaurants, bars, and foodservice operations.\u003c\/p\u003e\u003cp data-start=\"545\" data-end=\"816\"\u003eCompatible with a wide range of \u003cstrong data-start=\"577\" data-end=\"631\"\u003eBeverage-Air undercounters, reach-ins, and coolers\u003c\/strong\u003e, this shelf clip helps maintain proper interior organization while maximizing storage space. Replacing worn or broken clips is essential to keeping your shelving safe and functional.\u003c\/p\u003e\u003cp data-start=\"818\" data-end=\"846\"\u003e✅ \u003cstrong data-start=\"820\" data-end=\"844\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"847\" data-end=\"1084\"\u003e\n\u003cli data-start=\"847\" data-end=\"890\"\u003e\u003cp data-start=\"849\" data-end=\"890\"\u003eGenuine \u003cstrong data-start=\"857\" data-end=\"888\"\u003eBeverage-Air OEM shelf clip\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"891\" data-end=\"949\"\u003e\u003cp data-start=\"893\" data-end=\"949\"\u003eDesigned for use with undercounters and reach-in units\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"950\" data-end=\"998\"\u003e\u003cp data-start=\"952\" data-end=\"998\"\u003eProvides a secure fit for shelving stability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"999\" data-end=\"1044\"\u003e\u003cp data-start=\"1001\" data-end=\"1044\"\u003eDurable construction for long-lasting use\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1045\" data-end=\"1084\"\u003e\u003cp data-start=\"1047\" data-end=\"1084\"\u003eEasy to install – no tools required\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1086\" data-end=\"1089\"\u003e\u003ch2 data-start=\"1091\" data-end=\"1113\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1114\" data-end=\"1313\"\u003e\n\u003cli data-start=\"1114\" data-end=\"1141\"\u003e\u003cp data-start=\"1116\" data-end=\"1141\"\u003e\u003cstrong data-start=\"1116\" data-end=\"1126\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1142\" data-end=\"1171\"\u003e\u003cp data-start=\"1144\" data-end=\"1171\"\u003e\u003cstrong data-start=\"1144\" data-end=\"1158\"\u003ePart Type:\u003c\/strong\u003e Shelf Clip\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1172\" data-end=\"1210\"\u003e\u003cp data-start=\"1174\" data-end=\"1210\"\u003e\u003cstrong data-start=\"1174\" data-end=\"1182\"\u003eUse:\u003c\/strong\u003e Supports interior shelves\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1211\" data-end=\"1265\"\u003e\u003cp data-start=\"1213\" data-end=\"1265\"\u003e\u003cstrong data-start=\"1213\" data-end=\"1230\"\u003eInstallation:\u003c\/strong\u003e Snap-in design, easy replacement\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1266\" data-end=\"1313\"\u003e\u003cp data-start=\"1268\" data-end=\"1313\"\u003e\u003cstrong data-start=\"1268\" data-end=\"1276\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine OEM replacement part\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1315\" data-end=\"1318\"\u003e\u003ch2 data-start=\"1320\" data-end=\"1345\"\u003e🔹 Compatible Models\u003c\/h2\u003e\u003cul data-start=\"1346\" data-end=\"1626\"\u003e\n\u003cli data-start=\"1346\" data-end=\"1360\"\u003e\u003cp data-start=\"1348\" data-end=\"1360\"\u003eBB48, BB72\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1361\" data-end=\"1376\"\u003e\u003cp data-start=\"1363\" data-end=\"1376\"\u003eBM23, BM23B\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1377\" data-end=\"1385\"\u003e\u003cp data-start=\"1379\" data-end=\"1385\"\u003eBZ13\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1386\" data-end=\"1418\"\u003e\u003cp data-start=\"1388\" data-end=\"1418\"\u003eCFG12, CFG48, CFG485, CFG745\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1419\" data-end=\"1436\"\u003e\u003cp data-start=\"1421\" data-end=\"1436\"\u003eCRG48, CRG741\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1437\" data-end=\"1452\"\u003e\u003cp data-start=\"1439\" data-end=\"1452\"\u003eDD78, DD78E\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1453\" data-end=\"1461\"\u003e\u003cp data-start=\"1455\" data-end=\"1461\"\u003eDW79\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1462\" data-end=\"1501\"\u003e\u003cp data-start=\"1464\" data-end=\"1501\"\u003eEF241AHS, EF241AS, EF481AS, EF745AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1502\" data-end=\"1560\"\u003e\u003cp data-start=\"1504\" data-end=\"1560\"\u003eER24, ER241, ER241AHS, ER241AS, ER48, ER481AS, ER741AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1561\" data-end=\"1580\"\u003e\u003cp data-start=\"1563\" data-end=\"1580\"\u003eHBR491G, HBR721\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1581\" data-end=\"1605\"\u003e\u003cp data-start=\"1583\" data-end=\"1605\"\u003eHR11HS, HR11S, HR31S\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1606\" data-end=\"1626\"\u003e\u003cp data-start=\"1608\" data-end=\"1626\"\u003eKF12, KF24, KF36\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1628\" data-end=\"1631\"\u003e\u003ch2 data-start=\"1633\" data-end=\"1670\"\u003e🔹 FAQ – Beverage-Air Shelf Clip\u003c\/h2\u003e\u003cp data-start=\"1672\" data-end=\"1802\"\u003e\u003cstrong data-start=\"1672\" data-end=\"1699\"\u003eQ: Is this an OEM part?\u003c\/strong\u003e\u003cbr data-start=\"1699\" data-end=\"1702\"\u003eA: Yes, this is a \u003cstrong data-start=\"1720\" data-end=\"1759\"\u003egenuine OEM Beverage-Air shelf clip\u003c\/strong\u003e, ensuring compatibility and reliability.\u003c\/p\u003e\u003cp data-start=\"1804\" data-end=\"1952\"\u003e\u003cstrong data-start=\"1804\" data-end=\"1835\"\u003eQ: Where is this clip used?\u003c\/strong\u003e\u003cbr data-start=\"1835\" data-end=\"1838\"\u003eA: It is \u003cstrong data-start=\"1847\" data-end=\"1919\"\u003ecommonly found on Beverage-Air undercounters, reach-ins, and coolers\u003c\/strong\u003e, holding the shelves in place.\u003c\/p\u003e\u003cp data-start=\"1954\" data-end=\"2123\"\u003e\u003cstrong data-start=\"1954\" data-end=\"2004\"\u003eQ: How do I know if my clip needs replacement?\u003c\/strong\u003e\u003cbr data-start=\"2004\" data-end=\"2007\"\u003eA: If your shelf is loose, tilting, or won’t stay level, the clip is likely worn or broken and should be replaced.\u003c\/p\u003e\u003cp data-start=\"2125\" data-end=\"2256\"\u003e\u003cstrong data-start=\"2125\" data-end=\"2153\"\u003eQ: Is installation easy?\u003c\/strong\u003e\u003cbr data-start=\"2153\" data-end=\"2156\"\u003eA: Yes, this shelf clip is \u003cstrong data-start=\"2183\" data-end=\"2216\"\u003eeasy to snap in without tools\u003c\/strong\u003e, making replacement quick and simple.\u003c\/p\u003e\u003cp data-start=\"2258\" data-end=\"2391\"\u003e\u003cstrong data-start=\"2258\" data-end=\"2290\"\u003eQ: Which models does it fit?\u003c\/strong\u003e\u003cbr data-start=\"2290\" data-end=\"2293\"\u003eA: Fits multiple models, including \u003cstrong data-start=\"2328\" data-end=\"2388\"\u003eBB48, BM23, CFG48, ER24, EF481AS, HBR721, KF36, and more\u003c\/strong\u003e.\u003c\/p\u003e\u003csection class=\"pd-oem-reference\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 403-168A.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-406\"\u003eSearch OEM \/ MPN PD-754-406\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27-406\"\u003eSearch OEM \/ MPN 27-406\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27406\"\u003eSearch OEM \/ MPN 27406\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":42500206493919,"sku":"403-168A","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-shelf-clip-oem-replacement-for-undercounters-reach-in-units-8840880.jpg?v=1765852811"},{"product_id":"kason-lid-cover-bracket-kit","title":"Kason Lid Cover Bracket Kit – Bain Marie Hold-Open Brackets (Stainless)","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Kason\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 180800A100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 180800A100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-780-789\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eKason OEM 180800A100 is a lid cover bracket kit identified as a hinge assembly for commercial refrigeration equipment. The kit is associated with a Bain Marie hold-open bracket arrangement and is used where dependable lid or cover positioning is important to daily equipment operation. As a mechanical door-hardware component, the bracket assembly helps maintain the intended relationship between the lid cover, its mounting area, and the hold-open hardware. A worn, bent, loose, or mismatched bracket can contribute to poor alignment, difficult movement, or unreliable cover support. For commercial equipment service, correct hardware identification matters because bracket shape, mounting-hole placement, orientation, and pivot arrangement can vary between assemblies that appear similar. Ordering Kason part number 180800A100 provides a clear manufacturer part-number reference for comparison with the removed component. Review the original bracket kit carefully before purchase, including its mounting layout and the condition of related hardware. Replacing damaged lid cover hardware can help restore orderly cover movement and support a properly aligned assembly.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Kason lid cover bracket kit serves as hinge-related mechanical hardware within a commercial refrigeration equipment cover or door assembly. Its purpose is to provide the bracket support and mounting relationship required by the intended lid cover hold-open arrangement. Properly matched hardware helps the cover move through its intended range and remain positioned as designed by the equipment manufacturer. Because this is a mechanical component, its service value depends on correct identification and physical comparison rather than electrical characteristics. The Kason OEM number 180800A100 should be matched to the original part number whenever possible. Inspect the removed hardware for wear, distortion, loose mounting points, damaged pivot areas, or changes in alignment that could affect lid cover movement.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eKason OEM part number 180800A100 gives technicians and equipment owners a reliable manufacturer reference when replacing this lid cover bracket kit. Matching the original Kason number helps distinguish this hinge-related bracket assembly from similar-looking hardware with different mounting layouts, orientations, or hold-open arrangements. Using the verified manufacturer part number also supports a more confident comparison of the removed component before ordering. Confirm the part number, mounting pattern, and physical configuration of the original hardware to reduce the risk of ordering the wrong bracket kit.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eThe lid cover bracket kit works as part of a mechanical hinge and support arrangement. Once installed in its intended assembly, the bracket hardware establishes the mounting position and geometry needed for the lid cover to move in a controlled manner. The hold-open arrangement is intended to support the cover position during normal access and use, while the mounting points keep the hardware aligned with the associated cover or door assembly. Mechanical wear can affect this relationship over time. Loosened fasteners, elongated mounting holes, bent bracket surfaces, worn pivot points, or a shifted cover can place the hardware out of alignment. When the bracket kit no longer maintains its intended position, the cover may feel loose, bind during movement, sit unevenly, or fail to remain where it should. Comparing Kason 180800A100 with the removed component is the most direct way to confirm the correct replacement hardware.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the bracket kit, compare the removed hardware with Kason 180800A100 and inspect the mounting surfaces, fasteners, pivot areas, and cover alignment. A replacement bracket may not correct operation if the related cover, latch, gasket, or mounting area is bent, worn, or loose.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA lid cover that may not remain in its intended open position.\u003c\/li\u003e\n  \u003cli\u003eCover movement that feels loose, uneven, or unstable.\u003c\/li\u003e\n  \u003cli\u003eA lid or cover that may bind during opening or closing.\u003c\/li\u003e\n  \u003cli\u003eVisible bending, cracking, corrosion, or mechanical damage on the bracket hardware.\u003c\/li\u003e\n  \u003cli\u003eLoose fasteners or mounting points that should be inspected.\u003c\/li\u003e\n  \u003cli\u003eMounting holes that appear worn or elongated and may affect bracket alignment.\u003c\/li\u003e\n  \u003cli\u003eA cover that sits unevenly relative to the surrounding assembly.\u003c\/li\u003e\n  \u003cli\u003eUnusual movement at the hinge or bracket area when the cover is operated.\u003c\/li\u003e\n  \u003cli\u003eA hold-open arrangement that may no longer provide consistent support.\u003c\/li\u003e\n  \u003cli\u003eRepeated need to reposition the cover manually, which can indicate wear in the related hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eKason 180800A100 is identified as a lid cover bracket kit hinge for commercial refrigeration equipment. It may be relevant to restaurant service operations, foodservice maintenance teams, commercial kitchen repair providers, and technicians responsible for maintaining mechanical cover and door hardware. The verified product identity supports use as a replacement component where the original Kason bracket kit and mounting arrangement match. Because specific equipment models are not established here, the part should be selected by the manufacturer part number and a close comparison with the removed component rather than by assumed application.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Kason OEM part number 180800A100 to the original component whenever possible.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed bracket kit with the product image and product title.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the part is a lid cover bracket kit hinge rather than another style of door or cover hardware.\u003c\/li\u003e\n  \u003cli\u003eReview the bracket shape, orientation, and mounting-hole arrangement.\u003c\/li\u003e\n  \u003cli\u003eInspect the original component for the number and placement of mounting points.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment manufacturer, model, and serial number from the data plate.\u003c\/li\u003e\n  \u003cli\u003eCheck whether the related lid cover or door assembly is bent, worn, or out of alignment.\u003c\/li\u003e\n  \u003cli\u003eInspect hinge screws, pins, and other associated hardware for wear or damage.\u003c\/li\u003e\n  \u003cli\u003eReview the condition and position of the related gasket where applicable.\u003c\/li\u003e\n  \u003cli\u003eUse SKU PD-780-789 as an additional PartsDirectOnline ordering reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket where it is part of the same cover or door assembly, since a displaced or damaged gasket can affect alignment and closure.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check associated fasteners and pivot hardware for looseness, wear, corrosion, or damage that could affect bracket stability.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect the latch where applicable, because latch engagement can be affected when a cover or door assembly is misaligned.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Review related closing hardware where present to confirm that it is not placing unusual force on the lid cover or bracket area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Kason part number 180800A100?\u003c\/h3\u003e\n\u003cp\u003eKason 180800A100 is a lid cover bracket kit identified as a hinge assembly for commercial refrigeration equipment. It is associated with a Bain Marie hold-open bracket arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eIs Kason 180800A100 a genuine OEM part?\u003c\/h3\u003e\n\u003cp\u003eYes. Kason 180800A100 is a verified Kason OEM part number for this lid cover bracket kit hinge.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I compare before ordering this lid cover bracket kit?\u003c\/h3\u003e\n\u003cp\u003eCompare the Kason OEM number 180800A100, the removed bracket shape, orientation, mounting-hole layout, and related pivot hardware. Also confirm the equipment model and serial number from the data plate.\u003c\/p\u003e\n\n\u003ch3\u003eCan a damaged bracket affect lid cover operation?\u003c\/h3\u003e\n\u003cp\u003eYes. A bent, loose, worn, or misaligned bracket may contribute to uneven movement, binding, poor support, or difficulty keeping the lid cover in its intended position.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this bracket kit include model-specific fitment information?\u003c\/h3\u003e\n\u003cp\u003eSpecific equipment model fitment is not established here. Confirm the original Kason part number and compare the removed component with the bracket kit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat related parts should be inspected with the bracket kit?\u003c\/h3\u003e\n\u003cp\u003eInspect related hinge screws or pins, the lid cover or door mounting area, the gasket where applicable, and any latch or closer hardware connected to the same assembly.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Kason 180800A100 Lid Cover Bracket Kit Hinge\",\"description\":\"Kason OEM 180800A100 lid cover bracket kit hinge for commercial refrigeration equipment. Compare the original hardware, mounting layout, and related components before ordering.\",\"sku\":\"PD-780-789\",\"mpn\":\"180800A100\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Kason\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Kason\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"180800A100\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial refrigeration equipment\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Kason part number 180800A100?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Kason 180800A100 is a lid cover bracket kit identified as a hinge assembly for commercial refrigeration equipment. It is associated with a Bain Marie hold-open bracket arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Is Kason 180800A100 a genuine OEM part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Kason 180800A100 is a verified Kason OEM part number for this lid cover bracket kit hinge.\"}},{\"@type\":\"Question\",\"name\":\"What should I compare before ordering this lid cover bracket kit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the Kason OEM number 180800A100, the removed bracket shape, orientation, mounting-hole layout, and related pivot hardware. Also confirm the equipment model and serial number from the data plate.\"}},{\"@type\":\"Question\",\"name\":\"Can a damaged bracket affect lid cover operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A bent, loose, worn, or misaligned bracket may contribute to uneven movement, binding, poor support, or difficulty keeping the lid cover in its intended position.\"}},{\"@type\":\"Question\",\"name\":\"Does this bracket kit include model-specific fitment information?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Specific equipment model fitment is not established here. Confirm the original Kason part number and compare the removed component with the bracket kit before ordering.\"}},{\"@type\":\"Question\",\"name\":\"What related parts should be inspected with the bracket kit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect related hinge screws or pins, the lid cover or door mounting area, the gasket where applicable, and any latch or closer hardware connected to the same assembly.\"}}]}\u003c\/script\u003e","brand":"Kason","offers":[{"title":"Default Title","offer_id":42500207149279,"sku":"PD-780-789","price":80.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/kason-lid-cover-bracket-kit-1828813.jpg?v=1765853107"},{"product_id":"draw-slides-23-5-8","title":"Continental Drawer Slides – 2-3\/8 Inch Height Stainless Steel | 150 lb Load Rating | Sold in Pairs","description":"\u003cp data-start=\"666\" data-end=\"952\"\u003eUpgrade or replace your Continental refrigeration drawer hardware with these \u003cstrong data-start=\"743\" data-end=\"800\"\u003eOEM-style 2-3\/8\" height stainless steel drawer slides\u003c\/strong\u003e. Built for \u003cstrong data-start=\"812\" data-end=\"845\"\u003ecommercial kitchen durability\u003c\/strong\u003e, these slides provide \u003cstrong data-start=\"868\" data-end=\"904\"\u003esmooth, reliable drawer movement\u003c\/strong\u003e while supporting heavy loads up to \u003cstrong data-start=\"940\" data-end=\"951\"\u003e150 lbs\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"954\" data-end=\"1171\"\u003ePerfect for \u003cstrong data-start=\"966\" data-end=\"1027\"\u003eprep tables, undercounter units, and refrigerated drawers\u003c\/strong\u003e, these slides are \u003cstrong data-start=\"1046\" data-end=\"1063\"\u003esold in pairs\u003c\/strong\u003e and engineered to match original Continental specifications for a precise fit and long-lasting performance.\u003c\/p\u003e\u003ch3 data-start=\"2837\" data-end=\"2881\"\u003e🚚 \u003cstrong data-start=\"2844\" data-end=\"2879\"\u003eFast Shipping \u0026amp; Trusted Support\u003c\/strong\u003e\n\u003c\/h3\u003e\u003cp data-start=\"2882\" data-end=\"3111\"\u003eAll Continental replacement parts are \u003cstrong data-start=\"2920\" data-end=\"2950\"\u003ein stock and ready to ship\u003c\/strong\u003e. PartsDirectOnline provides \u003cstrong data-start=\"2979\" data-end=\"3007\"\u003efast nationwide shipping\u003c\/strong\u003e, secure packaging, and expert support to keep your commercial refrigeration equipment working like new.\u003c\/p\u003e\u003chr data-start=\"1173\" data-end=\"1176\"\u003e\u003ch3 data-start=\"1178\" data-end=\"1213\"\u003e✅ \u003cstrong data-start=\"1184\" data-end=\"1211\"\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\n\u003c\/h3\u003e\u003cul data-start=\"1214\" data-end=\"1692\"\u003e\n\u003cli data-start=\"1214\" data-end=\"1293\"\u003e\u003cp data-start=\"1216\" data-end=\"1293\"\u003eOEM-style replacement \u003cstrong data-start=\"1238\" data-end=\"1255\"\u003edrawer slides\u003c\/strong\u003e for Continental refrigeration units\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1294\" data-end=\"1374\"\u003e\u003cp data-start=\"1296\" data-end=\"1374\"\u003e\u003cstrong data-start=\"1296\" data-end=\"1313\"\u003e2-3\/8\" height\u003c\/strong\u003e design fits a wide range of refrigerated drawer assemblies\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1375\" data-end=\"1443\"\u003e\u003cp data-start=\"1377\" data-end=\"1443\"\u003eHeavy-duty \u003cstrong data-start=\"1388\" data-end=\"1414\"\u003estainless steel finish\u003c\/strong\u003e resists corrosion and wear\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1444\" data-end=\"1496\"\u003e\u003cp data-start=\"1446\" data-end=\"1496\"\u003eSupports up to \u003cstrong data-start=\"1461\" data-end=\"1485\"\u003e150 lb load capacity\u003c\/strong\u003e per pair\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1497\" data-end=\"1560\"\u003e\u003cp data-start=\"1499\" data-end=\"1560\"\u003eEnsures smooth, stable drawer movement under commercial use\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1561\" data-end=\"1616\"\u003e\u003cp data-start=\"1563\" data-end=\"1616\"\u003eSold in pairs for easy installation and maintenance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1617\" data-end=\"1692\"\u003e\u003cp data-start=\"1619\" data-end=\"1692\"\u003eIdeal for prep tables, undercounter refrigerators, and refrigerated bases\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1694\" data-end=\"1697\"\u003e\u003ch3 data-start=\"1699\" data-end=\"1741\"\u003e📌 \u003cstrong data-start=\"1706\" data-end=\"1739\"\u003eCompatible Use \u0026amp; Applications\u003c\/strong\u003e\n\u003c\/h3\u003e\u003cul data-start=\"1742\" data-end=\"2051\"\u003e\n\u003cli data-start=\"1742\" data-end=\"1768\"\u003e\u003cp data-start=\"1744\" data-end=\"1768\"\u003e\u003cstrong data-start=\"1744\" data-end=\"1754\"\u003eBrand:\u003c\/strong\u003e Continental\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1769\" data-end=\"1862\"\u003e\u003cp data-start=\"1771\" data-end=\"1862\"\u003e\u003cstrong data-start=\"1771\" data-end=\"1788\"\u003eApplications:\u003c\/strong\u003e Refrigerated drawers in prep tables, undercounter units, and chef bases\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1863\" data-end=\"1937\"\u003e\u003cp data-start=\"1865\" data-end=\"1937\"\u003e\u003cstrong data-start=\"1865\" data-end=\"1879\"\u003eOEM Style:\u003c\/strong\u003e Direct replacement for original drawer slide assemblies\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1938\" data-end=\"2051\"\u003e\u003cp data-start=\"1940\" data-end=\"2051\"\u003e\u003cstrong data-start=\"1940\" data-end=\"1948\"\u003eUse:\u003c\/strong\u003e Ideal for replacing worn or damaged slides to restore smooth operation and support heavy kitchen loads\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003csection class=\"pd-oem-reference\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 2-514.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pd-product-faq\"\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eHow do I confirm this part fits my equipment?\u003c\/h4\u003e\n\u003cp\u003eCompare your existing part number, equipment model, and dimensions against this listing before ordering. If available, use the OEM \/ part number reference: 2-514.\u003c\/p\u003e\n\u003ch4\u003eIs this intended as a replacement part?\u003c\/h4\u003e\n\u003cp\u003eYes. This listing is intended for buyers replacing a matching commercial refrigeration or foodservice equipment part. Verify compatibility before installation.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-718-244\"\u003eSearch OEM \/ MPN PD-718-244\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-718-253\"\u003eSearch OEM \/ MPN PD-718-253\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-718-201\"\u003eSearch OEM \/ MPN PD-718-201\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"13-3\/4\"","offer_id":43029671608543,"sku":"2-517","price":270.36,"currency_code":"USD","in_stock":true},{"title":"17-3\/4\"","offer_id":43029671641311,"sku":"2-518","price":250.12,"currency_code":"USD","in_stock":true},{"title":"23-5\/8\"","offer_id":42711261511903,"sku":"2-514","price":350.0,"currency_code":"USD","in_stock":true},{"title":"27-1\/2\"","offer_id":42711261544671,"sku":"2-510","price":299.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/continental-drawer-slides-2-38-height-stainless-steel-150-lb-load-rating-sold-in-pairs-7352560.jpg?v=1765852988"},{"product_id":"lid-cover-bracket-1","title":"Delfield Bain Marie Lid Cover Bracket","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Delfield\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 3234282\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 3234282\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-734-136\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eDelfield OEM 3234282 is a door gasket used to help maintain the seal around a commercial refrigeration equipment door opening. A sound gasket gives the door edge a consistent contact surface, helping limit cabinet air leakage when the door is closed. That seal matters in foodservice equipment because a worn, split, flattened, or poorly seated gasket can allow warm air and moisture to enter the cabinet area. This Delfield gasket is identified by manufacturer part number 3234282. It is a practical service item for technicians and maintenance teams addressing door-seal condition on Delfield equipment. The gasket works with the door assembly rather than as an isolated component: door alignment, hinge condition, latch engagement, and the condition of the gasket channel can all affect the final seal. Replacing a damaged gasket may help restore proper door-edge contact when the correct part is selected and the surrounding hardware is in suitable condition. Before ordering, use the OEM number as the primary identification point and compare the original component carefully. Checking the gasket profile, corner arrangement, mounting style, and door application helps avoid delays caused by ordering a part that does not match the equipment in service.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis gasket forms the sealing surface between the door and cabinet opening on applicable Delfield commercial refrigeration equipment. When the door closes, the gasket compresses around the perimeter to reduce the path for air movement through the door edge. Consistent contact around that perimeter supports normal cabinet operation and helps limit moisture entry near the opening. Because the gasket depends on correct door position, it should be considered alongside the hinge, latch, door frame, and retaining area. A gasket can be in good condition yet fail to make even contact if the door is misaligned or the mounting area is damaged. Delfield OEM 3234282 provides a manufacturer-identified gasket option when the original part number and physical configuration correspond to the component being replaced.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eChoosing a genuine Delfield OEM gasket identified as 3234282 provides a clear manufacturer part-number reference for the replacement process. Matching that number to the original component helps keep ordering focused on the correct identified part rather than relying only on a general gasket description. A careful comparison of the existing gasket and door arrangement remains important, particularly where door hardware condition or gasket mounting details may affect the seal.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA door gasket performs its job through continuous contact at the door perimeter. As the door closes, the gasket is pressed between the door and the cabinet-side contact area. This compression creates a barrier that helps reduce air exchange at the opening. Even contact is important: a gap, twisted section, hardened area, or damaged corner can leave part of the perimeter without a reliable seal. The gasket's effectiveness also depends on the surrounding door assembly. Hinges influence the door's position, the latch or closure hardware affects how securely it closes, and the gasket channel or retaining area holds the gasket in its intended location. If any of those related parts are worn, bent, loose, or obstructed, the door may not close evenly. Inspecting the complete door edge helps determine whether gasket condition is the only concern.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the gasket, inspect the full door perimeter with the door closed and compare the original component to OEM 3234282. Look for uneven door position, damaged retaining areas, debris at the contact surface, and hardware that prevents consistent closure. These checks can help identify conditions that may continue to affect the seal after a new gasket is installed.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCracks, splits, or separated sections in the gasket may indicate that the door seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eCorners that lift away from the door edge can indicate loss of proper perimeter contact.\u003c\/li\u003e\n  \u003cli\u003eA door that closes but leaves an uneven gap may point to a gasket or door-alignment concern.\u003c\/li\u003e\n  \u003cli\u003eMoisture collecting around the door opening can indicate that air is moving through part of the seal.\u003c\/li\u003e\n  \u003cli\u003eFrost appearing near the door edge may warrant inspection of the gasket contact area.\u003c\/li\u003e\n  \u003cli\u003eFlattened sections that no longer recover after the door opens may indicate reduced compression.\u003c\/li\u003e\n  \u003cli\u003eA gasket that slips from its retaining area should be inspected for damage or an incorrect seating condition.\u003c\/li\u003e\n  \u003cli\u003eFrequent wiping around the door frame may indicate a sealing concern that needs evaluation.\u003c\/li\u003e\n  \u003cli\u003eCabinet temperature concerns near a door opening can indicate that the gasket, hinges, latch, and door position should be checked together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Delfield gasket is identified for commercial refrigeration equipment service where a Delfield OEM 3234282 gasket is required. Appropriate commercial settings may include restaurant prep areas, cafeteria serving lines, foodservice maintenance departments, and refrigeration service operations working with Delfield equipment. The specific equipment application is not stated here, so selection should be based on the manufacturer part number, the original gasket, and the equipment identification information. Door seals are an important maintenance consideration in busy foodservice environments because door openings occur throughout normal operation. A properly identified replacement gasket can support planned door-assembly service when the existing seal shows wear or no longer maintains consistent contact around the opening.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Delfield OEM part number 3234282 to the original component whenever possible.\u003c\/li\u003e\n  \u003cli\u003eCompare the existing gasket's perimeter shape and profile with the replacement before purchase.\u003c\/li\u003e\n  \u003cli\u003eReview the gasket's corner arrangement and how it is held at the door edge.\u003c\/li\u003e\n  \u003cli\u003eCheck the product image against the original component for visible configuration details.\u003c\/li\u003e\n  \u003cli\u003eUse the equipment data plate and serial number when confirming the applicable service part.\u003c\/li\u003e\n  \u003cli\u003eInspect the door channel or retaining area for damage, distortion, or debris that could affect gasket seating.\u003c\/li\u003e\n  \u003cli\u003eCheck hinge condition and door alignment, since an uneven door can prevent proper gasket contact.\u003c\/li\u003e\n  \u003cli\u003eEvaluate latch or closure hardware to confirm that the door closes consistently against the cabinet opening.\u003c\/li\u003e\n  \u003cli\u003eHave qualified commercial equipment service personnel assess the door assembly when damage or alignment concerns are present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or misalignment can prevent the door from compressing the gasket evenly.\u003c\/li\u003e\n  \u003cli\u003eDoor latch or closure hardware should be checked because incomplete closure can leave a gap at the gasket contact surface.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or door channel should be examined for damage or debris that can keep the gasket from seating correctly.\u003c\/li\u003e\n  \u003cli\u003eThe cabinet-side door contact surface should be inspected for dents, buildup, or distortion that may interrupt the seal.\u003c\/li\u003e\n  \u003cli\u003eDoor closer components, where present, should be evaluated because closing force and door position affect gasket compression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Delfield part number 3234282?\u003c\/h3\u003e\n\u003cp\u003eDelfield part number 3234282 is identified as a gasket for commercial refrigeration equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is a door gasket important on commercial refrigeration equipment?\u003c\/h3\u003e\n\u003cp\u003eA door gasket helps create contact around the door perimeter, reducing air movement and moisture entry at the cabinet opening when the door is closed.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I confirm this is the correct Delfield gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 3234282 to the original part, then compare the existing gasket's profile, corner arrangement, mounting condition, and door application.\u003c\/p\u003e\n\n\u003ch3\u003eWill a new gasket correct every door-sealing issue?\u003c\/h3\u003e\n\u003cp\u003eNot always. Door hinges, latch hardware, the gasket retaining area, and cabinet-side contact surfaces can also affect whether the door seals evenly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat signs suggest a gasket needs attention?\u003c\/h3\u003e\n\u003cp\u003eSplits, flattened areas, loose corners, uneven contact, moisture near the door edge, frost around the opening, or visible gaps can indicate that the gasket and door assembly should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eIs the mounting style of this gasket confirmed?\u003c\/h3\u003e\n\u003cp\u003eThe available product identification confirms the gasket and OEM number, but does not establish its mounting style. Compare the original gasket and door retaining area before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Delfield 3234282 Door Gasket\",\"description\":\"Delfield OEM 3234282 door gasket for commercial refrigeration equipment. Helps support a sealed door edge; compare the original part before ordering.\",\"sku\":\"PD-734-136\",\"mpn\":\"3234282\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Delfield\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Delfield\"},\"category\":\"Commercial refrigeration equipment door gasket\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Delfield part number 3234282?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Delfield part number 3234282 is identified as a gasket for commercial refrigeration equipment.\"}},{\"@type\":\"Question\",\"name\":\"Why is a door gasket important on commercial refrigeration equipment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A door gasket helps create contact around the door perimeter, reducing air movement and moisture entry at the cabinet opening when the door is closed.\"}},{\"@type\":\"Question\",\"name\":\"How can I confirm this is the correct Delfield gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 3234282 to the original part, then compare the existing gasket's profile, corner arrangement, mounting condition, and door application.\"}},{\"@type\":\"Question\",\"name\":\"Will a new gasket correct every door-sealing issue?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not always. Door hinges, latch hardware, the gasket retaining area, and cabinet-side contact surfaces can also affect whether the door seals evenly.\"}},{\"@type\":\"Question\",\"name\":\"What signs suggest a gasket needs attention?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Splits, flattened areas, loose corners, uneven contact, moisture near the door edge, frost around the opening, or visible gaps can indicate that the gasket and door assembly should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Is the mounting style of this gasket confirmed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The available product identification confirms the gasket and OEM number, but does not establish its mounting style. Compare the original gasket and door retaining area before ordering.\"}}]}\u003c\/script\u003e","brand":"Delfield","offers":[{"title":"Left","offer_id":42500208623839,"sku":"PD-734-136","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Right","offer_id":42500208656607,"sku":"PD-734-137","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Center","offer_id":42500208689375,"sku":"PD-734-130","price":21.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/delfield-bain-marie-lid-cover-bracket-6592733.jpg?v=1765852748"},{"product_id":"hinge-pin-pivot-threaded","title":"Delfield Hinge Pin – Pivot Threaded Stainless Steel OEM Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Delfield\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 9321374\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 9321374\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 9321374\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Delfield 9321374 threaded pivot hinge pin is a genuine OEM door-hardware component used to support controlled door movement on verified commercial cooking equipment. A hinge pin carries the working pivot point of the door assembly, helping the door swing through its intended path while keeping the hinge hardware aligned. The threaded design is important because it provides a defined mounting relationship within the hinge assembly rather than relying on a loose, unsupported pivot. Door hardware often receives attention only after a door begins sagging, rubbing, hanging unevenly, or becoming difficult to close. Replacing a worn, damaged, or missing hinge pin can help restore a sound mechanical connection at the hinge and give service personnel a reliable OEM-identified component for the repair. Correct door movement matters in busy foodservice settings, where repeated opening and closing places steady demand on hinges, pins, latches, and related mounting hardware. This Delfield OEM part number 9321374 should be compared carefully with the removed component and its mounting arrangement before purchase. Reviewing the thread style, pivot location, condition of nearby hardware, and equipment identification information helps prevent a wrong-order delay and supports a more complete door-hardware repair.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis hinge pin forms the pivot connection that allows a supported door assembly to rotate at its hinge. Its threaded configuration helps position and retain the pin within the appropriate hinge hardware. When the pin and related hardware are in suitable condition, the door can move more consistently through its opening and closing travel. As a mechanical wear component, it should be considered alongside the hinge body, mounting fasteners, latch engagement, and door gasket condition. The Delfield 9321374 pin is identified by its OEM number for accurate replacement-part selection.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eA genuine Delfield OEM replacement provides a reliable part-number reference for this specific hinge pin: 9321374. Using the original manufacturer number helps service personnel identify the intended component and compare it directly with the removed pin before installation. That clear identification is especially useful where door hardware contains several similar-looking pins, screws, pivots, and hinge pieces. Confirming the OEM number, thread arrangement, and physical configuration supports confident ordering and helps avoid delays caused by selecting an incorrect hinge component.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA door hinge works by guiding movement around a fixed pivot point. The hinge pin occupies that pivot relationship, allowing the door-side and equipment-side hinge pieces to move relative to one another as the door opens or closes. On this Delfield threaded pivot pin, the threads provide a means of seating the pin in the hinge arrangement so the pivot is held in its intended position. Wear, damage, looseness, or improper alignment in the pin or surrounding hinge hardware can affect the door's travel. A hinge pin alone does not correct every door problem; the hinge body, mounting points, latch, closer, gasket, and door alignment may all influence how the assembly operates. Inspecting these related items during service helps identify whether the pivot pin is the component requiring replacement.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing hardware, compare the visible thread arrangement, pivot location, and mounting relationship of the existing hinge pin with Delfield OEM part number 9321374. Inspect the surrounding hinge pieces for wear or looseness that could affect door alignment after the pin is replaced.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that develops noticeable side-to-side movement at the hinge may indicate wear in the pivot pin or related hinge hardware.\u003c\/li\u003e\n  \u003cli\u003eDifficulty moving the door through a normal swing path can indicate that the hinge assembly should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that sits unevenly when closed may indicate a worn, loose, or damaged hinge connection.\u003c\/li\u003e\n  \u003cli\u003eVisible wear, bent areas, damaged threads, or corrosion on the existing pin can indicate that replacement should be considered.\u003c\/li\u003e\n  \u003cli\u003eA hinge pin that will not remain properly seated may indicate a problem with the pin, hinge body, or mounting arrangement.\u003c\/li\u003e\n  \u003cli\u003eDoor rubbing against adjacent hardware or surfaces can indicate an alignment issue requiring hinge inspection.\u003c\/li\u003e\n  \u003cli\u003eA door that does not consistently reach the latch position may indicate hinge wear or a related door-hardware condition.\u003c\/li\u003e\n  \u003cli\u003eUnusual movement, looseness, or noise at the hinge during door operation can indicate that the pivot components should be evaluated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eDelfield OEM hinge pin 9321374 is identified for commercial cooking equipment door-hardware service. It is suited to foodservice environments where equipment doors are opened frequently and dependable mechanical operation supports daily kitchen work. Restaurant kitchens, cafeteria service areas, institutional foodservice operations, and commercial kitchen service teams may encounter door-hardware repairs involving hinge pivots, mounting components, latches, and gaskets. Because specific equipment fitment is not stated here, the original component, equipment data plate information, and OEM part number should be reviewed before ordering. This approach helps ensure the selected hinge pin corresponds to the door assembly being serviced.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Delfield OEM part number 9321374 to the part number required for the equipment.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed hinge pin with the product image and part description.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the existing component is a threaded pivot-style hinge pin.\u003c\/li\u003e\n  \u003cli\u003eReview the thread arrangement and how the pin seats in the hinge assembly.\u003c\/li\u003e\n  \u003cli\u003eInspect the hinge location and pivot orientation before selecting the replacement.\u003c\/li\u003e\n  \u003cli\u003eCheck the equipment data plate and serial information for accurate service identification.\u003c\/li\u003e\n  \u003cli\u003eExamine the hinge body and mounting hardware for wear, damage, or looseness.\u003c\/li\u003e\n  \u003cli\u003eInspect door alignment and latch engagement, since either condition can affect hinge operation.\u003c\/li\u003e\n  \u003cli\u003eReview the door gasket condition if the door is not closing evenly or consistently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for damage or poor contact, as door alignment can affect how the gasket meets the door opening.\u003c\/li\u003e\n  \u003cli\u003eHinge screws and mounting hardware: Check fasteners and mounting points for looseness or wear that may allow hinge movement.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Evaluate latch engagement because a hinge-related alignment issue can affect whether the door reaches and holds at the latch position.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Inspect the closer where present, since its operation can influence door travel and closing movement alongside the hinge assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Delfield part number 9321374?\u003c\/h3\u003e\n\u003cp\u003eDelfield part number 9321374 is a threaded pivot hinge pin used as door hardware for verified commercial cooking equipment.\u003c\/p\u003e\n\n\u003ch3\u003eIs Delfield 9321374 a genuine OEM part?\u003c\/h3\u003e\n\u003cp\u003eYes. Part number 9321374 is identified as a genuine Delfield OEM hinge pin.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I compare before ordering this hinge pin?\u003c\/h3\u003e\n\u003cp\u003eCompare the OEM number, threaded pivot configuration, physical shape, hinge location, and mounting relationship with the removed component.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge pin affect door alignment?\u003c\/h3\u003e\n\u003cp\u003eIt may. Wear or looseness at the pivot can contribute to uneven door movement, but the hinge body, mounting hardware, latch, closer, and gasket should also be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this hinge pin include other door hardware?\u003c\/h3\u003e\n\u003cp\u003eThis product is identified as the Delfield 9321374 threaded pivot hinge pin. Inspect the product details and the removed assembly to determine whether additional hinge hardware is needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I identify the correct door-hardware part for my equipment?\u003c\/h3\u003e\n\u003cp\u003eUse the equipment data plate and serial information, match Delfield OEM part number 9321374 where applicable, and compare the original hinge pin with the listed component.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Delfield 9321374 Threaded Pivot Hinge Pin\",\"description\":\"Delfield 9321374 threaded pivot hinge pin is an OEM door-hardware part for commercial cooking equipment; compare the original component before ordering.\",\"sku\":\"9321374\",\"mpn\":\"9321374\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Delfield\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Delfield\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"9321374\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial cooking equipment\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Delfield part number 9321374?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Delfield part number 9321374 is a threaded pivot hinge pin used as door hardware for verified commercial cooking equipment.\"}},{\"@type\":\"Question\",\"name\":\"Is Delfield 9321374 a genuine OEM part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Part number 9321374 is identified as a genuine Delfield OEM hinge pin.\"}},{\"@type\":\"Question\",\"name\":\"What should I compare before ordering this hinge pin?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the OEM number, threaded pivot configuration, physical shape, hinge location, and mounting relationship with the removed component.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge pin affect door alignment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It may. Wear or looseness at the pivot can contribute to uneven door movement, but the hinge body, mounting hardware, latch, closer, and gasket should also be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Does this hinge pin include other door hardware?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This product is identified as the Delfield 9321374 threaded pivot hinge pin. Inspect the product details and the removed assembly to determine whether additional hinge hardware is needed.\"}},{\"@type\":\"Question\",\"name\":\"How can I identify the correct door-hardware part for my equipment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Use the equipment data plate and serial information, match Delfield OEM part number 9321374 where applicable, and compare the original hinge pin with the listed component.\"}}]}\u003c\/script\u003e","brand":"Delfield","offers":[{"title":"Default Title","offer_id":42500208885983,"sku":"9321374","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/delfield-hinge-pinpivot-threaded-bain-marie-cover-hold-open-pin-stainless-steel-oem-replacement-3495948.jpg?v=1765852805"},{"product_id":"norton-1600-top-mounted-door-closer","title":"Norton 1600 Series Top Mounted Door Closer – Adjustable Sweep \u0026 Latch","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 1601\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 1601\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-716-036\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details OEM Number: 1601 MPN: 1601 SKU: PD-716-036 Part Type: Hinge OEM Status: VERIFIED Product Overview OEM 1601 is a top-mounted door closer hinge used in commercial equipment door hardware. Its closing action helps guide a door back toward the closed position while supporting dependable door alignment, latch engagement, and gasket compression. A door that closes consistently is easier for staff to use and gives service personnel a clear mechanical reference when evaluating the condition of the door assembly. This component is identified as a hinge and is described as a top-mounted door closer with adjustable sweep and latch action. Those functions make the closer an important part of the overall door assembly rather than a simple stationary mounting piece. When door hardware is worn, loose, damaged, or out of alignment, the door may not move through its intended closing path. That can leave the latch, gasket, hinges, and mounting points under unnecessary strain. For commercial equipment service, OEM number 1601 provides the primary identification point for this part. Compare the removed component, mounting arrangement, and equipment data plate before ordering. Careful comparison helps reduce wrong-part orders when similar-looking closers or hinges have different mounting points, door relationships, or closing characteristics.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function The OEM 1601 top-mounted door closer hinge supports controlled door movement as part of a commercial equipment door assembly. It helps the door return toward the closed position and supports the mechanical relationship between the door, mounting points, latch, and gasket. Proper closing action matters because a door must align closely enough for its hardware to engage as intended. As a door-hardware component, this part should be evaluated with the complete door assembly rather than in isolation. Loose fasteners, worn hinge points, a damaged latch, or a gasket that does not compress evenly can affect how the door closes. The closer may be a relevant inspection point when the door requires extra force, fails to settle into position, closes too abruptly, or does not close consistently.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? Using the verified OEM number 1601 helps identify the intended door-hardware component and supports a more confident comparison with the original part. OEM identification is especially useful for door closers and hinges because products with a similar appearance may differ in mounting arrangement, closing action, or relationship to the door assembly. Match OEM number 1601 to the removed component and compare visible mounting points before purchase. Confirming those details helps avoid ordering a part that cannot be installed in the same position or does not support the existing door hardware arrangement.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A top-mounted door closer hinge works through the door's mechanical movement. As the door is opened, the closer is part of the hardware arrangement that manages the return movement toward the closed position. The sweep portion of the closing action relates to the door's travel through its normal closing range, while latch action relates to the final portion of travel as the door approaches the latch. Its performance depends on more than the closer alone. Door alignment, secure mounting points, hinge condition, latch position, and gasket compression all influence whether the door reaches and holds its intended closed position. If any of those related parts are worn or misaligned, the closer can appear to be the source of the problem even when the door assembly needs broader evaluation. Because this is mechanical door hardware, inspect the original component for visible wear, damage, looseness, and mounting differences. Use the verified OEM number 1601 as the main identification reference, then compare the original component and its mounting arrangement before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before replacing a door closer hinge, inspect the mounting points, door alignment, latch engagement, hinge condition, and gasket contact. A closer can only support proper closing action when the surrounding door hardware is secure and aligned.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe door may not close fully or settle into its intended closed position.\u003c\/li\u003e\n  \u003cli\u003eThe door may close too quickly or with an abrupt final movement.\u003c\/li\u003e\n  \u003cli\u003eThe door may require added force to move through its closing path.\u003c\/li\u003e\n  \u003cli\u003eLoose, worn, or damaged door-hardware mounting points should be inspected.\u003c\/li\u003e\n  \u003cli\u003eUneven door alignment may indicate that the closer, hinges, or mounting arrangement need evaluation.\u003c\/li\u003e\n  \u003cli\u003eThe latch may not engage consistently when the door reaches the closed position.\u003c\/li\u003e\n  \u003cli\u003eUneven gasket compression can indicate a door alignment or hardware concern.\u003c\/li\u003e\n  \u003cli\u003eVisible wear, damage, or looseness around the top-mounted component may indicate that service is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications OEM 1601 is identified for use as commercial equipment door hardware. It is relevant to foodservice equipment service where a door assembly relies on a top-mounted closer hinge for controlled closing movement. Door hardware is commonly evaluated by restaurant service teams, commercial kitchen maintenance personnel, and equipment service technicians when a door does not close, latch, or align as expected. Application suitability depends on the specific equipment and original door arrangement. Do not rely on appearance alone when selecting a replacement. Confirm OEM number 1601, compare the removed component, review the mounting points, and check the equipment data plate before purchase. Those checks are particularly important where the door assembly includes multiple hinges, a latch, a gasket, or other related closing hardware.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the verified OEM number 1601 to the original component and available equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed part with the product image and confirm that it is a top-mounted door closer hinge.\u003c\/li\u003e\n  \u003cli\u003eInspect the mounting points and compare their location and arrangement with the original component.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment data plate details before ordering.\u003c\/li\u003e\n  \u003cli\u003eCheck that the door assembly uses the same style of closer and hinge relationship.\u003c\/li\u003e\n  \u003cli\u003eInspect the condition of the existing hinges, fasteners, and mounting surface.\u003c\/li\u003e\n  \u003cli\u003eEvaluate latch engagement and door alignment before attributing a closing concern to the closer alone.\u003c\/li\u003e\n  \u003cli\u003eCheck gasket compression around the door because uneven contact can affect closing performance.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original component is marked or documented as OEM number 1601 when possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect gasket condition and compression because uneven contact can prevent the door from closing and sealing as intended.\u003c\/li\u003e\n  \u003cli\u003eDoor hinges: Check for wear, looseness, or misalignment that can change the door's closing path.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Evaluate latch engagement because a closer and latch work together as the door reaches its final closed position.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or mounting hardware: Inspect fasteners and mounting points for looseness or damage that can affect closer alignment.\u003c\/li\u003e\n  \u003cli\u003eDoor closer hardware: Review related closer components for wear or damage when the door's closing action is inconsistent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM number 1601?\u003c\/h3\u003e\n\u003cp\u003eOEM number 1601 identifies this top-mounted door closer hinge for commercial equipment door hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a top-mounted door closer hinge do?\u003c\/h3\u003e\n\u003cp\u003eIt supports controlled door movement toward the closed position and works with the door alignment, latch, hinges, and gasket.\u003c\/p\u003e\n\n\u003ch3\u003eShould I replace the closer if the door will not latch?\u003c\/h3\u003e\n\u003cp\u003eThe closer should be inspected, but latch engagement can also be affected by door alignment, hinge wear, mounting points, or gasket condition.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I compare before ordering OEM 1601?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 1601, compare the original component, inspect the mounting arrangement, and confirm the equipment data plate details.\u003c\/p\u003e\n\n\u003ch3\u003eCan gasket condition affect door closing action?\u003c\/h3\u003e\n\u003cp\u003eYes. A gasket with uneven compression can affect how the door settles and may contribute to a door-closing concern.\u003c\/p\u003e\n\n\u003ch3\u003eWhy should the hinges be inspected with the door closer?\u003c\/h3\u003e\n\u003cp\u003eWorn or misaligned hinges can alter the door's travel and make a closer appear to be at fault when the complete door assembly needs attention.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"OEM 1601 Top-Mounted Door Closer Hinge\",\"description\":\"OEM 1601 top-mounted door closer hinge for commercial equipment door hardware. Compare mounting points and the original component before ordering.\",\"sku\":\"PD-716-036\",\"mpn\":\"1601\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Number\",\"value\":\"1601\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial cooking equipment\"}],\"image\":\"OEM 1601 top-mounted door closer hinge\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM number 1601?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OEM number 1601 identifies this top-mounted door closer hinge for commercial equipment door hardware.\"}},{\"@type\":\"Question\",\"name\":\"What does a top-mounted door closer hinge do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It supports controlled door movement toward the closed position and works with the door alignment, latch, hinges, and gasket.\"}},{\"@type\":\"Question\",\"name\":\"Should I replace the closer if the door will not latch?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The closer should be inspected, but latch engagement can also be affected by door alignment, hinge wear, mounting points, or gasket condition.\"}},{\"@type\":\"Question\",\"name\":\"What should I compare before ordering OEM 1601?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 1601, compare the original component, inspect the mounting arrangement, and confirm the equipment data plate details.\"}},{\"@type\":\"Question\",\"name\":\"Can gasket condition affect door closing action?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A gasket with uneven compression can affect how the door settles and may contribute to a door-closing concern.\"}},{\"@type\":\"Question\",\"name\":\"Why should the hinges be inspected with the door closer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Worn or misaligned hinges can alter the door's travel and make a closer appear to be at fault when the complete door assembly needs attention.\"}}]}\u003c\/script\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":42500209148127,"sku":"PD-716-036","price":395.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/top-mounted-door-closer-norton-1600-series-adjustable-sweep-latch-speed-walk-in-cooler-freezer-door-8657907.jpg?v=1765853165"},{"product_id":"door-handle","title":"Glastender Undercounter Refrigerator Pull Handle | Chrome OEM","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Glastender\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 06001462\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 06001462\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-758-015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Glastender 06001462 hinge is an OEM door-hardware component used in commercial refrigeration equipment. A properly operating hinge supports the door assembly, helps maintain its intended position, and allows the door to open and close with controlled movement. That mechanical support matters because door alignment affects how the door meets the cabinet opening and how related sealing and latching components perform during normal service. Wear, looseness, physical damage, or incorrect hinge selection can contribute to difficult door movement and poor door alignment. Replacing a worn or damaged hinge with the correct Glastender manufacturer part number helps technicians and operators restore a dependable door assembly without relying on unverified fitment assumptions. This OEM hinge should be identified by part number 06001462 and compared carefully with the removed component before ordering. For commercial refrigeration service, door hardware deserves the same attention as other cabinet components. A door that moves smoothly and aligns correctly can help reduce unnecessary strain on related hardware and supports routine equipment operation. Confirming the original component, mounting arrangement, and equipment data plate before purchase is the best way to reduce a wrong-part order.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Glastender door hinge provides mechanical support and pivot movement for a commercial refrigeration door assembly. Its role is to hold the door in its intended relationship to the cabinet while allowing repeated opening and closing. Correct hinge condition helps the door remain aligned with related components such as the gasket, latch, and closer. A hinge is not a temperature-control component, but its condition can influence the practical operation of the door assembly. Loose, worn, bent, or damaged hardware may allow the door to sit unevenly, move with resistance, or fail to close as intended. Using OEM part number 06001462 helps identify the correct Glastender hinge for service planning and replacement.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eGenuine Glastender OEM part number 06001462 provides a reliable identification point when replacing the original hinge. Matching the manufacturer part number and comparing the removed component helps reduce uncertainty during commercial equipment service. OEM identification is especially useful for door hardware because mounting arrangement, orientation, and door relationship should be confirmed before a replacement is selected.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA door hinge forms the mechanical pivot between the door assembly and its mounting location. As the door is opened, the hinge guides movement around its pivot point; as the door closes, it helps return the door to its intended alignment at the cabinet opening. The hinge works together with the door’s mounting hardware, gasket, latch, and any applicable closer to support controlled operation. Because a commercial refrigeration door is opened repeatedly during normal use, hinge condition should be considered whenever the door appears loose, uneven, difficult to move, or unable to close consistently. A hinge problem may be limited to the component itself, but mounting hardware, door position, and related door hardware should also be inspected. The Glastender 06001462 hinge is identified by its OEM number for accurate replacement selection. Confirming the original part and its installed orientation before service helps ensure the replacement is appropriate for the equipment.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the hinge, compare the removed component with OEM number 06001462 and inspect the mounting points, hinge hardware, door position, gasket contact, latch operation, and any door closer involved in the assembly.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that feels loose during opening or closing may indicate hinge wear or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eUneven door position at the cabinet opening can indicate that the hinge and mounting points should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that rubs, binds, or moves with resistance may indicate a damaged or misaligned hinge assembly.\u003c\/li\u003e\n  \u003cli\u003eVisible bending, cracking, corrosion, or physical damage can indicate that hinge replacement should be considered.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain in its intended position may indicate wear in the hinge or related door hardware.\u003c\/li\u003e\n  \u003cli\u003eUneven gasket contact around the door opening may indicate that door alignment and hinge condition should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eLatch engagement that becomes inconsistent can indicate a door-position issue involving the hinge, latch, or strike relationship.\u003c\/li\u003e\n  \u003cli\u003eRecurring loosening of door hardware may indicate that the hinge mounting area and related fasteners need inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Glastender OEM hinge is intended for commercial refrigeration door-hardware service where OEM part number 06001462 is confirmed as the correct replacement. It is relevant to restaurant operations, bar service areas, foodservice maintenance teams, and commercial refrigeration service providers that maintain equipment with frequently used door assemblies. Door hardware service should focus on the complete mechanical relationship between the hinge, door, gasket, latch, mounting points, and cabinet opening. Equipment model and serial number should be confirmed against the data plate when fitment documentation is needed. No specific model compatibility is stated here.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Glastender OEM part number 06001462 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the replacement part is identified as a hinge, not another door-hardware component.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed component with available product imagery before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect the hinge mounting points and compare their arrangement with the original component.\u003c\/li\u003e\n  \u003cli\u003eConfirm the installed hinge orientation and its relationship to the door assembly.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment data plate for the model and serial number when fitment confirmation is needed.\u003c\/li\u003e\n  \u003cli\u003eInspect the door gasket for uneven contact that may be related to door alignment.\u003c\/li\u003e\n  \u003cli\u003eCheck the latch, strike, and any door closer for wear or adjustment concerns before replacing only the hinge.\u003c\/li\u003e\n  \u003cli\u003eUse SKU PD-758-015 as an additional PartsDirectOnline ordering reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for uneven compression or gaps that may result when door alignment is affected by hinge condition.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check related hinge hardware for looseness, wear, damage, or missing pieces before installing a replacement hinge.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect latch engagement because an uneven door position can affect how the latch meets its mating hardware.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer, where applicable, because it works with the hinge to guide door movement and closing action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Glastender part number 06001462?\u003c\/h3\u003e\n\u003cp\u003eGlastender part number 06001462 is an OEM hinge used as door hardware in commercial refrigeration equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a commercial refrigeration door hinge do?\u003c\/h3\u003e\n\u003cp\u003eA door hinge supports the door assembly and provides the pivot movement needed for normal opening and closing while helping maintain door alignment.\u003c\/p\u003e\n\n\u003ch3\u003eShould I replace the hinge if the door is difficult to close?\u003c\/h3\u003e\n\u003cp\u003eDifficult closing may indicate a hinge concern, but the gasket, mounting hardware, latch, strike, door position, and any applicable closer should also be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct Glastender hinge?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM part number 06001462 to the original component or approved equipment documentation, then compare the installed orientation and mounting arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm equipment model compatibility?\u003c\/h3\u003e\n\u003cp\u003eNo specific equipment model compatibility is stated. Confirm the equipment model and serial number against the data plate when fitment documentation is needed.\u003c\/p\u003e\n\n\u003ch3\u003eWhy should the door gasket be inspected when replacing a hinge?\u003c\/h3\u003e\n\u003cp\u003eA worn or misaligned hinge can affect the door’s position at the cabinet opening. Inspecting gasket contact helps identify related door-alignment concerns.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Glastender 06001462 Commercial Door Hinge\",\"description\":\"Glastender OEM 06001462 door hinge for commercial refrigeration door hardware. Compare the original component and mounting points before ordering.\",\"sku\":\"PD-758-015\",\"mpn\":\"06001462\",\"image\":\"Glastender 06001462 commercial refrigeration door hinge\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Glastender\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Glastender\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"06001462\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial refrigeration equipment\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Glastender part number 06001462?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Glastender part number 06001462 is an OEM hinge used as door hardware in commercial refrigeration equipment.\"}},{\"@type\":\"Question\",\"name\":\"What does a commercial refrigeration door hinge do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A door hinge supports the door assembly and provides the pivot movement needed for normal opening and closing while helping maintain door alignment.\"}},{\"@type\":\"Question\",\"name\":\"Should I replace the hinge if the door is difficult to close?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Difficult closing may indicate a hinge concern, but the gasket, mounting hardware, latch, strike, door position, and any applicable closer should also be inspected.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct Glastender hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM part number 06001462 to the original component or approved equipment documentation, then compare the installed orientation and mounting arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm equipment model compatibility?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No specific equipment model compatibility is stated. Confirm the equipment model and serial number against the data plate when fitment documentation is needed.\"}},{\"@type\":\"Question\",\"name\":\"Why should the door gasket be inspected when replacing a hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A worn or misaligned hinge can affect the door’s position at the cabinet opening. Inspecting gasket contact helps identify related door-alignment concerns.\"}}]}\u003c\/script\u003e","brand":"Glastender","offers":[{"title":"Default Title","offer_id":42500209803487,"sku":"PD-758-015","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/glastender-under-counter-refrigerator-pull-handle-chrome-finish-oem-replacement-cooler-door-fits-bb-ds-fv-kc-lp-nd-pt-series-5455472.jpg?v=1765853047"},{"product_id":"key-cylinder","title":"Glastender Lock Cylinder with Keys | Chrome Finish OEM","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Glastender\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 06001536\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 06001536\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-758-016\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details Manufacturer: Glastender OEM Part Number: 06001536 MPN: 06001536 SKU: PD-758-016 Part Type: Hinge Product Overview Glastender OEM 06001536 is identified as a hinge for commercial equipment door-hardware service. A properly operating hinge supports the door through its travel, helps maintain alignment at the opening, and contributes to consistent closing action. Although a hinge is a straightforward mechanical component, its condition can affect daily access, closure reliability, and the relationship between the door and surrounding hardware. Wear, looseness, bent mounting areas, or damage at the pivot can allow a door to sit unevenly or move differently than intended. That can make the door harder to operate and may place added strain on related hardware. Replacing a worn or damaged hinge with the correct Glastender OEM part number helps technicians keep the door assembly identified correctly during commercial equipment service. This OEM hinge is a practical replacement choice when the removed component, mounting arrangement, and manufacturer part number correspond with the equipment being serviced. Review the original hinge carefully before ordering, including its orientation, pivot arrangement, mounting points, and condition of the nearby door hardware. Confirming these details helps reduce wrong-part orders and supports a more orderly repair.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This Glastender hinge provides a mechanical pivot point for a door assembly. Its role is to support controlled door movement while helping the door remain positioned in relation to the frame, latch area, and other connected hardware. When the hinge is secure and in good condition, the door can open and close with more predictable movement. Because hinges carry the repeated motion and loading of normal door use, they should be inspected when a door becomes loose, uneven, difficult to move, or inconsistent at closure. The correct replacement hinge helps restore the intended mechanical connection without assuming fitment for equipment that has not been confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? Glastender OEM part number 06001536 gives service teams a reliable identification point when replacing the original hinge. Matching the manufacturer part number with the removed component helps distinguish the correct door-hardware part from similar-looking hinges with different mounting, orientation, or pivot details. Using the identified OEM part number can reduce ordering uncertainty and supports a more confident comparison during commercial equipment service.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A hinge joins the moving door assembly to its fixed mounting location and allows the door to pivot through its normal range of motion. The hinge position affects how the door meets the surrounding frame and related closing hardware. Repeated opening and closing can gradually expose wear at the pivot, loosen mounting hardware, or reveal alignment concerns elsewhere in the door assembly. When the hinge, mounting points, and related hardware are secure, the door can move with steadier support. If the door begins to sag, bind, shift, or close unevenly, the hinge should be evaluated along with the gasket, latch, closer, and mounting fasteners. The hinge itself may be involved, but surrounding components can also contribute to door-operation concerns.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before replacing the hinge, compare the removed component with OEM 06001536 and inspect the door mounting points, pivot area, fasteners, and door alignment. A replacement hinge may not correct a closure concern if adjacent hardware is worn, loose, bent, or out of position.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that feels loose during opening or closing may indicate hinge wear or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eA door that sits unevenly at the frame should be inspected for hinge condition and alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eBinding, rubbing, or rough movement can indicate a worn pivot area, damaged hinge, or shifted door position.\u003c\/li\u003e\n  \u003cli\u003eVisible movement at the hinge mounting area may indicate loose or damaged fasteners.\u003c\/li\u003e\n  \u003cli\u003eA door that does not close consistently may indicate a hinge concern or a related latch, closer, or gasket issue.\u003c\/li\u003e\n  \u003cli\u003eUneven gaps around a closed door can indicate that the hinge and surrounding door hardware should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA bent, cracked, corroded, or visibly damaged hinge should be evaluated for replacement.\u003c\/li\u003e\n  \u003cli\u003eRepeated adjustment needs at the door assembly may indicate wear in the hinge or connected hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This Glastender hinge is intended for commercial equipment service where the confirmed original component uses OEM part number 06001536. It is relevant to restaurant kitchens, foodservice maintenance operations, commercial kitchen repair teams, and service companies responsible for keeping door assemblies operating properly. Door hardware is often evaluated during routine service because alignment, closure movement, and hardware condition can affect everyday equipment access. Confirm the equipment data plate, original component, and mounting arrangement before ordering, as model-specific application information is not provided here.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Glastender OEM part number 06001536 to the original component and applicable equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed hinge with the product image and confirm the overall hinge style.\u003c\/li\u003e\n  \u003cli\u003eConfirm the hinge orientation and door position before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect the mounting points and compare their arrangement with the original component.\u003c\/li\u003e\n  \u003cli\u003eCheck the pivot area for matching construction and placement.\u003c\/li\u003e\n  \u003cli\u003eConfirm the Glastender equipment model and serial number from the data plate.\u003c\/li\u003e\n  \u003cli\u003eInspect the door for sagging, bent hardware, or damaged mounting areas that could affect replacement results.\u003c\/li\u003e\n  \u003cli\u003eReview the condition of the gasket, latch, closer, and hinge fasteners before replacing door hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for wear, compression loss, or damage that may affect door closure after hinge service.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check mounting fasteners and pivot hardware for looseness, wear, or damage that can cause door movement.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Evaluate the latch when a door does not remain closed consistently, since latch engagement can be affected by alignment.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Inspect the closer where equipped, because closing force and door movement may affect how the door returns to the frame.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Glastender OEM 06001536?\u003c\/h3\u003e\n\u003cp\u003eGlastender OEM 06001536 is identified as a hinge used for commercial equipment door-hardware service.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct Glastender hinge?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM part number 06001536 to the original component and applicable equipment documentation. Also compare the hinge orientation, pivot arrangement, and mounting points before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge affect door operation?\u003c\/h3\u003e\n\u003cp\u003eYes. A worn, loose, or damaged hinge may contribute to uneven door movement, sagging, binding, or inconsistent closure. Related door hardware should also be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the door gasket when replacing a hinge?\u003c\/h3\u003e\n\u003cp\u003eYes. A gasket with wear, damage, or poor compression can contribute to closure concerns. Inspecting it with the hinge helps identify related door-assembly issues.\u003c\/p\u003e\n\n\u003ch3\u003eWhat other components should be checked with this hinge?\u003c\/h3\u003e\n\u003cp\u003eInspect hinge screws or pins, the door latch, the door closer where equipped, the gasket, and the door mounting area for wear, looseness, damage, or alignment concerns.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Glastender Lock Cylinder with Keys | Chrome Finish OEM\",\"description\":\"Glastender OEM 06001536 hinge for commercial equipment door hardware. Match the original component, mounting arrangement, and equipment data plate.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Glastender\"},\"mpn\":\"06001536\",\"sku\":\"PD-758-016\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Glastender OEM 06001536?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Glastender OEM 06001536 is identified as a hinge used for commercial equipment door-hardware service.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct Glastender hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM part number 06001536 to the original component and applicable equipment documentation. Also compare the hinge orientation, pivot arrangement, and mounting points before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge affect door operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A worn, loose, or damaged hinge may contribute to uneven door movement, sagging, binding, or inconsistent closure. Related door hardware should also be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the door gasket when replacing a hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A gasket with wear, damage, or poor compression can contribute to closure concerns. Inspecting it with the hinge helps identify related door-assembly issues.\"}},{\"@type\":\"Question\",\"name\":\"What other components should be checked with this hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect hinge screws or pins, the door latch, the door closer where equipped, the gasket, and the door mounting area for wear, looseness, damage, or alignment concerns.\"}}]}\u003c\/script\u003e","brand":"Glastender","offers":[{"title":"Default Title","offer_id":42500210229471,"sku":"PD-758-016","price":47.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/glastender-lock-cylinder-complete-with-keys-chrome-finish-oem-replacement-for-cooler-doors-fits-bb-ds-fv-kc-lp-nd-pt-series-3433542.jpg?v=1765853166"},{"product_id":"hinge-1","title":"Traulsen Edgemount Cam Lift Hinge — 1-5\/8 Inch Offset | OEM Replacement | For Cooler \u0026 Freezer Doors","description":"\u003ch2\u003eTraulsen Edgemount Cam Lift Hinge — 1-5\/8\" Offset | OEM Replacement | For Cooler \u0026amp; Freezer Doors\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"1-5\/8\" Offset","offer_id":42716671344863,"sku":"PD-120-774","price":49.7,"currency_code":"USD","in_stock":true},{"title":"1-3\/8\" Offset","offer_id":42716671377631,"sku":"PD-786-085","price":62.36,"currency_code":"USD","in_stock":true},{"title":"1-5\/8\" Offset (w\/ Spring)","offer_id":42716671410399,"sku":"PD-120-775","price":79.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/traulsen-edgemount-cam-lift-hinge-1-58-offset-oem-replacement-for-cooler-freezer-doors-5745969.jpg?v=1765852868"},{"product_id":"traulsen-lock-bolt","title":"Traulsen Lock Bolt | OEM Replacement for T41–T45 Lock Cylinders","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Traulsen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 358-13189-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 358-13189-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 358-13189-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Lock Bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Traulsen 358-13189-00 lock bolt is an OEM door-hardware component used with T41–T45 lock cylinders on verified commercial refrigeration equipment. As part of the door locking arrangement, the lock bolt supports secure door closure and helps the lock assembly perform its intended mechanical role. A properly operating lock assembly matters in busy foodservice environments because cabinet doors are opened frequently and must close, latch, and remain secured as expected during normal use. When a lock-related component shows wear, binds, is damaged, or no longer matches the original hardware, replacing the correct part can help restore dependable door operation. This Traulsen OEM part should be identified by manufacturer part number 358-13189-00 and compared carefully with the removed component before purchase. Because door hardware can vary by cabinet configuration and serial number, confirming the original part, lock-cylinder arrangement, mounting relationship, and equipment identification is the most reliable way to prevent a wrong order.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis lock bolt serves a mechanical role within the Traulsen door lock arrangement associated with verified T41–T45 lock cylinders. It is intended to work with the related lock hardware so the door can be secured when the lock is operated. Its condition can affect how smoothly the locking hardware moves and whether the door-locking arrangement performs as expected. The lock bolt should be evaluated as part of the complete door assembly rather than as an isolated item. Door alignment, hinge condition, latch operation, and the condition of the associated lock cylinder can all influence how the hardware feels and functions. Match OEM number 358-13189-00 to the original component before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eA genuine Traulsen OEM part helps maintain clear part-number identification when servicing commercial refrigeration door hardware. Ordering 358-13189-00 by its manufacturer number gives technicians and facility teams a dependable reference for comparing the original lock bolt, associated lock-cylinder arrangement, and cabinet information. Careful OEM matching is especially valuable when similar-looking door hardware may differ in configuration or mounting relationship.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eThe lock bolt works as part of a mechanical door-locking arrangement. When the associated lock hardware is operated, the bolt is involved in securing the door assembly in its intended closed position. Smooth movement depends on the condition and alignment of the related hardware, including the lock cylinder, door, hinges, and latch-side components where applicable. A door that is out of alignment or hardware that is worn, loose, damaged, or obstructed can place added strain on the locking arrangement. For that reason, service work should include a careful comparison of the removed lock bolt and an inspection of the surrounding door hardware. This part is identified as Traulsen OEM number 358-13189-00 for use with verified T41–T45 lock cylinders. Confirm cabinet identification and the original component before selecting the replacement.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the lock bolt, compare the removed component with OEM number 358-13189-00 and inspect the lock cylinder, hinge alignment, door position, and related latch hardware for wear or interference. Addressing a door-alignment concern can help prevent repeated strain on replacement locking components.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDifficulty locking or unlocking the cabinet door may indicate that the lock bolt or related door hardware should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain secured when locked can indicate wear, damage, or misalignment in the lock arrangement.\u003c\/li\u003e\n  \u003cli\u003eBinding or rough movement during lock operation may indicate a component alignment concern.\u003c\/li\u003e\n  \u003cli\u003eVisible damage, corrosion, deformation, or missing material on the original lock bolt indicates that replacement should be considered.\u003c\/li\u003e\n  \u003cli\u003eA key that turns but does not secure the door may indicate that the lock cylinder and lock-bolt arrangement need evaluation.\u003c\/li\u003e\n  \u003cli\u003eA door that requires unusual force to lock may indicate hinge, latch, or door-alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eRepeated loosening or movement of nearby door hardware can indicate that mounting and related components should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA cabinet door that shifts at the latch side may indicate door-hardware wear affecting lock operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Traulsen lock bolt is intended for verified commercial refrigeration door-hardware service associated with T41–T45 lock cylinders. It may be relevant to cabinet service performed in restaurants, institutional kitchens, commercial cold-storage areas, and other foodservice locations that rely on secure, frequently used refrigerated equipment doors. The correct application must be confirmed from the original component, equipment identification, serial number, and lock-cylinder arrangement. Do not rely on appearance alone when ordering door hardware, since similar components can have different mechanical relationships within the door assembly.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Traulsen OEM number 358-13189-00 to the original component.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the part is a lock bolt, not another door-hardware item.\u003c\/li\u003e\n  \u003cli\u003eVerify the equipment identification and serial number before purchase.\u003c\/li\u003e\n  \u003cli\u003eConfirm the original lock-cylinder arrangement is identified for T41–T45 lock cylinders.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed component with available product imagery.\u003c\/li\u003e\n  \u003cli\u003eInspect the original component for its mechanical relationship to the lock cylinder and door hardware.\u003c\/li\u003e\n  \u003cli\u003eCheck door alignment and hinge condition, as misalignment can affect lock operation.\u003c\/li\u003e\n  \u003cli\u003eInspect related latch-side hardware for wear, looseness, or interference.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the replacement is appropriate for the cabinet door configuration before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLock cylinder: Inspect the associated lock cylinder because its operation directly affects how the lock bolt is engaged.\u003c\/li\u003e\n  \u003cli\u003eDoor hinges: Check hinges for wear or alignment concerns that can place the door out of position at the locking point.\u003c\/li\u003e\n  \u003cli\u003eDoor latch hardware: Inspect latch-side hardware for damage or interference that may affect secure door closure.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the door closer, where present, because incomplete or uneven door closing can affect lock alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Traulsen part 358-13189-00?\u003c\/h3\u003e\n\u003cp\u003eTraulsen 358-13189-00 is an OEM lock bolt used with verified T41–T45 lock cylinders on commercial refrigeration door hardware.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct Traulsen lock bolt?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 358-13189-00 to the original component, compare the removed part with product imagery, and verify the equipment identification, serial number, and lock-cylinder arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat can cause a refrigeration cabinet door lock to bind?\u003c\/h3\u003e\n\u003cp\u003eBinding may indicate wear, damage, or alignment concerns involving the lock bolt, lock cylinder, hinges, door position, or related latch hardware. Inspect the complete door assembly before replacing parts.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the hinges when replacing a lock bolt?\u003c\/h3\u003e\n\u003cp\u003eYes. Hinge wear or poor door alignment can affect how the door meets the locking point and can place added strain on the lock hardware.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this lock bolt fit every Traulsen cabinet?\u003c\/h3\u003e\n\u003cp\u003eNo. Confirm OEM number 358-13189-00 against the original component and verify the equipment identification, serial number, and applicable lock-cylinder arrangement before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is the original component comparison important for door hardware?\u003c\/h3\u003e\n\u003cp\u003eDoor hardware can appear similar while differing in its mechanical relationship, cabinet configuration, or lock arrangement. Comparing the original component helps reduce ordering errors.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Traulsen 358-13189-00 OEM Lock Bolt\",\"description\":\"Traulsen 358-13189-00 OEM lock bolt for commercial refrigeration door hardware. Verify the original part, cabinet identification, and serial number.\",\"sku\":\"358-13189-00\",\"mpn\":\"358-13189-00\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Traulsen\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Traulsen\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"358-13189-00\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Lock Bolt\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial refrigeration equipment\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Traulsen part 358-13189-00?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Traulsen 358-13189-00 is an OEM lock bolt used with verified T41–T45 lock cylinders on commercial refrigeration door hardware.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct Traulsen lock bolt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 358-13189-00 to the original component, compare the removed part with product imagery, and verify the equipment identification, serial number, and lock-cylinder arrangement.\"}},{\"@type\":\"Question\",\"name\":\"What can cause a refrigeration cabinet door lock to bind?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Binding may indicate wear, damage, or alignment concerns involving the lock bolt, lock cylinder, hinges, door position, or related latch hardware. Inspect the complete door assembly before replacing parts.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the hinges when replacing a lock bolt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Hinge wear or poor door alignment can affect how the door meets the locking point and can place added strain on the lock hardware.\"}},{\"@type\":\"Question\",\"name\":\"Does this lock bolt fit every Traulsen cabinet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Confirm OEM number 358-13189-00 against the original component and verify the equipment identification, serial number, and applicable lock-cylinder arrangement before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Why is the original component comparison important for door hardware?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Door hardware can appear similar while differing in its mechanical relationship, cabinet configuration, or lock arrangement. Comparing the original component helps reduce ordering errors.\"}}]}\u003c\/script\u003e","brand":"Traulsen","offers":[{"title":"1-1\/2\"","offer_id":42727656030431,"sku":"358-13189-00","price":15.2,"currency_code":"USD","in_stock":true},{"title":"1-1\/8\"","offer_id":42727656063199,"sku":"358-15242-02","price":22.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/traulsen-lock-bolt-oem-replacement-3665986.jpg?v=1765853166"},{"product_id":"keys","title":"Traulsen Keys for Lock Cylinders","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Traulsen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 358-28924-42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 358-28924-42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-120-460\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eTraulsen OEM hinge 358-28924-42 is a door-hardware component used to support controlled door movement on commercial foodservice equipment. A properly matched hinge helps the door swing, sit, and close in its intended position while carrying the load placed on the door assembly during normal use. Because door hardware affects alignment, closure, and gasket contact, a worn or damaged hinge can contribute to difficult door operation and make routine cabinet service more involved. This Traulsen hinge gives service teams a manufacturer-identified replacement option when the original component requires attention. Matching the OEM number and comparing the original hinge before purchase helps avoid ordering a part with the wrong mounting arrangement, orientation, or hardware configuration. Inspecting the surrounding door hardware at the same time can help identify wear that may affect the replacement hinge or the door’s closing action. For busy foodservice operations, correct door-hardware selection supports dependable daily access and helps maintain a properly aligned door assembly.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThe hinge provides a mechanical pivot point between the door and its supporting structure. It carries the door through repeated opening and closing cycles while helping keep the door positioned correctly relative to the latch, frame, and gasket. When hinge hardware becomes loose, worn, bent, or damaged, the door may no longer sit squarely in the opening. This can affect closure effort and gasket contact. Traulsen OEM part 358-28924-42 is intended to replace the identified hinge component so the door assembly can be restored with the correct manufacturer part number. The hinge should be evaluated as part of the complete door-hardware arrangement rather than as an isolated component.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eUsing the Traulsen OEM part number provides a clear identification point when replacing this hinge. OEM number 358-28924-42 helps service personnel match the replacement to the original manufacturer-identified component and reduce uncertainty during ordering. Comparing the original hinge, its orientation, and its mounting points remains important, especially where door hardware has been serviced previously. Choosing the correctly identified OEM hinge supports a more confident repair decision and helps prevent delays caused by an incorrect mechanical component.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA hinge works by allowing the door to rotate around a fixed pivot while maintaining a stable relationship between the door and its supporting structure. Its position affects how the door travels through its swing, where it rests when closed, and how the latch and gasket meet their corresponding surfaces. In commercial service, repeated use can place ongoing load on hinge hardware, mounting points, and related door components. If the hinge develops wear or loses secure mounting, the door can shift from its intended alignment. That shift may place added strain on the latch, door closer, gasket, or adjoining hinge hardware. Replacing the correct hinge addresses the pivot component, while inspection of the full door assembly helps determine whether other related parts also need attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing a hinge, compare the original component with OEM part 358-28924-42 for orientation, mounting points, and overall door-hardware arrangement. Inspect the door alignment, hinge fasteners, latch engagement, and gasket contact for related wear or damage.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that sags or sits lower than its normal closed position may indicate hinge wear or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eUneven gaps around the door can indicate that the hinge and related mounting points should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that requires extra force to open or close may indicate a worn, damaged, or misaligned hinge arrangement.\u003c\/li\u003e\n  \u003cli\u003eDifficulty engaging the door latch can indicate that door alignment or hinge hardware needs evaluation.\u003c\/li\u003e\n  \u003cli\u003eVisible movement at a hinge mounting point may indicate loose or worn hardware.\u003c\/li\u003e\n  \u003cli\u003eA door that does not rest squarely against its closing surface may indicate hinge-related alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eRubbing, binding, or inconsistent door travel can indicate that the hinge and adjoining door hardware should be inspected.\u003c\/li\u003e\n  \u003cli\u003eReduced gasket contact around part of the door perimeter may indicate that the door alignment requires evaluation.\u003c\/li\u003e\n  \u003cli\u003eA bent, cracked, or visibly worn hinge may indicate that replacement is needed.\u003c\/li\u003e\n  \u003cli\u003eRepeated need to reposition the door may indicate wear in the hinge, mounting hardware, or related door components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Traulsen hinge is relevant to commercial equipment service involving door assemblies and related mechanical hardware. Foodservice maintenance teams, restaurant kitchens, institutional kitchens, and service providers may encounter door-hardware wear where frequent access places ongoing demand on hinges, latches, closers, and gaskets. The part should be selected by its verified Traulsen OEM number, 358-28924-42, and by direct comparison with the original component. No equipment-specific fitment is stated here, so purchasers should confirm the equipment identification label and compare the existing hinge configuration before ordering. Correct identification is especially important when a door assembly has prior service history or non-original hardware.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Traulsen OEM number 358-28924-42 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the original hinge with the product image and part description.\u003c\/li\u003e\n  \u003cli\u003eConfirm the hinge orientation and door-side position before ordering.\u003c\/li\u003e\n  \u003cli\u003eCompare the mounting-point arrangement on the original component.\u003c\/li\u003e\n  \u003cli\u003eInspect the existing hinge for visible wear, bending, cracks, or damaged mounting areas.\u003c\/li\u003e\n  \u003cli\u003eCheck the equipment identification label, including the serial number, for service reference.\u003c\/li\u003e\n  \u003cli\u003eReview the door alignment and latch engagement for related issues that may remain after hinge replacement.\u003c\/li\u003e\n  \u003cli\u003eInspect the door gasket contact area, since a shifted door can affect sealing contact.\u003c\/li\u003e\n  \u003cli\u003eConfirm whether hinge fasteners, pins, or other related door hardware also require attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect gasket contact and compression because door alignment can affect how evenly the gasket meets its closing surface.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check related hinge hardware for looseness, wear, or damage that could affect the replacement hinge’s secure mounting.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Evaluate latch engagement because a shifted door may not align consistently with the latch.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Inspect the closer where present, since door movement and closing action can be affected by multiple door-hardware components.\u003c\/li\u003e\n  \u003cli\u003eDoor mounting area: Examine the supporting door and frame mounting points for wear or damage that may contribute to misalignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Traulsen OEM part 358-28924-42?\u003c\/h3\u003e\n\u003cp\u003eTraulsen OEM part 358-28924-42 is identified as a hinge used in a commercial equipment door-hardware assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this Traulsen hinge is the correct part?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 358-28924-42 to the original component or approved equipment documentation, then compare the original hinge orientation and mounting-point arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge affect door closure?\u003c\/h3\u003e\n\u003cp\u003eYes. Hinge wear, damage, or loose mounting can affect door alignment, latch engagement, and gasket contact.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should be inspected with a replacement hinge?\u003c\/h3\u003e\n\u003cp\u003eInspect the door gasket, hinge screws or pins, door latch, door closer where present, and the door mounting area for related wear or damage.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is hinge orientation important when ordering?\u003c\/h3\u003e\n\u003cp\u003eDoor hinges can differ by orientation and mounting arrangement. Comparing the original component helps prevent an incorrect mechanical match.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm equipment-specific fitment?\u003c\/h3\u003e\n\u003cp\u003eNo equipment-specific fitment is stated. Confirm the equipment identification label and compare the original component before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Traulsen OEM 358-28924-42 Door Hinge\",\"description\":\"Traulsen OEM 358-28924-42 door hinge supports door alignment and movement. Match the original hinge, mounting points, and orientation before ordering.\",\"sku\":\"PD-120-460\",\"mpn\":\"358-28924-42\",\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Traulsen\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"358-28924-42\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Traulsen OEM part 358-28924-42?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Traulsen OEM part 358-28924-42 is identified as a hinge used in a commercial equipment door-hardware assembly.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this Traulsen hinge is the correct part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 358-28924-42 to the original component or approved equipment documentation, then compare the original hinge orientation and mounting-point arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge affect door closure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Hinge wear, damage, or loose mounting can affect door alignment, latch engagement, and gasket contact.\"}},{\"@type\":\"Question\",\"name\":\"What should be inspected with a replacement hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect the door gasket, hinge screws or pins, door latch, door closer where present, and the door mounting area for related wear or damage.\"}},{\"@type\":\"Question\",\"name\":\"Why is hinge orientation important when ordering?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Door hinges can differ by orientation and mounting arrangement. Comparing the original component helps prevent an incorrect mechanical match.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm equipment-specific fitment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No equipment-specific fitment is stated. Confirm the equipment identification label and compare the original component before ordering.\"}}]}\u003c\/script\u003e","brand":"Traulsen","offers":[{"title":"T-41","offer_id":42727565525215,"sku":"PD-120-460","price":9.5,"currency_code":"USD","in_stock":true},{"title":"T-42","offer_id":42727565557983,"sku":"PD-120-461","price":37.2,"currency_code":"USD","in_stock":true},{"title":"T-43","offer_id":42727565590751,"sku":"PD-120-462","price":16.5,"currency_code":"USD","in_stock":true},{"title":"T-44","offer_id":42727565623519,"sku":"PD-120-463","price":15.5,"currency_code":"USD","in_stock":true},{"title":"Master Key","offer_id":42727565656287,"sku":"PD-120-465","price":64.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/traulsen-keys-for-lock-cylinders-9420669.jpg?v=1765853167"},{"product_id":"traulsen-light-cover","title":"Traulsen Light Cover — OEM Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Traulsen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 337-30858-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 337-30858-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-120-264\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Light cover hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details Manufacturer: Traulsen OEM Part Number: 337-30858-00 SKU: PD-120-264 Part Type: Light cover hinge OEM Status: VERIFIED Product Overview The Traulsen 337-30858-00 light cover hinge supports the movement and positioning of a light cover in a commercial equipment lighting assembly. A properly positioned cover helps keep the lighting area protected, accessible for service, and aligned with the surrounding fixture components. Although small, this hinge can matter during cabinet service because a loose, worn, bent, or damaged hinge may prevent the cover from sitting correctly or remaining in its intended position. This genuine Traulsen OEM part is identified by manufacturer part number 337-30858-00. Using the original part number helps service teams avoid ordering a similar-looking hinge with different mounting points, orientation, or cover engagement. Compare the original component carefully before ordering, especially where the hinge attaches to the cover and fixture. Review the equipment model and serial number when confirming the correct part for the unit being serviced. For foodservice equipment maintenance, a correctly identified light cover hinge helps restore orderly access to the lighting assembly without making unsupported assumptions about electrical ratings, lamp style, or model fitment.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This light cover hinge provides the mechanical connection that allows a lighting cover to open, close, pivot, or remain aligned with its fixture. Its role is to support the cover rather than control cabinet temperature, operate a motor, or regulate a heating circuit. When the hinge is in suitable condition and correctly mounted, the cover can sit in the intended position around the lighting area. If the hinge becomes bent, cracked, loose, or worn, the cover may not align correctly and related fixture components should be inspected. The verified Traulsen part number 337-30858-00 is the primary identification point for ordering this replacement hinge.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? The Traulsen OEM number 337-30858-00 provides a reliable reference when replacing this light cover hinge. Matching the original manufacturer part number helps distinguish this component from other hinges that may appear similar but differ in shape, pivot arrangement, mounting location, or cover relationship. An OEM-identified part also gives technicians and maintenance teams a clear number to compare against the original component and equipment documentation. Verify the part number, original hinge configuration, mounting points, and equipment model information before ordering.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A light cover hinge works as the pivot point between a cover and its associated lighting fixture area. One side of the hinge attaches at the cover or cover-support location, while the mating side aligns with the fixture-side mounting position. This arrangement lets the cover move during access or service and then return to its intended position. Proper hinge condition helps the cover remain aligned instead of hanging unevenly, shifting during use, or placing strain on nearby fixture pieces. The hinge itself is a mechanical part, but it is located near a lighting assembly. For that reason, cover alignment, socket condition, connectors, and switching components may deserve attention when a lighting-area concern is present. Do not assume that a lighting issue is caused by the hinge alone; inspect the related components appropriate to the equipment before replacing parts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before removing the original hinge, compare its pivot orientation, mounting locations, and the way the light cover engages with the fixture. Inspect the cover for damage and confirm that nearby fixture pieces are secure. Use appropriate electrical safety procedures before evaluating components near the lighting assembly.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA light cover may sit unevenly or fail to align with its intended fixture position.\u003c\/li\u003e\n  \u003cli\u003eThe cover may appear loose, displaced, or unable to remain in place.\u003c\/li\u003e\n  \u003cli\u003eVisible cracking, bending, corrosion, or wear at the hinge may indicate that replacement should be considered.\u003c\/li\u003e\n  \u003cli\u003eThe cover may bind, drag, or move inconsistently when opened or closed.\u003c\/li\u003e\n  \u003cli\u003eA cover may separate from its normal pivot location if the hinge or mounting area is damaged.\u003c\/li\u003e\n  \u003cli\u003eLoose mounting hardware near the hinge can indicate that the hinge and its attachment points should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA damaged cover can indicate that the hinge alignment and related fixture pieces should be evaluated.\u003c\/li\u003e\n  \u003cli\u003ePoor access to the lighting area may indicate that the cover hinge is not moving through its intended range.\u003c\/li\u003e\n  \u003cli\u003eLighting-area concerns may warrant inspection of the cover, socket, connector, and door switch in addition to the hinge.\u003c\/li\u003e\n  \u003cli\u003eRepeated cover misalignment can indicate that the hinge orientation or mating mounting surface should be inspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This Traulsen light cover hinge is intended for commercial foodservice equipment service where the verified manufacturer part number and original component arrangement correspond to the equipment being repaired. It may be relevant to maintenance teams supporting restaurant kitchens, institutional foodservice operations, commercial cold-storage areas, and other facilities using Traulsen equipment. The confirmed application is a lighting-cover hinge role; no specific equipment model, cabinet style, voltage, or fixture configuration is stated here. Service personnel should use the equipment data plate, original part, and applicable manufacturer documentation to confirm the correct application before installation.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Traulsen OEM part number 337-30858-00 to the original component or applicable equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the original hinge with the product image and product title before ordering.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the part being replaced is a light cover hinge rather than the cover, lens, socket, or another fixture component.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment model and serial number against applicable manufacturer documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare hinge orientation and pivot arrangement with the original component.\u003c\/li\u003e\n  \u003cli\u003eInspect the mounting locations and confirm that the attachment points correspond to the original hinge.\u003c\/li\u003e\n  \u003cli\u003eCheck the light cover for cracks, distortion, or damaged engagement points that could affect installation.\u003c\/li\u003e\n  \u003cli\u003eInspect nearby fixture pieces for looseness or damage before replacing the hinge.\u003c\/li\u003e\n  \u003cli\u003eConfirm SKU PD-120-264 when using PartsDirectOnline ordering records.\u003c\/li\u003e\n  \u003cli\u003eUse appropriate electrical safety procedures when servicing equipment near a lighting assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLight cover or lens: Inspect the cover for cracks, broken engagement points, or distortion that could prevent it from aligning correctly with the hinge.\u003c\/li\u003e\n  \u003cli\u003eLamp socket: Inspect the socket condition when servicing the lighting area, since a cover concern may occur near the lamp-support components.\u003c\/li\u003e\n  \u003cli\u003eWiring connector: Check the connector and visible wiring condition for secure attachment when evaluating a lighting-area concern.\u003c\/li\u003e\n  \u003cli\u003eDoor switch: Inspect the door switch where applicable, because it can be related to lighting operation even though it is separate from the hinge.\u003c\/li\u003e\n  \u003cli\u003eHinge mounting hardware: Inspect the mounting points and hardware for looseness or damage that may affect cover alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Traulsen part number 337-30858-00?\u003c\/h3\u003e\n\u003cp\u003eTraulsen part number 337-30858-00 is a light cover hinge used with a commercial equipment lighting assembly.\u003c\/p\u003e\n\n\u003ch3\u003eIs 337-30858-00 a genuine Traulsen OEM part?\u003c\/h3\u003e\n\u003cp\u003eYes. The available product identification lists 337-30858-00 as a verified Traulsen OEM part number.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I compare before ordering this light cover hinge?\u003c\/h3\u003e\n\u003cp\u003eCompare the OEM part number, original hinge orientation, pivot arrangement, mounting locations, light cover engagement points, and equipment model information.\u003c\/p\u003e\n\n\u003ch3\u003eWill a damaged light cover always mean the hinge is defective?\u003c\/h3\u003e\n\u003cp\u003eNo. A damaged or misaligned cover can indicate that the hinge, mounting points, cover, and related fixture pieces should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this hinge control the equipment lighting circuit?\u003c\/h3\u003e\n\u003cp\u003eNo. The hinge is a mechanical support component for the light cover. Electrical operation should be evaluated through the appropriate socket, connector, switch, and lighting components.\u003c\/p\u003e\n\n\u003ch3\u003eCan I confirm fitment by appearance alone?\u003c\/h3\u003e\n\u003cp\u003eNo. Similar-looking hinges can differ in mounting position, orientation, or cover relationship. Confirm Traulsen part number 337-30858-00 and compare the original component before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Traulsen 337-30858-00 Light Cover Hinge\",\"description\":\"Traulsen OEM 337-30858-00 light cover hinge for a commercial equipment lighting assembly. Compare the original component, mounting arrangement, and equipment information before ordering.\",\"sku\":\"PD-120-264\",\"mpn\":\"337-30858-00\",\"manufacturer\":{\"@type\":\"Brand\",\"name\":\"Traulsen\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"337-30858-00\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Light cover hinge\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Traulsen part number 337-30858-00?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Traulsen part number 337-30858-00 is a light cover hinge used with a commercial equipment lighting assembly.\"}},{\"@type\":\"Question\",\"name\":\"Is 337-30858-00 a genuine Traulsen OEM part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The available product identification lists 337-30858-00 as a verified Traulsen OEM part number.\"}},{\"@type\":\"Question\",\"name\":\"What should I compare before ordering this light cover hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the OEM part number, original hinge orientation, pivot arrangement, mounting locations, light cover engagement points, and equipment model information.\"}},{\"@type\":\"Question\",\"name\":\"Will a damaged light cover always mean the hinge is defective?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. A damaged or misaligned cover can indicate that the hinge, mounting points, cover, and related fixture pieces should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Does this hinge control the equipment lighting circuit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The hinge is a mechanical support component for the light cover. Electrical operation should be evaluated through the appropriate socket, connector, switch, and lighting components.\"}},{\"@type\":\"Question\",\"name\":\"Can I confirm fitment by appearance alone?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Similar-looking hinges can differ in mounting position, orientation, or cover relationship. Confirm Traulsen part number 337-30858-00 and compare the original component before ordering.\"}}]}\u003c\/script\u003e","brand":"Traulsen","offers":[{"title":"Default Title","offer_id":42500219994335,"sku":"PD-120-264","price":78.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/traulsen-light-cover-oem-replacement-9245325.jpg?v=1765853045"},{"product_id":"true-chrome-pull-handle-5-inch","title":"True Pull Handle — Chrome Plated | 5 Inch Long | 4-3\/16 Inch Hole Centers | OEM Replacement","description":"\u003ch2\u003eTrue Pull Handle — Chrome Plated | 5\" Long | 4-3\/16\" Hole Centers | OEM Replacement\u003c\/h2\u003e\u003ch4\u003eHow do I confirm this is the correct hinge?\u003c\/h4\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":42500223041759,"sku":"996771","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/true-pull-handle-chrome-plated-5-long-4-316-hole-centers-oem-replacement-7781802.jpg?v=1765853107"},{"product_id":"brackets-tilt-lid-hinge","title":"True Bain Marie Cover Brackets — Stainless Steel | Sold as Pair w\/ Screws | OEM Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e True Manufacturing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 959410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 959410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 959410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe True 959410 Bain Marie cover bracket hinge is a stainless steel door-hardware component supplied as a pair with screws. It provides the pivoting support needed for the associated cover assembly to open, close, and remain properly positioned during normal foodservice use. Although small hardware can be easy to overlook, hinge condition has a direct effect on how smoothly the cover moves and whether the assembly sits in its intended position when closed. This Genuine True OEM part gives technicians and operators a reliable way to replace worn, loose, bent, or missing cover-hinge hardware with the original manufacturer part number. A matched pair is useful when both sides of the cover assembly need attention or when hardware wear has affected alignment. Correct bracket placement and secure mounting help maintain consistent cover movement, reduce unnecessary strain on adjoining hardware, and support a cleaner, more dependable service repair. Compare the original component, mounting arrangement, and door assembly condition before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis hinge bracket pair supports the mechanical movement of a True Bain Marie cover assembly. The brackets create the pivot points that allow the cover to move through its normal opening and closing travel while keeping the assembly aligned with its mounting location. Supplied screws provide the hardware needed to secure the brackets at the intended mounting points. When the brackets and fasteners are in sound condition, the cover can operate with less looseness, uneven movement, or misalignment. Because this is an OEM-identified mechanical component, matching part number 959410 helps reduce the risk of selecting hardware with the wrong configuration.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eTrue OEM part 959410 is identified for this Bain Marie cover bracket hinge application and is supplied as a stainless steel pair with screws. Using the original manufacturer part number helps a service technician compare the replacement with the removed hardware, including the bracket arrangement and mounting locations. That direct identification is especially helpful when cover hardware has worn gradually or when one damaged bracket has affected the position of the complete assembly. Matching the True OEM number before purchase supports a more confident repair and helps avoid a wrong-order delay.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eEach bracket functions as part of the cover assembly's mechanical pivot. Once mounted in its intended position, the hinge hardware supports the cover as it moves between open and closed positions. The paired arrangement helps keep the cover supported across its normal travel rather than relying on a single worn or damaged mounting point. Properly secured screws hold the brackets in place so the pivot relationship remains stable during repeated use. If a bracket becomes loose, bent, worn, or damaged, the cover may no longer move evenly or rest in the intended position. That condition can place added stress on the opposite bracket, screws, latch hardware, or adjacent cover components. Replacing worn hinge hardware and inspecting the surrounding door assembly helps address mechanical movement concerns before they become a larger cover-alignment repair.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing the original hardware, compare the bracket orientation, mounting locations, screw condition, and cover alignment. Inspect the paired hinge position as well; uneven wear on one side can affect the movement of the complete cover assembly.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA cover that moves loosely may indicate worn hinge brackets or loose mounting screws.\u003c\/li\u003e\n  \u003cli\u003eUneven opening or closing can indicate that the paired brackets should be inspected for alignment or damage.\u003c\/li\u003e\n  \u003cli\u003eA cover that does not rest squarely in its intended position may indicate hinge-hardware wear.\u003c\/li\u003e\n  \u003cli\u003eVisible bending, cracking, corrosion, or deformation on a bracket should be inspected promptly.\u003c\/li\u003e\n  \u003cli\u003eMissing or damaged screws can indicate that the hinge mounting requires attention.\u003c\/li\u003e\n  \u003cli\u003eExcessive side-to-side cover movement may indicate loose hardware or worn pivot support.\u003c\/li\u003e\n  \u003cli\u003eA cover that rubs against adjacent hardware may indicate a bracket alignment concern.\u003c\/li\u003e\n  \u003cli\u003eRepeated difficulty opening or closing the cover can indicate that the hinge brackets, fasteners, and related hardware should be inspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis True 959410 hinge bracket pair is used for commercial refrigeration service and foodservice cabinet maintenance where a verified True Bain Marie cover assembly requires this OEM hardware. It is appropriate for service calls involving cover movement, bracket damage, loose mounting hardware, or cover alignment concerns. Restaurant maintenance teams, refrigeration service companies, institutional foodservice operations, and equipment repair professionals can use the manufacturer part number to identify the correct replacement hardware. Application should be confirmed against the equipment data plate, original component, and verified True parts information before purchase.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch True OEM part number 959410 to the part required for the repair.\u003c\/li\u003e\n  \u003cli\u003eCompare the original bracket shape and orientation with the replacement image and product details.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the repair calls for a pair of stainless steel cover brackets with screws.\u003c\/li\u003e\n  \u003cli\u003eInspect both mounting locations for damage, looseness, or distorted metal.\u003c\/li\u003e\n  \u003cli\u003eCompare the screw locations and mounting-hole arrangement on the original component.\u003c\/li\u003e\n  \u003cli\u003eCheck whether the opposite hinge bracket shows wear that could affect cover alignment.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment data plate, including equipment model and serial number, before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect related cover hardware, including the gasket, latch, closer, and hinge fasteners, for conditions that may affect operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect gasket condition and compression because a poorly seated cover or door assembly can affect how adjoining sealing surfaces meet.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Inspect fasteners and pivot hardware for looseness, wear, or damage that can allow the cover to move out of alignment.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect the latch for wear or misalignment when the cover does not close or remain positioned as expected.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Inspect the closer and its mounting condition if the cover movement is uneven or does not return smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is True part number 959410?\u003c\/h3\u003e\n\u003cp\u003eTrue 959410 is a stainless steel Bain Marie cover bracket hinge supplied as a pair with screws.\u003c\/p\u003e\n\n\u003ch3\u003eIs True 959410 a Genuine OEM part?\u003c\/h3\u003e\n\u003cp\u003eYes. Part number 959410 is identified as a Genuine True OEM replacement component.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this hinge bracket pair do?\u003c\/h3\u003e\n\u003cp\u003eThe pair provides mechanical pivot support for the associated Bain Marie cover assembly, helping the cover open, close, and remain aligned.\u003c\/p\u003e\n\n\u003ch3\u003eAre screws included with True 959410?\u003c\/h3\u003e\n\u003cp\u003eYes. This True 959410 cover bracket hinge is supplied as a pair with screws.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I inspect before replacing the cover brackets?\u003c\/h3\u003e\n\u003cp\u003eCompare the original brackets, orientation, mounting locations, and screw arrangement. Inspect the paired hinge position, gasket, latch, closer, and related fasteners for wear or alignment concerns.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I confirm this bracket pair is correct for my equipment?\u003c\/h3\u003e\n\u003cp\u003eMatch True OEM part number 959410, compare the original component with the product details, and confirm the equipment model and serial number against verified True parts information.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"True Bain Marie Cover Brackets — Stainless Steel | Sold as Pair w\/ Screws | OEM Replacement\",\"description\":\"True Manufacturing 959410 Hinge. True 959410 stainless steel Bain Marie cover bracket hinge pair with screws for specified True commercial refrigeration\",\"brand\":{\"@type\":\"Brand\",\"name\":\"True Manufacturing\"},\"mpn\":\"959410\",\"sku\":\"959410\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is True part number 959410?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"True 959410 is a stainless steel Bain Marie cover bracket hinge supplied as a pair with screws.\"}},{\"@type\":\"Question\",\"name\":\"Is True 959410 a Genuine OEM part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Part number 959410 is identified as a Genuine True OEM replacement component.\"}},{\"@type\":\"Question\",\"name\":\"What does this hinge bracket pair do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The pair provides mechanical pivot support for the associated Bain Marie cover assembly, helping the cover open, close, and remain aligned.\"}},{\"@type\":\"Question\",\"name\":\"Are screws included with True 959410?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. This True 959410 cover bracket hinge is supplied as a pair with screws.\"}},{\"@type\":\"Question\",\"name\":\"What should I inspect before replacing the cover brackets?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the original brackets, orientation, mounting locations, and screw arrangement. Inspect the paired hinge position, gasket, latch, closer, and related fasteners for wear or alignment concerns.\"}},{\"@type\":\"Question\",\"name\":\"How can I confirm this bracket pair is correct for my equipment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match True OEM part number 959410, compare the original component with the product details, and confirm the equipment model and serial number against verified True parts information.\"}}]}\u003c\/script\u003e","brand":"True Manufacturing","offers":[{"title":"Default Title","offer_id":42500223434975,"sku":"959410","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/true-bain-marie-cover-brackets-stainless-steel-sold-as-pair-w-screws-oem-replacement-7104911.jpg?v=1765853167"},{"product_id":"true-884605-cord-guide-pulley-kit","title":"True 884605 Cord Pulley Kit for Sliding Glass Doors","description":"\u003ch2\u003eTrue 884605 Cord Guide Pulley Kit for Commercial Sliding Glass Door Self-Closing Systems\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTrue 884605 Cord Guide Pulley Kit\u003c\/strong\u003e is used in the self-closing mechanism of select True® commercial sliding glass refrigerators, beverage merchandisers, display coolers, and back bar refrigeration equipment. This assembly guides the door cords through the pulley system, allowing the sliding glass doors to operate smoothly and return to the closed position after each use.\u003c\/p\u003e\n\n\u003cp\u003eCommercial refrigeration doors can cycle hundreds or even thousands of times each week. Over time, pulleys, cords, and related hardware naturally wear, which can cause rough door movement, slow closing, or doors that no longer fully return to the closed position. Replacing worn pulley components helps restore smooth operation while supporting proper cabinet temperatures and overall refrigeration efficiency.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhat Does the True 884605 Cord Guide Pulley Kit Do?\u003c\/h2\u003e\n\n\u003cp\u003eThe pulley kit is a key component of the sliding door closing system. It guides the door cords through the proper path while allowing the self-closing mechanism to function smoothly and consistently.\u003c\/p\u003e\n\n\u003cp\u003eWhen operating correctly, the pulley system helps:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSupport smooth sliding door operation\u003c\/li\u003e\n\u003cli\u003eAssist proper self-closing performance\u003c\/li\u003e\n\u003cli\u003eReduce unnecessary wear on door cords\u003c\/li\u003e\n\u003cli\u003eHelp maintain consistent refrigerated cabinet temperatures\u003c\/li\u003e\n\u003cli\u003eReduce warm air infiltration\u003c\/li\u003e\n\u003cli\u003eSupport overall refrigeration efficiency\u003c\/li\u003e\n\u003cli\u003eReduce unnecessary compressor run time caused by doors remaining partially open\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eCommon Symptoms of a Worn Cord Guide Pulley Kit\u003c\/h2\u003e\n\n\u003cp\u003eIf the pulley assembly begins to wear, technicians commonly observe one or more of the following conditions:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSliding glass doors no longer return completely to the closed position\u003c\/li\u003e\n\u003cli\u003eDoor cords appear frayed, stretched, or damaged\u003c\/li\u003e\n\u003cli\u003eDoor movement feels rough or inconsistent\u003c\/li\u003e\n\u003cli\u003ePulleys bind, squeak, or fail to rotate smoothly\u003c\/li\u003e\n\u003cli\u003eDoors hesitate while opening or closing\u003c\/li\u003e\n\u003cli\u003eDoors remain partially open after use\u003c\/li\u003e\n\u003cli\u003eCabinet temperatures become less consistent due to warm air entering through an open door\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese symptoms may also result from worn rollers, damaged tracks, improper door alignment, or other components within the sliding door assembly. A complete inspection is recommended before replacing parts.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhy This Part Matters\u003c\/h2\u003e\n\n\u003cp\u003eThe sliding glass door system directly impacts refrigeration performance. When doors fail to close completely, warm humid air enters the cabinet, forcing the refrigeration system to work harder to maintain operating temperatures. Over time this can increase energy consumption, place additional demand on refrigeration components, and reduce overall equipment efficiency.\u003c\/p\u003e\n\n\u003cp\u003eReplacing worn door hardware before complete failure helps maintain reliable daily operation while reducing unnecessary wear throughout the door closing system.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eTypical Commercial Equipment Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe True 884605 Cord Guide Pulley Kit is used on select commercial refrigeration equipment, including certain:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eGlass Door Merchandisers\u003c\/li\u003e\n\u003cli\u003eReach-In Refrigerators\u003c\/li\u003e\n\u003cli\u003eReach-In Freezers\u003c\/li\u003e\n\u003cli\u003eBeverage Coolers\u003c\/li\u003e\n\u003cli\u003eDisplay Refrigerators\u003c\/li\u003e\n\u003cli\u003eBack Bar Refrigerators\u003c\/li\u003e\n\u003cli\u003eConvenience Store Refrigeration Equipment\u003c\/li\u003e\n\u003cli\u003eRestaurant Refrigeration Equipment\u003c\/li\u003e\n\u003cli\u003eInstitutional Foodservice Refrigeration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eAlways verify the complete equipment model number, serial number, and OEM part number before ordering. Production changes may affect compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eVerify OEM Part Number: \u003cstrong\u003e884605\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfirm the complete equipment model number.\u003c\/li\u003e\n\u003cli\u003eConfirm the complete equipment serial number.\u003c\/li\u003e\n\u003cli\u003eCompare the existing pulley configuration with your current assembly.\u003c\/li\u003e\n\u003cli\u003eInspect the complete sliding door closing system for additional worn components.\u003c\/li\u003e\n\u003cli\u003eDetermine whether multiple kits are required for your equipment configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOrdering commercial refrigeration parts using only the equipment model can result in the wrong replacement due to production changes.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eProfessional Installation Tips\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eDisconnect power before servicing the equipment.\u003c\/li\u003e\n\u003cli\u003eInspect the complete sliding door assembly during repair.\u003c\/li\u003e\n\u003cli\u003eCheck the condition of the door cords before reassembly.\u003c\/li\u003e\n\u003cli\u003eInspect rollers and door tracks for excessive wear.\u003c\/li\u003e\n\u003cli\u003eVerify proper cord routing during installation.\u003c\/li\u003e\n\u003cli\u003eCycle each door several times to confirm smooth operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eReplacing only one worn component may not completely restore proper operation if additional door hardware has also reached the end of its service life.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does the True 884605 Cord Guide Pulley Kit do?\u003c\/h3\u003e\n\n\u003cp\u003eIt guides the door cords within the sliding glass door self-closing mechanism, helping the doors move smoothly and return to the closed position.\u003c\/p\u003e\n\n\u003ch3\u003eWhat causes pulley assemblies to fail?\u003c\/h3\u003e\n\n\u003cp\u003eNormal wear from repeated daily operation, damaged cords, improper door alignment, debris within the track system, and general mechanical wear are common causes.\u003c\/p\u003e\n\n\u003ch3\u003eCan worn pulleys affect refrigeration performance?\u003c\/h3\u003e\n\n\u003cp\u003eYes. Doors that fail to close completely allow warm air into the cabinet, forcing the refrigeration system to run longer while making it more difficult to maintain proper cabinet temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect additional door components during replacement?\u003c\/h3\u003e\n\n\u003cp\u003eYes. Door rollers, tracks, cords, guides, mounting hardware, and related door components should be inspected whenever servicing the sliding door system.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I verify this is the correct replacement part?\u003c\/h3\u003e\n\n\u003cp\u003eUse the complete equipment model number, serial number, and OEM part number before ordering. If you're uncertain, contact us with your equipment information for assistance.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhy Buy From Parts Direct Online?\u003c\/h2\u003e\n\n\u003cp\u003eParts Direct Online specializes in replacement parts for commercial refrigeration and foodservice equipment. We provide detailed product information, technician-focused buying guidance, and dependable support to help restaurants, grocery stores, convenience stores, schools, healthcare facilities, and service companies identify the correct replacement parts with confidence.\u003c\/p\u003e","brand":"True Manufacturing","offers":[{"title":"Default Title","offer_id":42500223631583,"sku":"884605","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/true-cord-guide-pulley-kit-sliding-glass-door-self-closing-system-oem-replacement-6778094.jpg?v=1765852927"},{"product_id":"lock","title":"TRUE Sliding Door Lock Assembly — OEM Replacement | Commercial Cooler \u0026 Freezer Models","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e True Manufacturing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 872801\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 872801\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 872801\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details Manufacturer: True Manufacturing OEM Number: 872801 MPN: 872801 Part Type: Hinge OEM Status: VERIFIED Product Overview True Manufacturing 872801 is an OEM door hardware hinge used in commercial refrigeration service. A hinge carries the door assembly through its opening and closing movement while helping the door remain positioned correctly against the cabinet opening. That mechanical relationship matters because a door that hangs unevenly, drags, binds, or fails to close consistently can affect gasket contact and day-to-day cabinet operation. For technicians and foodservice maintenance teams, a worn or damaged hinge should be evaluated as part of the complete door assembly rather than as an isolated piece of hardware. Door alignment, gasket compression, latch engagement, mounting condition, and the condition of related hardware can all influence how the door closes. Using the verified True OEM number 872801 gives the service professional a dependable identification point when comparing the original component before ordering. This hinge is intended for commercial equipment service where accurate door operation and orderly repairs are important. Review the original part, its mounting arrangement, and the equipment data plate before purchase to help prevent an incorrect door hardware order.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function The True 872801 hinge provides a mechanical pivot and support point for the door assembly. Its job is to allow controlled door movement while helping maintain the door's position relative to the cabinet opening. When the hinge and associated mounting hardware are in sound condition, the door can move through its intended travel without excessive looseness, binding, or sagging. Because door position influences gasket contact and closure reliability, hinge condition deserves attention during commercial refrigeration service. The hinge should be compared carefully with the removed component, including its orientation, mounting points, and relationship to the rest of the door hardware.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? True OEM part number 872801 provides a verified identification reference for this hinge. Matching the original True part number helps keep the order focused on the correct manufacturer-identified door hardware component and reduces uncertainty when servicing an existing door assembly. Compare the removed part and its mounting arrangement before ordering, especially when other door hardware shows wear or the door has alignment concerns.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A door hinge supports the door assembly at its attachment points and provides the pivoting action needed for opening and closing. The hinge works with the door, mounting hardware, gasket, latch, and other related parts to establish the door's resting position at the cabinet opening. If the hinge is loose, worn, bent, damaged, or incorrectly positioned, the door may not travel smoothly or settle in the intended location. In commercial refrigeration equipment, correct door movement is important because the gasket depends on consistent contact around the opening. The hinge itself does not control cabinet temperature, but poor door alignment can contribute to reduced gasket compression and inconsistent closure. Inspecting the complete door assembly helps identify whether the hinge is the only component requiring attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before removing the original hinge, compare the door position, mounting points, and hardware condition. Inspect the door gasket and related fastening hardware for wear or damage that could continue to affect closure after hinge service.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor movement that feels loose or uneven may indicate hinge wear or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eA door that appears to sit lower or higher than expected should be inspected for hinge condition and alignment.\u003c\/li\u003e\n  \u003cli\u003eBinding, dragging, or resistance during door movement can indicate a damaged hinge or an alignment concern.\u003c\/li\u003e\n  \u003cli\u003eA door that does not return to a consistent closed position may indicate wear in the hinge or related door hardware.\u003c\/li\u003e\n  \u003cli\u003eVisible corrosion, bending, cracking, or deformation at the hinge should be inspected.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware that repeatedly loosens may indicate wear at the hinge attachment area.\u003c\/li\u003e\n  \u003cli\u003eUneven gasket contact around the cabinet opening can indicate that door alignment and hinge condition should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eA door that requires unusual force to open or close may indicate a hinge, latch, gasket, or alignment concern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This True OEM hinge is used for commercial refrigeration service involving door hardware maintenance. It is relevant to restaurant cold-storage operations, foodservice maintenance teams, and commercial refrigeration technicians working on True door assemblies. The verified part number identifies the component; it does not by itself establish fitment for every cabinet or door configuration. When a door has poor alignment, inconsistent closure, or visible hardware wear, the hinge should be assessed alongside the gasket, latch, door closer, and fastening hardware. Confirm the equipment data plate, serial number, original component, and mounting arrangement before ordering for a specific service application.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch True OEM part number 872801 to the original component whenever possible.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed hinge with the product image and part identification.\u003c\/li\u003e\n  \u003cli\u003eConfirm the manufacturer is True Manufacturing.\u003c\/li\u003e\n  \u003cli\u003eCheck the equipment data plate and serial number before placing the order.\u003c\/li\u003e\n  \u003cli\u003eCompare the hinge orientation and mounting-point arrangement with the original part.\u003c\/li\u003e\n  \u003cli\u003eInspect the existing door hardware for damage, wear, or missing fasteners.\u003c\/li\u003e\n  \u003cli\u003eReview the door position and alignment before deciding that the hinge is the only part requiring service.\u003c\/li\u003e\n  \u003cli\u003eInspect gasket compression and door closure because related wear can affect door operation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the part type needed is a hinge rather than another door hardware component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect gasket condition and compression because uneven door position can affect contact at the cabinet opening.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check associated fastening hardware for looseness, wear, corrosion, or damage that can affect hinge support.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect latch engagement because closure concerns may involve both the hinge position and the latch assembly.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer where present, since it can affect how the door returns to its closed position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is True part number 872801?\u003c\/h3\u003e\n\u003cp\u003eTrue part number 872801 is a verified OEM hinge for commercial refrigeration door hardware service.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a door hinge do on commercial refrigeration equipment?\u003c\/h3\u003e\n\u003cp\u003eA door hinge supports the door assembly and provides the pivoting movement needed for opening and closing. Its condition can influence door alignment and gasket contact.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the door gasket when replacing this hinge?\u003c\/h3\u003e\n\u003cp\u003eYes. Inspect the door gasket for wear and uneven compression because gasket condition and door alignment both affect closure at the cabinet opening.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I compare before ordering True 872801?\u003c\/h3\u003e\n\u003cp\u003eCompare the original hinge, True OEM number 872801, mounting arrangement, orientation, equipment data plate, and serial number before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge affect door closure?\u003c\/h3\u003e\n\u003cp\u003eYes. A loose, worn, bent, or damaged hinge may affect door position and can contribute to inconsistent closure or uneven gasket contact.\u003c\/p\u003e\n\n\u003ch3\u003eAre latch and hinge problems related?\u003c\/h3\u003e\n\u003cp\u003eThey can be related. A door that is out of position may not engage the latch as intended, so inspect the hinge, latch, gasket, and related fastening hardware together.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"TRUE Sliding Door Lock Assembly — OEM Replacement | Commercial Cooler \u0026 Freezer Models\",\"description\":\"True Manufacturing 872801 OEM door hinge for commercial refrigeration door hardware service. Compare the original part before ordering.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"True Manufacturing\"},\"mpn\":\"872801\",\"sku\":\"872801\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is True part number 872801?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"True part number 872801 is a verified OEM hinge for commercial refrigeration door hardware service.\"}},{\"@type\":\"Question\",\"name\":\"What does a door hinge do on commercial refrigeration equipment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A door hinge supports the door assembly and provides the pivoting movement needed for opening and closing. Its condition can influence door alignment and gasket contact.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the door gasket when replacing this hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Inspect the door gasket for wear and uneven compression because gasket condition and door alignment both affect closure at the cabinet opening.\"}},{\"@type\":\"Question\",\"name\":\"What should I compare before ordering True 872801?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the original hinge, True OEM number 872801, mounting arrangement, orientation, equipment data plate, and serial number before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge affect door closure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A loose, worn, bent, or damaged hinge may affect door position and can contribute to inconsistent closure or uneven gasket contact.\"}},{\"@type\":\"Question\",\"name\":\"Are latch and hinge problems related?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They can be related. A door that is out of position may not engage the latch as intended, so inspect the hinge, latch, gasket, and related fastening hardware together.\"}}]}\u003c\/script\u003e","brand":"True Manufacturing","offers":[{"title":"Default Title","offer_id":42500223926495,"sku":"872801","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/true-sliding-door-lock-assembly-oem-replacement-commercial-cooler-freezer-models-9778637.jpg?v=1765853106"},{"product_id":"left-hand-hinge-assembly","title":"Glastender hinge assembly set with top and bottom hinges","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Glastender\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e PD-758-027\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PD-758-027\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-758-027\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Glastender PD-758-027 hinge assembly set provides the top and bottom hinge support used to keep an equipment door positioned correctly during normal opening and closing. As a door hardware component, it helps maintain dependable door movement, alignment, and closure at the cabinet opening. A worn, loose, bent, or damaged hinge can allow the door to sag, bind, sit unevenly, or fail to close as intended. In commercial refrigeration equipment, proper door alignment also supports consistent gasket contact around the door opening, which is important when maintaining a properly closed cabinet. This Glastender assembly is identified by manufacturer part number PD-758-027 and is supplied as a hinge assembly set with top and bottom hinges. It is a practical replacement choice when the removed door hardware shows wear or damage and the original component matches the identified part. Before ordering, compare the original hinge assembly carefully, including its orientation, mounting locations, and visible hardware arrangement. Confirming these details helps avoid a wrong-part order and supports efficient commercial equipment service.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis hinge assembly set supports and guides the movement of a door through its normal swing. The top and bottom hinges work together to hold the door in position while allowing it to open and close at the cabinet opening. Correct hinge condition is important because door alignment affects how the door meets the frame, latch area, and gasket surface. When hinge hardware is worn, loose, bent, or damaged, the door may not remain level or close smoothly. Replacing the correct Glastender hinge assembly can restore secure mechanical support where the original assembly has deteriorated. This component should be selected by matching Glastender part number PD-758-027 and comparing the removed hinge assembly with the product image and equipment data plate information.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eGlastender part number PD-758-027 provides a reliable manufacturer part-number reference for identifying this hinge assembly set. Using the verified OEM number helps service personnel and equipment owners compare the replacement against the original component before purchase. Accurate identification is especially important for door hardware because hinge orientation, mounting arrangement, and the relationship between the top and bottom pieces can affect whether the assembly is appropriate for the door. Matching the original Glastender component to PD-758-027 helps reduce wrong-part orders and supports confident commercial equipment service.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA door hinge creates the controlled pivot point that allows the door to swing while remaining supported at the cabinet opening. This Glastender set includes top and bottom hinge components, which share the mechanical load of the door and help keep it positioned through repeated use. When the hinge assembly is secure and aligned, the door can travel through its normal opening and closing path without excessive play, rubbing, or binding. The hinge assembly also affects the door's relationship to nearby hardware. If the door shifts because of hinge wear or damage, the gasket may not meet the cabinet evenly, and the latch or door closer may not engage as intended. The hinge itself does not control temperature, airflow, or refrigeration operation; its role is mechanical door support and alignment. For that reason, hinge condition should be evaluated alongside the door gasket, latch, closer, and mounting hardware whenever door operation is irregular.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing door hardware, compare the removed top and bottom hinge pieces with the replacement assembly. Check orientation, mounting-hole positions, hinge location, visible wear, and the condition of the mounting hardware. Inspect the door gasket and latch area as well, since a door that sits unevenly can create symptoms that appear to be caused by more than one component.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor sagging or sitting lower on one side may indicate worn, loose, or damaged hinge hardware.\u003c\/li\u003e\n  \u003cli\u003eA door that rubs the frame during movement can indicate that the hinge assembly should be inspected.\u003c\/li\u003e\n  \u003cli\u003eExcessive side-to-side door movement may indicate hinge wear or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eDifficulty opening or closing the door can indicate binding at the hinge area.\u003c\/li\u003e\n  \u003cli\u003eA door that does not sit evenly at the cabinet opening may indicate a hinge alignment concern.\u003c\/li\u003e\n  \u003cli\u003eUneven gasket contact around the door opening can indicate that the door hardware should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA latch that does not line up consistently with its strike can indicate a door-position issue related to the hinges.\u003c\/li\u003e\n  \u003cli\u003eVisible bending, cracking, corrosion, or damaged pivot areas can indicate that hinge replacement is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Glastender hinge assembly set is used for commercial equipment service where door hardware requires replacement or inspection. It is relevant to restaurant service operations, foodservice maintenance teams, and commercial refrigeration repair work involving doors that need dependable support and alignment. Door hardware receives repeated use in busy facilities, so hinge wear can become a practical service concern when doors begin to sag, bind, rub, or close unevenly. The verified PD-758-027 manufacturer part number is the key identification reference for this Glastender hinge assembly set. Because equipment fitment details are not supplied here, compare the original component and confirm the equipment data plate and serial number before purchase. This ordering step is particularly useful when servicing equipment with similar-looking door hardware.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the Glastender manufacturer part number PD-758-027 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the required part is a hinge assembly set with both top and bottom hinge components.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement image with the removed hinge assembly before ordering.\u003c\/li\u003e\n  \u003cli\u003eCheck the hinge orientation and placement on the door assembly.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting-hole locations and the visible hardware arrangement.\u003c\/li\u003e\n  \u003cli\u003eInspect the original hinge for wear, bending, corrosion, cracking, or pivot damage.\u003c\/li\u003e\n  \u003cli\u003eConfirm equipment identification from the data plate and serial number.\u003c\/li\u003e\n  \u003cli\u003eInspect the door gasket, latch, closer, and hinge screws or pins for related wear or alignment concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for uneven compression or gaps that may result when the door is not positioned evenly at the cabinet opening.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check the associated fasteners and pivot hardware for looseness, wear, damage, or corrosion before replacing the hinge assembly.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect the latch and strike relationship if the door does not close or engage consistently after hinge wear is observed.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer for smooth operation and proper door movement, since it works with correctly aligned door hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Glastender part number PD-758-027?\u003c\/h3\u003e\n\u003cp\u003ePD-758-027 is a Glastender hinge assembly set identified as including top and bottom hinges.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this hinge assembly do?\u003c\/h3\u003e\n\u003cp\u003eThe assembly supports door movement and helps maintain door alignment as the door opens and closes.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge affect door closure?\u003c\/h3\u003e\n\u003cp\u003eYes. A worn, loose, bent, or damaged hinge may allow the door to sag, bind, sit unevenly, or fail to close as intended.\u003c\/p\u003e\n\n\u003ch3\u003eShould the door gasket be inspected with this hinge assembly?\u003c\/h3\u003e\n\u003cp\u003eYes. Inspect the door gasket for uneven compression or gaps because door alignment can affect how the gasket meets the cabinet opening.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should be compared before ordering PD-758-027?\u003c\/h3\u003e\n\u003cp\u003eMatch Glastender part number PD-758-027, compare the removed top and bottom hinge pieces, check orientation and mounting locations, and confirm the equipment data plate and serial number.\u003c\/p\u003e\n\n\u003ch3\u003eShould the door latch be checked when replacing a hinge?\u003c\/h3\u003e\n\u003cp\u003eThe latch and strike should be inspected when door alignment is affected, since a shifted door can change how the latch engages.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Glastender PD-758-027 Hinge Assembly Set\",\"description\":\"Glastender PD-758-027 hinge assembly set with top and bottom hinges for door support and alignment. Compare the original component before ordering.\",\"sku\":\"PD-758-027\",\"mpn\":\"PD-758-027\",\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Glastender\"},\"brand\":{\"@type\":\"Brand\",\"name\":\"Glastender\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"PD-758-027\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Glastender part number PD-758-027?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"PD-758-027 is a Glastender hinge assembly set identified as including top and bottom hinges.\"}},{\"@type\":\"Question\",\"name\":\"What does this hinge assembly do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The assembly supports door movement and helps maintain door alignment as the door opens and closes.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge affect door closure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A worn, loose, bent, or damaged hinge may allow the door to sag, bind, sit unevenly, or fail to close as intended.\"}},{\"@type\":\"Question\",\"name\":\"Should the door gasket be inspected with this hinge assembly?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Inspect the door gasket for uneven compression or gaps because door alignment can affect how the gasket meets the cabinet opening.\"}},{\"@type\":\"Question\",\"name\":\"What should be compared before ordering PD-758-027?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Glastender part number PD-758-027, compare the removed top and bottom hinge pieces, check orientation and mounting locations, and confirm the equipment data plate and serial number.\"}},{\"@type\":\"Question\",\"name\":\"Should the door latch be checked when replacing a hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The latch and strike should be inspected when door alignment is affected, since a shifted door can change how the latch engages.\"}}]}\u003c\/script\u003e","brand":"Glastender","offers":[{"title":"Right Hinge Assembly","offer_id":42758165627103,"sku":"PD-758-027","price":163.0,"currency_code":"USD","in_stock":true},{"title":"Left Hinge Assembly","offer_id":42758272483551,"sku":"PD-758-026","price":163.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/glastender-hinge-assembly-set-top-bottom-left-or-right-oem-replacement-fits-bb-ds-fv-kc-lp-nd-pt-series-models-1195202.jpg?v=1765853045"},{"product_id":"traulsen-push-in-door-gasket","title":"Traulsen Magnetic Gasket — Push-In Style | Cooler \u0026 Freezer Door | 3 or 4-Sided","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Traulsen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 341-38232-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 341-38232-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-120-254\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eTraulsen 341-38232-00 is a magnetic push-in door gasket used to help create a reliable seal around commercial cooler and freezer doors. This gasket supports the door assembly by reducing cabinet air leakage when the door is closed. A sound door seal matters because unwanted warm-air entry can contribute to moisture around the opening, frost accumulation, and added demand on the refrigeration system. The gasket uses a push-in mounting style and magnetic sealing action. Its profile must match the original component and the door channel for the replacement to seat correctly. This is a 3- or 4-sided door gasket configuration, so the original gasket should be compared carefully before ordering. As a wear-related door component, the gasket should be inspected when it becomes torn, hardened, distorted, loose in the channel, or unable to maintain consistent compression against the cabinet face. Using the verified Traulsen OEM number 341-38232-00 helps identify the correct replacement component for applicable equipment. Proper identification also helps avoid ordering a gasket with the wrong profile, mounting style, or door arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Traulsen door gasket helps seal the space between the door and cabinet opening on commercial refrigeration equipment. The magnetic portion helps hold the gasket against the cabinet surface when the door closes, while the push-in section anchors the gasket in the door channel. Together, these features support consistent door closure and help limit air movement through the door perimeter. A gasket in good condition supports cabinet service by helping preserve the intended door seal. When the seal is compromised, the door assembly, hinges, latch, and gasket channel should all be evaluated because alignment or mounting issues can affect gasket compression.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eThis Traulsen OEM door gasket is identified by manufacturer part number 341-38232-00. Matching the verified OEM number helps ensure the replacement is selected by the original part identification rather than by appearance alone. Door gaskets can look similar while using different mounting profiles, magnetic arrangements, or door configurations. Using the correct Traulsen part number provides a clear reference when comparing the original component before purchase.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eWhen the door closes, the magnetic section of the gasket is drawn toward the cabinet face and the flexible gasket material compresses around the door perimeter. That contact helps form a barrier between the refrigerated cabinet space and the surrounding room air. The push-in mounting section holds the gasket in its door channel so the sealing edge can remain positioned correctly during normal door use. Gasket performance depends on more than the gasket itself. A clean, secure channel helps retain the mounting section, while properly aligned hinges and latching hardware help the door close squarely against the cabinet. If the door is sagging, not closing evenly, or has a damaged sealing surface, a replacement gasket alone may not correct the condition. Inspecting the complete door assembly helps identify conditions that may affect the new gasket's compression.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing a door gasket, compare the original gasket profile, push-in mounting section, corner arrangement, and overall door configuration with the replacement. Inspect the door channel for debris or damage and evaluate hinge and latch condition if the door does not close evenly.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTears, splits, or missing sections of the gasket may indicate that replacement is needed.\u003c\/li\u003e\n  \u003cli\u003eA door that does not seal evenly around its perimeter may indicate gasket compression loss or door alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eVisible gaps between the door gasket and cabinet face should be inspected.\u003c\/li\u003e\n  \u003cli\u003eMoisture near the door opening can indicate air leakage through a damaged or poorly seated gasket.\u003c\/li\u003e\n  \u003cli\u003eFrost near the door frame may indicate that the door seal should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eA gasket that feels hardened, flattened, or permanently distorted may no longer provide consistent compression.\u003c\/li\u003e\n  \u003cli\u003eA gasket pulling out of the door channel can indicate wear or damage at the push-in mounting section or channel.\u003c\/li\u003e\n  \u003cli\u003eA door that must be pushed firmly to remain closed may indicate that the gasket, hinges, latch, or cabinet contact surface should be inspected.\u003c\/li\u003e\n  \u003cli\u003eUneven magnetic contact around the door may indicate a gasket profile, mounting, or door alignment concern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Traulsen magnetic door gasket is used in commercial refrigeration door service where the verified 341-38232-00 part number applies. Commercial refrigeration environments can include restaurant kitchens, institutional foodservice operations, commercial cold storage areas, and equipment service departments responsible for cooler and freezer cabinets. Door gaskets are routine wear components in high-use cabinet service because frequent door openings, cleaning, impacts, and long-term compression can affect the seal. Equipment-specific fitment is not stated here. Confirm the original Traulsen part number, door arrangement, and equipment identification before ordering. A correct gasket selection helps service teams address door-sealing concerns without relying on visual similarity alone.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Traulsen OEM part number 341-38232-00 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the original gasket profile with the replacement profile.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original gasket uses a push-in mounting style.\u003c\/li\u003e\n  \u003cli\u003eCompare the original door configuration to confirm whether a 3- or 4-sided gasket arrangement is required.\u003c\/li\u003e\n  \u003cli\u003eReview the product image against the original gasket before purchase.\u003c\/li\u003e\n  \u003cli\u003eConfirm the Traulsen equipment identification and serial information.\u003c\/li\u003e\n  \u003cli\u003eInspect the door channel to confirm it can securely retain the push-in mounting section.\u003c\/li\u003e\n  \u003cli\u003eCheck door hinge alignment and latch condition, since poor alignment can affect gasket compression.\u003c\/li\u003e\n  \u003cli\u003eInspect the cabinet contact surface for damage, debris, or conditions that may prevent an even seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or misalignment can prevent the door from closing squarely against the gasket.\u003c\/li\u003e\n  \u003cli\u003eDoor latch components should be inspected because insufficient latching can reduce gasket compression and allow gaps at the door perimeter.\u003c\/li\u003e\n  \u003cli\u003eDoor closer components should be evaluated where present because they help bring the door into its closed position for proper magnetic contact.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or door channel should be inspected because damage or debris can prevent the push-in mounting section from seating securely.\u003c\/li\u003e\n  \u003cli\u003eThe cabinet door contact surface should be checked because dents, damage, or buildup can interfere with an even gasket seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Traulsen OEM part 341-38232-00?\u003c\/h3\u003e\n\u003cp\u003eTraulsen OEM part 341-38232-00 is a magnetic push-in door gasket used for door sealing in commercial refrigeration equipment. Its push-in mounting section is intended to seat in the door gasket channel, while the magnetic portion helps the closed door seal against the cabinet.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does the magnetic section of this Traulsen door gasket do?\u003c\/h3\u003e\n\u003cp\u003eThe magnetic section helps draw the door gasket against the cabinet opening when the door closes. A consistent seal helps limit cabinet air leakage around the door perimeter and supports normal commercial refrigeration operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does push-in style mean on Traulsen 341-38232-00?\u003c\/h3\u003e\n\u003cp\u003ePush-in style describes the gasket mounting design. The mounting section presses into the door channel rather than using a different attachment method. Compare the original gasket profile and its mounting section carefully before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat signs may indicate that a commercial refrigeration door gasket needs attention?\u003c\/h3\u003e\n\u003cp\u003eTears, hardened material, flattened compression areas, visible gaps around a closed door, moisture near the door opening, or frost buildup may indicate the gasket should be inspected. Door alignment and related hardware can also affect the seal.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I verify Traulsen 341-38232-00 is the correct door gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch Traulsen OEM number 341-38232-00 to the original component, then compare the magnetic gasket profile, push-in mounting style, door configuration, and equipment model and serial number. Review the existing door channel for a matching installation arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eShould door hinges and latch hardware be inspected when replacing this gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Worn hinges, latch components, or a misaligned door can keep a new Traulsen magnetic door gasket from making even contact around the cabinet opening. Inspect the door position, closing action, and gasket channel along with the original gasket.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Traulsen Magnetic Gasket — Push-In Style | Cooler \u0026 Freezer Door | 3 or 4-Sided\",\"description\":\"Traulsen 341-38232-00 magnetic push-in door gasket helps maintain a cooler or freezer door seal. Compare the original profile before ordering.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Traulsen\"},\"mpn\":\"341-38232-00\",\"sku\":\"PD-120-254\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Traulsen OEM part 341-38232-00?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Traulsen OEM part 341-38232-00 is a magnetic push-in door gasket used for door sealing in commercial refrigeration equipment. Its push-in mounting section is intended to seat in the door gasket channel, while the magnetic portion helps the closed door seal against the cabinet.\"}},{\"@type\":\"Question\",\"name\":\"What does the magnetic section of this Traulsen door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The magnetic section helps draw the door gasket against the cabinet opening when the door closes. A consistent seal helps limit cabinet air leakage around the door perimeter and supports normal commercial refrigeration operation.\"}},{\"@type\":\"Question\",\"name\":\"What does push-in style mean on Traulsen 341-38232-00?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Push-in style describes the gasket mounting design. The mounting section presses into the door channel rather than using a different attachment method. Compare the original gasket profile and its mounting section carefully before ordering.\"}},{\"@type\":\"Question\",\"name\":\"What signs may indicate that a commercial refrigeration door gasket needs attention?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tears, hardened material, flattened compression areas, visible gaps around a closed door, moisture near the door opening, or frost buildup may indicate the gasket should be inspected. Door alignment and related hardware can also affect the seal.\"}},{\"@type\":\"Question\",\"name\":\"How can I verify Traulsen 341-38232-00 is the correct door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Traulsen OEM number 341-38232-00 to the original component, then compare the magnetic gasket profile, push-in mounting style, door configuration, and equipment model and serial number. Review the existing door channel for a matching installation arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Should door hinges and latch hardware be inspected when replacing this gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Worn hinges, latch components, or a misaligned door can keep a new Traulsen magnetic door gasket from making even contact around the cabinet opening. Inspect the door position, closing action, and gasket channel along with the original gasket.\"}}]}\u003c\/script\u003e","brand":"Traulsen","offers":[{"title":"20-5\/8 x 29-1\/2\"","offer_id":42713071059167,"sku":"PD-120-254","price":47.0,"currency_code":"USD","in_stock":true},{"title":"20-3\/4\" x 59-5\/8\"","offer_id":42713071091935,"sku":"PD-120-262","price":56.0,"currency_code":"USD","in_stock":true},{"title":"21-1\/2\" x 29-1\/2\"","offer_id":42713071026399,"sku":"PD-120-198","price":32.99,"currency_code":"USD","in_stock":true},{"title":"21-1\/2\" x 59-1\/2\"","offer_id":42713071124703,"sku":"PD-120-199","price":46.0,"currency_code":"USD","in_stock":true},{"title":"23-1\/2 x 29-1\/2\"","offer_id":42713071157471,"sku":"PD-120-200","price":33.0,"currency_code":"USD","in_stock":true},{"title":"23-1\/2\" x 59-1\/2\"","offer_id":42713071190239,"sku":"PD-120-201","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/raulsen-magnetic-gasket-push-in-style-cooler-freezer-door-3-or-4-sided-1061071.jpg?v=1765853046"},{"product_id":"traulsen-air-cell-snap-in-door-gasket","title":"Traulsen Air Cell Snap-In Magnetic Door Gasket Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Traulsen\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e SVC-60005-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e SVC-60005-00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 341-60005-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Magnetic Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details Manufacturer: Traulsen OEM Part Number: SVC-60005-00 SKU: 341-60005-01 Part Type: Air Cell snap-in magnetic door gasket OEM Status: VERIFIED Product Overview The Traulsen SVC-60005-00 Air Cell snap-in magnetic door gasket is an OEM door-sealing component for commercial foodservice equipment. Installed around the door perimeter, this gasket helps the door close against the cabinet frame and maintain a consistent seal at the opening. Its magnetic sealing surface helps hold the door in position, while the snap-in mounting style is intended to secure the gasket in the appropriate door channel. A worn, torn, hardened, or misshaped gasket can prevent the door from making even contact around the frame. That condition can allow unwanted air movement through the door perimeter, contribute to moisture around the opening, and make normal door closure less reliable. Replacing a damaged gasket helps restore the door assembly to proper service condition when the original component is confirmed as Traulsen OEM part SVC-60005-00. Because door gasket profiles, mounting styles, and door configurations can vary, correct identification matters. Compare the original gasket, its mounting edge, the door channel, and equipment identification information before ordering. This listing identifies a Traulsen magnetic door gasket by OEM number SVC-60005-00; no equipment-model fitment is stated here.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This Traulsen magnetic door gasket provides a compressible sealing surface between a commercial equipment door and its surrounding frame. The gasket is intended to help close the gap around the door perimeter when the door is shut. Its magnetic feature assists door retention at the sealing surface, and its snap-in style supports placement in the applicable door gasket channel. Proper gasket condition is important to the overall operation of a door assembly. A gasket that is torn, distorted, loose, or no longer making consistent contact should be inspected along with the door, frame, hinges, latch, and gasket channel. The correct replacement is identified by Traulsen OEM number SVC-60005-00.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? Traulsen OEM part SVC-60005-00 provides a reliable identification point when replacing the original magnetic door gasket. Matching the manufacturer part number helps distinguish this gasket from similar-looking door seals with different profiles, mounting edges, or magnetic arrangements. Using the verified OEM number alongside a comparison of the original component can help reduce wrong-order risk and support more confident commercial equipment service.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A magnetic door gasket works at the meeting point between the door and cabinet frame. When the door closes, the gasket compresses around the perimeter to create a continuous contact surface. The magnetic portion of the gasket helps draw and hold the door against the frame, while the flexible gasket material accommodates normal door movement and compression. The snap-in edge is designed to sit in the corresponding gasket channel on the door assembly. For the gasket to work consistently, it must be seated evenly, the door must close squarely, and the frame contact area must remain free of damage or buildup that can interrupt the seal. Uneven compression, a loose mounting edge, or poor door alignment can prevent a new gasket from performing as intended. Inspecting the complete door assembly helps identify conditions that may affect the replacement gasket.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before replacing the gasket, compare the original mounting edge and perimeter shape with the replacement. Inspect the door channel, hinge condition, latch engagement, and frame contact area for conditions that could prevent even gasket compression.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible tears, splits, cracks, or missing sections in the gasket may indicate that replacement is needed.\u003c\/li\u003e\n  \u003cli\u003eA gasket that feels hardened, flattened, or permanently deformed should be inspected for compression loss.\u003c\/li\u003e\n  \u003cli\u003eGaps between the door gasket and frame when the door is closed can indicate uneven sealing contact.\u003c\/li\u003e\n  \u003cli\u003eA door that requires extra pressure to remain closed may indicate a gasket, latch, hinge, or alignment concern.\u003c\/li\u003e\n  \u003cli\u003eSections of the gasket pulling away from the door channel can indicate that the snap-in mounting edge needs attention.\u003c\/li\u003e\n  \u003cli\u003eUneven contact marks around the door perimeter may indicate that the gasket is not compressing consistently.\u003c\/li\u003e\n  \u003cli\u003eMoisture or residue near the door opening may indicate that the door seal and frame contact area should be inspected.\u003c\/li\u003e\n  \u003cli\u003eNoticeable air movement around the closed door perimeter can indicate a gasket, door alignment, or frame-contact issue.\u003c\/li\u003e\n  \u003cli\u003eA magnetic gasket that does not sit flat against the frame should be inspected for distortion or installation concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This Traulsen OEM magnetic door gasket is identified for commercial foodservice equipment service where a cabinet door relies on a continuous perimeter seal. It is relevant to restaurant kitchens, institutional foodservice operations, commercial maintenance departments, and equipment service companies that maintain Traulsen door assemblies. The OEM number SVC-60005-00 identifies the replacement component, but equipment-model fitment is not stated. Confirm suitability with the equipment data plate, serial information, original gasket profile, mounting style, and applicable manufacturer service information before purchase.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Traulsen OEM part number SVC-60005-00 to the original component or approved service information.\u003c\/li\u003e\n  \u003cli\u003eCompare the original gasket profile and snap-in mounting edge with the replacement.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment manufacturer, equipment model, and serial information from the data plate.\u003c\/li\u003e\n  \u003cli\u003eInspect the full door perimeter to confirm the required gasket shape and orientation.\u003c\/li\u003e\n  \u003cli\u003eCheck the gasket channel for damage, buildup, or sections that may prevent the new gasket from seating correctly.\u003c\/li\u003e\n  \u003cli\u003eCompare dimensions only with approved source data or a careful measurement of the original gasket.\u003c\/li\u003e\n  \u003cli\u003eInspect door hinges, latch engagement, and door alignment for conditions that can affect gasket compression.\u003c\/li\u003e\n  \u003cli\u003eReview the product image with the original component, including the mounting edge and magnetic sealing surface.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the order is for a Traulsen magnetic door gasket identified by OEM number SVC-60005-00.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or misalignment can prevent the door from applying even pressure to the gasket.\u003c\/li\u003e\n  \u003cli\u003eDoor latch components should be checked because weak or incorrect latch engagement can leave gaps at the door perimeter.\u003c\/li\u003e\n  \u003cli\u003eDoor closer components should be evaluated where used, since incomplete door closure can affect gasket contact.\u003c\/li\u003e\n  \u003cli\u003eGasket retainer or door channel surfaces should be inspected for damage or buildup that may keep a snap-in gasket from seating evenly.\u003c\/li\u003e\n  \u003cli\u003eDoor frame contact surfaces should be examined for dents, damage, or residue that can interrupt a continuous seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Traulsen OEM part SVC-60005-00?\u003c\/h3\u003e\n\u003cp\u003eTraulsen OEM part SVC-60005-00 is an Air Cell snap-in magnetic door gasket identified for commercial foodservice equipment door service.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps create a compressible seal between the door and cabinet frame. The magnetic sealing surface helps hold the closed door against the frame.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct Traulsen door gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number SVC-60005-00 when available, then compare the original gasket profile, snap-in mounting edge, perimeter shape, and equipment data plate information.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the door hardware when replacing a gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Inspect hinges, latch engagement, the door channel, and frame contact surfaces because alignment or hardware concerns can prevent even gasket compression.\u003c\/p\u003e\n\n\u003ch3\u003eWhat signs suggest a door gasket should be inspected?\u003c\/h3\u003e\n\u003cp\u003eTears, cracks, flattening, loose sections, visible gaps, uneven contact, moisture near the door opening, or a door that needs extra pressure to close may indicate that the gasket and related door components should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm equipment-model fitment?\u003c\/h3\u003e\n\u003cp\u003eNo equipment-model fitment is stated. Confirm the application using the equipment model and serial information, OEM part number SVC-60005-00, and a comparison with the original gasket.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Traulsen SVC-60005-00 Magnetic Door Gasket\",\"description\":\"Traulsen OEM SVC-60005-00 Air Cell snap-in magnetic door gasket for commercial foodservice equipment door service.\",\"sku\":\"341-60005-01\",\"mpn\":\"SVC-60005-00\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Traulsen\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Traulsen\"},\"category\":\"Commercial cooking equipment\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"SVC-60005-00\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Magnetic Door Gasket\"},{\"@type\":\"PropertyValue\",\"name\":\"Mounting Style\",\"value\":\"Snap-in\"},{\"@type\":\"PropertyValue\",\"name\":\"OEM Status\",\"value\":\"VERIFIED\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Traulsen OEM part SVC-60005-00?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Traulsen OEM part SVC-60005-00 is an Air Cell snap-in magnetic door gasket identified for commercial foodservice equipment door service.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps create a compressible seal between the door and cabinet frame. The magnetic sealing surface helps hold the closed door against the frame.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct Traulsen door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number SVC-60005-00 when available, then compare the original gasket profile, snap-in mounting edge, perimeter shape, and equipment data plate information.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the door hardware when replacing a gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Inspect hinges, latch engagement, the door channel, and frame contact surfaces because alignment or hardware concerns can prevent even gasket compression.\"}},{\"@type\":\"Question\",\"name\":\"What signs suggest a door gasket should be inspected?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tears, cracks, flattening, loose sections, visible gaps, uneven contact, moisture near the door opening, or a door that needs extra pressure to close may indicate that the gasket and related door components should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm equipment-model fitment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No equipment-model fitment is stated. Confirm the application using the equipment model and serial information, OEM part number SVC-60005-00, and a comparison with the original gasket.\"}}]}\u003c\/script\u003e","brand":"Traulsen","offers":[{"title":"7-1\/4\" x 23-3\/8\"","offer_id":42713076334815,"sku":"341-60005-01","price":65.0,"currency_code":"USD","in_stock":true},{"title":"7-1\/4\" x 28-3\/8\"","offer_id":42713076367583,"sku":"341-60005-04","price":72.3,"currency_code":"USD","in_stock":true},{"title":"23-1\/4\" x 23-1\/2\"","offer_id":42713076400351,"sku":"SVC-60005-00","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/traulsen-snap-itraulsen-air-cell-snap-in-magnetic-gasketn-gasket-5378241.jpg?v=1765853167"},{"product_id":"gasket-push-in-style-gasket-true","title":"True Push-In Magnetic Gasket — Cooler \u0026 Freezer Door | 3 or 4-Sided | Custom Sizes Available (PD-125)","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e True Manufacturing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 931433\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 931433\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 810803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details: True Manufacturing OEM Part Number 931433 | MPN 931433 | SKU 810803 | Part Type: Push-In Magnetic Door Gasket | OEM Status: VERIFIED True Manufacturing OEM 931433 is a push-in magnetic door gasket used on commercial refrigeration door assemblies. The gasket forms the flexible seal between the door and cabinet opening, helping the door close against the cabinet face and reducing cold-air leakage around the perimeter. Its magnetic sealing surface helps hold the door in proper contact when the door hardware and cabinet opening are in suitable condition. A worn, torn, hardened, distorted, or poorly compressed gasket can allow warm, humid air to enter the cabinet. That air intrusion may contribute to moisture near the door opening, frost accumulation, inconsistent cabinet conditions, and additional refrigeration system run time. Replacing a deteriorated seal is often an important part of maintaining a properly closing commercial refrigerator or freezer door. This genuine True OEM door gasket is identified by manufacturer part number 931433. Correct gasket selection depends on more than the general appearance of the old seal. The push-in mounting style, gasket profile, magnetic sealing area, door configuration, and original part identification should all agree before purchase. Comparing the original component and confirming the equipment data plate helps reduce wrong-part orders during commercial refrigeration service.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis door gasket seals the gap between a True commercial refrigeration door and its cabinet opening. The push-in mounting section seats into the appropriate door channel, while the flexible gasket body follows the door perimeter. Its magnetic portion helps the door maintain contact with the cabinet face when the door is shut. By limiting air movement through the door opening, the gasket supports cabinet temperature consistency and helps protect stored product from unnecessary exposure to warmer, humid surrounding air. A gasket cannot correct damaged door hardware, a bent door, or an unsuitable door opening, but it is a primary wear component in the door-sealing system. OEM 931433 provides a reliable identification point when replacing the original True gasket.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eA genuine True OEM replacement helps service teams identify the intended door gasket by the original manufacturer part number. Matching OEM 931433 to the original component supports a more controlled ordering process than selecting a gasket solely by appearance. This is particularly important for push-in magnetic gaskets, where the mounting section and sealing profile must correspond with the door assembly. Confirming the OEM number, comparing the removed gasket, and reviewing the equipment model and serial number can help prevent an incorrect door-seal repair.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eWhen the door closes, the gasket compresses against the cabinet face and creates a barrier around the door opening. The magnetic portion of this push-in gasket assists the closing seal by drawing the gasket toward the cabinet mating surface. The flexible material allows the seal to follow the door perimeter while accommodating normal door movement. For the seal to work effectively, the gasket must be seated correctly in its door channel and the door must close squarely against a clean cabinet surface. Door hinges, latches, closers, and the gasket mounting channel all influence the result. If the door is misaligned or the mounting area is damaged, a new gasket may not make even contact around the full opening. Inspecting the complete door assembly helps determine whether the gasket is the only component requiring attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing the existing gasket, compare its push-in mounting section and magnetic sealing profile with OEM 931433. Inspect the door channel for debris, damage, or sections that may prevent the gasket from seating evenly. Also evaluate hinge condition and door alignment, since an uneven door can create a gap even when the gasket itself is in good condition.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA torn, split, or visibly deteriorated door seal may indicate that the gasket should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain evenly closed around the cabinet opening can indicate gasket compression or door-alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eMoisture or condensation near the door perimeter may indicate warm-air entry through the sealing area.\u003c\/li\u003e\n  \u003cli\u003eFrost accumulating near a refrigerator or freezer door opening may indicate a poor door seal and should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eSections of gasket that remain flattened, twisted, or pulled away from the door channel may indicate wear or improper seating.\u003c\/li\u003e\n  \u003cli\u003eVisible gaps between the closed door and cabinet face can indicate a gasket, hinge, latch, or door-position concern.\u003c\/li\u003e\n  \u003cli\u003eCabinet temperature inconsistency may indicate air leakage at the door, although the refrigeration system should also be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door requiring unusual pressure to close can indicate a distorted gasket, obstruction, or door hardware condition.\u003c\/li\u003e\n  \u003cli\u003eA gasket that no longer follows the door perimeter evenly may indicate that the seal or its mounting channel needs attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eTrue OEM 931433 is used for commercial refrigeration door-sealing service where the original component and equipment identification confirm the application. Typical commercial environments supported by this product category include restaurant cold-storage areas, foodservice kitchens, refrigeration service companies, institutional foodservice operations, and facilities that maintain commercial refrigerator or freezer cabinets. Door gasket service is important wherever refrigerated storage depends on doors closing consistently throughout the day. Service personnel should confirm the equipment model and serial number, inspect the existing door assembly, and compare the original gasket before ordering. Specific cabinet fitment is not assumed without equipment documentation or direct confirmation against the original True part.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch True OEM part number 931433 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the part required is a door gasket for a True commercial refrigeration door assembly.\u003c\/li\u003e\n  \u003cli\u003eCompare the original gasket's push-in mounting section with the replacement before ordering.\u003c\/li\u003e\n  \u003cli\u003eVerify that the existing component uses a magnetic gasket design.\u003c\/li\u003e\n  \u003cli\u003eReview the product image alongside the removed gasket to compare the overall profile and mounting style.\u003c\/li\u003e\n  \u003cli\u003eCheck the equipment data plate for the complete equipment model and serial number.\u003c\/li\u003e\n  \u003cli\u003eInspect the door channel to confirm that it is intended for a push-in gasket and is not damaged.\u003c\/li\u003e\n  \u003cli\u003eEvaluate door hinge, latch, and closer condition because alignment issues can affect gasket contact.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the old gasket is the component causing the sealing concern before replacing related door hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because sagging or worn hinges can prevent the door from meeting the cabinet face evenly.\u003c\/li\u003e\n  \u003cli\u003eThe door latch should be checked because weak engagement can leave insufficient compression at the gasket sealing surface.\u003c\/li\u003e\n  \u003cli\u003eA door closer, where present on the equipment, should be evaluated because incomplete door closing can resemble a gasket problem.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or door channel should be inspected for damage, debris, or distortion that could keep a push-in gasket from seating properly.\u003c\/li\u003e\n  \u003cli\u003eThe cabinet mating surface should be kept clean and examined for damage because the gasket must contact that surface around the door opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is True OEM part number 931433?\u003c\/h3\u003e\n\u003cp\u003eTrue OEM 931433 is a push-in magnetic door gasket used in a commercial refrigeration door-sealing assembly when confirmed against the original part and equipment information.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps seal the space between a closed refrigeration door and the cabinet face. It helps limit cold-air loss and reduces entry of warmer, humid air around the door perimeter.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct True door gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 931433 when available, compare the original gasket's push-in mounting section and profile, and confirm the equipment model and serial number from the data plate.\u003c\/p\u003e\n\n\u003ch3\u003eCan a bad door gasket affect cabinet conditions?\u003c\/h3\u003e\n\u003cp\u003eYes. A torn, flattened, or poorly seated gasket may allow air leakage at the door. Moisture, frost, and inconsistent cabinet conditions can indicate that the gasket and related door components should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eShould door hinges be checked when replacing a gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Hinges, latches, closers, and door alignment affect whether the door compresses the gasket evenly. Inspecting those components can help determine whether a new gasket will seal correctly.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this gasket correct a door that is out of alignment?\u003c\/h3\u003e\n\u003cp\u003eNo. A replacement gasket may improve sealing when the old gasket is worn, but it does not correct damaged hinges, latch problems, a distorted door, or an unsuitable cabinet mating surface.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"True Push-In Magnetic Gasket — Cooler \u0026 Freezer Door | 3 or 4-Sided | Custom Sizes Available (PD-125)\",\"description\":\"True Manufacturing 931433 Door Gasket. True 931433 push-in magnetic door gasket for commercial refrigeration doors. Helps maintain a secure door seal; compare\",\"brand\":{\"@type\":\"Brand\",\"name\":\"True Manufacturing\"},\"mpn\":\"931433\",\"sku\":\"810803\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is True OEM part number 931433?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"True OEM 931433 is a push-in magnetic door gasket used in a commercial refrigeration door-sealing assembly when confirmed against the original part and equipment information.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps seal the space between a closed refrigeration door and the cabinet face. It helps limit cold-air loss and reduces entry of warmer, humid air around the door perimeter.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct True door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 931433 when available, compare the original gasket's push-in mounting section and profile, and confirm the equipment model and serial number from the data plate.\"}},{\"@type\":\"Question\",\"name\":\"Can a bad door gasket affect cabinet conditions?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A torn, flattened, or poorly seated gasket may allow air leakage at the door. Moisture, frost, and inconsistent cabinet conditions can indicate that the gasket and related door components should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Should door hinges be checked when replacing a gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Hinges, latches, closers, and door alignment affect whether the door compresses the gasket evenly. Inspecting those components can help determine whether a new gasket will seal correctly.\"}},{\"@type\":\"Question\",\"name\":\"Does this gasket correct a door that is out of alignment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. A replacement gasket may improve sealing when the old gasket is worn, but it does not correct damaged hinges, latch problems, a distorted door, or an unsuitable cabinet mating surface.\"}}]}\u003c\/script\u003e","brand":"True Manufacturing","offers":[{"title":"25-3\/4\" x 54-1\/8\"","offer_id":43727354167519,"sku":"810803","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/true-push-in-magnetic-gasket-cooler-freezer-door-3-or-4-sided-custom-sizes-available-pd-125-9036238.jpg?v=1765852866"},{"product_id":"latch-complete-tafco","title":"TAFCO Walk-In Cooler Door Latch — Flush \u0026 Offset Models","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e K58 FL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e K58 FL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-780-065\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Latch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details OEM Part Number: K58 FL MPN: K58 FL SKU: PD-780-065 Part Type: Latch OEM Status: VERIFIED Product Overview The K58 FL latch is a door-hardware component for a walk-in cooler door with flush and offset door configurations. Its job is straightforward but important: it provides the mechanical closing point that helps keep the door securely shut during normal commercial refrigeration use. A latch that closes consistently supports proper door operation and helps the door gasket remain seated against the cabinet opening. Door hardware receives repeated use in busy foodservice settings. Over time, a latch can become worn, loose, damaged, difficult to operate, or misaligned with the mating door hardware. Those conditions can make the door harder to close or prevent it from staying fully latched. Replacing a worn latch with the correctly identified K58 FL component helps service personnel restore dependable door closure while avoiding the guesswork that comes with visually similar hardware. This listing identifies OEM part number K58 FL. Before ordering, compare the removed latch with the product image, mounting arrangement, door configuration, and equipment identification details. Careful comparison is especially important for door hardware because differences in mounting position, latch orientation, and door style can affect installation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This latch provides a mechanical means of securing a walk-in cooler door in its closed position. When the door closes, the latch engages with its corresponding door hardware to hold the assembly shut. Reliable engagement is important because the door gasket depends on a properly closed door to make consistent contact around the opening. Although a latch is a simple mechanical component, it works alongside the hinges, door closer, strike area, and gasket. Wear or damage in any of those areas can affect how the door closes. The K58 FL latch should be selected by its verified OEM number and by comparison with the original component and door arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? The verified OEM part number K58 FL gives technicians and buyers a reliable identification point when replacing this latch. Using the correct OEM-numbered component helps reduce the risk of ordering door hardware with the wrong mounting arrangement, orientation, or closing relationship. Match K58 FL to the removed part and review the door configuration before purchase.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works As the walk-in cooler door moves into the closed position, the latch and mating hardware work together to retain the door. The latch supplies the holding action that keeps the door from opening under normal use. This mechanical relationship allows the door gasket to remain compressed against the cabinet opening when the door is fully closed. Proper operation depends on more than the latch alone. The door must be positioned correctly on its hinges, the latch must align with the opposing hardware, and the gasket must be in serviceable condition. If the door is sagging, the hardware is loose, or the gasket is worn, a new latch may not correct the complete door-closing concern. Inspect the surrounding door assembly during service so the replacement latch can operate as intended.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before removing the existing latch, note its mounting position and orientation on the door. Compare the mounting points, latch location, and door configuration with the replacement component. Inspect the hinge hardware, gasket contact area, and mating latch hardware at the same time, since wear in those areas can affect door closure.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe door may require extra effort before the latch engages.\u003c\/li\u003e\n  \u003cli\u003eThe latch can feel loose, worn, or inconsistent during normal operation.\u003c\/li\u003e\n  \u003cli\u003eThe door may not remain fully closed after it is pushed shut.\u003c\/li\u003e\n  \u003cli\u003eVisible damage, cracking, corrosion, or deformation on the latch should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA latch that does not line up with the mating hardware can indicate door or hardware alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eRepeated difficulty opening or closing the door may indicate wear in the latch assembly.\u003c\/li\u003e\n  \u003cli\u003eLoose mounting hardware around the latch can affect its ability to hold the door closed.\u003c\/li\u003e\n  \u003cli\u003eA door that rebounds after closing may indicate that the latch, gasket, hinges, or related door hardware needs inspection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This K58 FL latch is identified for walk-in cooler door use in commercial refrigeration environments. Walk-in cooler doors are commonly found in restaurant kitchens, foodservice facilities, institutional kitchens, grocery preparation areas, and commercial refrigeration service operations. In these settings, door hardware is used frequently and should be kept in good operating condition to support dependable access and door closure. Application must be confirmed before purchase. The verified part number, original latch arrangement, door style, and equipment identification details should all be reviewed. Do not rely on appearance alone when selecting replacement door hardware, since similar latches can differ in their mounting and closing arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OEM part number K58 FL to the removed component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement latch with the original part before placing the order.\u003c\/li\u003e\n  \u003cli\u003eConfirm whether the door uses the flush or offset configuration shown in the product identification.\u003c\/li\u003e\n  \u003cli\u003eReview the latch mounting location and mounting-hole arrangement on the door.\u003c\/li\u003e\n  \u003cli\u003eCheck the latch orientation and its relationship to the mating door hardware.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment data plate information, including the equipment model and serial number.\u003c\/li\u003e\n  \u003cli\u003eInspect the door hinges for looseness, wear, or sagging that could affect latch alignment.\u003c\/li\u003e\n  \u003cli\u003eReview the door gasket and closing surface for conditions that could prevent proper door closure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for wear, damage, or poor contact that may affect sealing when the door is latched.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or hinge pins: Check hinge hardware for looseness or wear that can change the door position and latch alignment.\u003c\/li\u003e\n  \u003cli\u003eMating door latch hardware: Inspect the corresponding latch engagement point for damage, wear, or alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Review the closer for operation and door-closing consistency, since it can influence how the latch engages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM part number K58 FL?\u003c\/h3\u003e\n\u003cp\u003eK58 FL is the verified OEM part number for this walk-in cooler door latch.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a walk-in cooler door latch do?\u003c\/h3\u003e\n\u003cp\u003eA door latch mechanically holds the walk-in cooler door in its closed position and works with the door hardware and gasket to support proper closure.\u003c\/p\u003e\n\n\u003ch3\u003eIs K58 FL used with flush and offset door configurations?\u003c\/h3\u003e\n\u003cp\u003eThe product identification lists K58 FL for flush and offset door configurations. Compare the removed latch and door arrangement before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eShould I replace the latch if the door does not close correctly?\u003c\/h3\u003e\n\u003cp\u003eThe latch should be inspected, but hinge condition, mounting hardware, the mating latch hardware, and the door gasket can also affect how the door closes.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I confirm this is the correct latch?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM part number K58 FL, compare the original component, review the mounting arrangement and orientation, and confirm the equipment model and serial number.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn latch affect walk-in cooler door operation?\u003c\/h3\u003e\n\u003cp\u003eYes. A worn, loose, damaged, or misaligned latch can make the door difficult to close or may prevent consistent latch engagement.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"K58 FL Commercial Walk-In Cooler Door Latch\",\"description\":\"OEM K58 FL walk-in cooler door latch for flush and offset door configurations. Compare the original latch and mounting layout before ordering.\",\"sku\":\"PD-780-065\",\"mpn\":\"K58 FL\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"K58 FL\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Latch\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Walk-In Cooler\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM part number K58 FL?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"K58 FL is the verified OEM part number for this walk-in cooler door latch.\"}},{\"@type\":\"Question\",\"name\":\"What does a walk-in cooler door latch do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A door latch mechanically holds the walk-in cooler door in its closed position and works with the door hardware and gasket to support proper closure.\"}},{\"@type\":\"Question\",\"name\":\"Is K58 FL used with flush and offset door configurations?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The product identification lists K58 FL for flush and offset door configurations. Compare the removed latch and door arrangement before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Should I replace the latch if the door does not close correctly?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The latch should be inspected, but hinge condition, mounting hardware, the mating latch hardware, and the door gasket can also affect how the door closes.\"}},{\"@type\":\"Question\",\"name\":\"How can I confirm this is the correct latch?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM part number K58 FL, compare the original component, review the mounting arrangement and orientation, and confirm the equipment model and serial number.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn latch affect walk-in cooler door operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A worn, loose, damaged, or misaligned latch can make the door difficult to close or may prevent consistent latch engagement.\"}}]}\u003c\/script\u003e","brand":"PartsDirectonline","offers":[{"title":"Flush","offer_id":42727615201503,"sku":"PD-780-065","price":241.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" to 1-1\/2\"","offer_id":42727663894751,"sku":"PD-780-648","price":235.2,"currency_code":"USD","in_stock":true},{"title":"1-3\/4\" to 2-1\/2\"","offer_id":42727615234271,"sku":"PD-780-070","price":267.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/tafco-walk-in-cooler-door-latch-flush-offset-models-6468327.jpg?v=1765852686"},{"product_id":"victory-wide-dart-mount-magnetic-gasket","title":"Victory Dart Magnetic Gasket — Custom Size | Cooler \u0026 Freezer Door Gasket | 3- or 4-Sided","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Victory\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 50596901\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 50596901\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-124-242\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Victory 50596901 dart mount magnetic door gasket is a custom-size door sealing component for commercial refrigeration equipment. Its job is to help the door close against the cabinet opening and maintain a dependable seal around the perimeter. A properly matched gasket helps limit cabinet air leakage, which supports stable cabinet temperature and reduces the chance of warm, humid air entering through gaps at the door. This gasket uses a dart-style mounting edge that is intended to seat in the appropriate door channel, along with a magnetic sealing section that helps the door remain closed against the cabinet face. Because gasket profile, mounting style, and overall size can vary between door assemblies, matching the manufacturer part number and comparing the removed gasket are important before ordering. Worn, torn, flattened, or poorly seated door gaskets can affect daily commercial refrigeration operation. Moisture, frost, door closure concerns, and visible gaps around the door can all point to a seal that should be inspected. This Victory door gasket gives service professionals and equipment operators a clear OEM-number reference when replacing a damaged or deteriorated door seal.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Victory door gasket helps create a sealed contact surface between a commercial refrigeration door and its cabinet opening. The magnetic portion helps hold the door against the cabinet face, while the dart mount is designed to secure the gasket in the matching door channel. Together, these features help reduce air movement through the door perimeter when the door is closed. A door gasket does not correct hinge, latch, door-frame, or cabinet alignment concerns on its own. It is one part of the complete door assembly. When the profile is correct and the gasket is seated properly, it can support consistent door closure and help limit the entry of warmer, moisture-laden air into the refrigerated cabinet.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eThe gasket runs around the edge of the door and creates a compressible sealing surface when the door closes. Its magnetic section helps draw the gasket toward the cabinet face, allowing the seal to make contact around the door opening. The dart-style edge attaches the gasket to the door through the corresponding mounting channel, helping keep the seal positioned in the intended location. During normal use, repeated door openings, cleaning, impact, and long-term compression can affect gasket condition. A torn corner, hardened sealing surface, loose section, or distorted profile may leave gaps between the door and cabinet. The gasket should be evaluated as part of the full door assembly, including the mounting channel, hinge condition, latch engagement, and door alignment. A correct part number alone is not enough when the original gasket profile or door configuration does not match.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore removing the original gasket, compare its dart profile, corner construction, magnetic sealing edge, and mounting location with the replacement reference. Inspect the door channel for debris, damage, or loose sections, and check that the door closes evenly before attributing a sealing concern to the gasket alone.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible tears, splits, or damaged corners in the door gasket may indicate that replacement is needed.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain evenly sealed around the cabinet opening can indicate compression loss or a gasket profile concern.\u003c\/li\u003e\n  \u003cli\u003eFrost or moisture near the door perimeter may indicate air entering through a poor door seal.\u003c\/li\u003e\n  \u003cli\u003eA flattened gasket surface may indicate that the seal is no longer making consistent contact with the cabinet face.\u003c\/li\u003e\n  \u003cli\u003eSections of gasket pulling away from the door channel may indicate a damaged dart mount or mounting channel concern.\u003c\/li\u003e\n  \u003cli\u003eA door that requires extra force to close should be inspected for gasket position, hinge alignment, and latch condition.\u003c\/li\u003e\n  \u003cli\u003eVisible gaps between the gasket and cabinet face can indicate a worn gasket, distorted door, or alignment issue.\u003c\/li\u003e\n  \u003cli\u003eWarm or humid air felt near a closed door may indicate that the gasket and related door components should be inspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Victory door gasket is intended for commercial refrigeration door service where the original component identifies with OEM number 50596901 and the dart mount magnetic gasket profile matches the door assembly. Appropriate commercial settings can include restaurant refrigeration service, foodservice maintenance operations, commercial kitchen repair, and refrigeration equipment service. Because door gaskets are configuration-specific, the equipment data plate, original gasket, door channel, and door layout should be reviewed before purchase. Confirming these details helps reduce wrong-part orders and supports a more reliable repair of the door sealing assembly.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Victory OEM number 50596901 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed gasket profile with the replacement, including the dart-style mounting edge.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original gasket is magnetic and uses the same door mounting method.\u003c\/li\u003e\n  \u003cli\u003eVerify the door configuration and whether the required gasket arrangement is three-sided or four-sided.\u003c\/li\u003e\n  \u003cli\u003eMeasure the original gasket only when measurements can be taken accurately from the removed component or approved documentation.\u003c\/li\u003e\n  \u003cli\u003eInspect the door channel for damage, debris, distortion, or loose areas that could prevent proper gasket seating.\u003c\/li\u003e\n  \u003cli\u003eCheck door hinges, latch engagement, and door alignment for conditions that can affect seal contact.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment data plate and original component before ordering when equipment application details are uncertain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because sagging or misalignment can prevent a new gasket from contacting the cabinet face evenly.\u003c\/li\u003e\n  \u003cli\u003eDoor latch components should be checked because weak or improper latch engagement can leave gaps even when the gasket is in good condition.\u003c\/li\u003e\n  \u003cli\u003eDoor closer hardware should be evaluated where present because incomplete door closure can be mistaken for a gasket concern.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or door channel should be inspected because damage or debris in the channel can keep the dart mount from seating correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Victory OEM number 50596901?\u003c\/h3\u003e\n\u003cp\u003eVictory OEM number 50596901 identifies a dart mount magnetic door gasket used in commercial refrigeration door service. Match the OEM number and compare the original gasket profile before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is the gasket profile important when ordering?\u003c\/h3\u003e\n\u003cp\u003eThe gasket profile determines how the seal attaches to the door and contacts the cabinet face. This part uses a dart-style mounting edge, so the original gasket and door channel should be compared carefully.\u003c\/p\u003e\n\n\u003ch3\u003eDoes a magnetic door gasket correct a door alignment problem?\u003c\/h3\u003e\n\u003cp\u003eNo. A magnetic gasket helps seal the door, but hinge wear, latch concerns, a damaged door, or poor alignment can still prevent proper contact around the cabinet opening.\u003c\/p\u003e\n\n\u003ch3\u003eWhat signs can indicate that a door gasket should be inspected?\u003c\/h3\u003e\n\u003cp\u003eTears, flattened sealing surfaces, loose gasket sections, visible door gaps, moisture, frost, and inconsistent door closure can indicate that the gasket and related door components should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eShould the door channel be checked before replacing this gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. The door channel should be clean, undamaged, and able to hold the dart mount securely. A damaged or obstructed channel can affect how the gasket seats and seals.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I reduce the chance of ordering the wrong gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch Victory OEM number 50596901, compare the original gasket profile and magnetic edge, confirm the door configuration, and review the equipment data plate before purchase.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Victory 50596901 Dart Mount Magnetic Door Gasket\",\"description\":\"Victory OEM 50596901 is a dart mount magnetic door gasket for commercial refrigeration door service. Compare the original gasket profile, mounting edge, and door configuration before ordering.\",\"sku\":\"PD-124-242\",\"mpn\":\"50596901\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Victory\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Victory\"}}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Victory OEM number 50596901?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Victory OEM number 50596901 identifies a dart mount magnetic door gasket used in commercial refrigeration door service. Match the OEM number and compare the original gasket profile before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Why is the gasket profile important when ordering?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The gasket profile determines how the seal attaches to the door and contacts the cabinet face. This part uses a dart-style mounting edge, so the original gasket and door channel should be compared carefully.\"}},{\"@type\":\"Question\",\"name\":\"Does a magnetic door gasket correct a door alignment problem?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. A magnetic gasket helps seal the door, but hinge wear, latch concerns, a damaged door, or poor alignment can still prevent proper contact around the cabinet opening.\"}},{\"@type\":\"Question\",\"name\":\"What signs can indicate that a door gasket should be inspected?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tears, flattened sealing surfaces, loose gasket sections, visible door gaps, moisture, frost, and inconsistent door closure can indicate that the gasket and related door components should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Should the door channel be checked before replacing this gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The door channel should be clean, undamaged, and able to hold the dart mount securely. A damaged or obstructed channel can affect how the gasket seats and seals.\"}},{\"@type\":\"Question\",\"name\":\"How can I reduce the chance of ordering the wrong gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Victory OEM number 50596901, compare the original gasket profile and magnetic edge, confirm the door configuration, and review the equipment data plate before purchase.\"}}]}\u003c\/script\u003e","brand":"Victory","offers":[{"title":"17-1\/2\" x 24-5\/8\"","offer_id":42803795722463,"sku":"PD-124-242","price":73.0,"currency_code":"USD","in_stock":true},{"title":"23-1\/2\" x 30-1\/4\"","offer_id":42803795787999,"sku":"PD-124-107","price":86.44,"currency_code":"USD","in_stock":true},{"title":"23-1\/2\" x 58\"","offer_id":42803795853535,"sku":"PD-124-092","price":106.23,"currency_code":"USD","in_stock":true},{"title":"23-5\/8\" x 28-1\/8\"","offer_id":42803795919071,"sku":"PD-124-098","price":81.65,"currency_code":"USD","in_stock":true},{"title":"23-5\/8\" x 62-1\/4\"","offer_id":42803796017375,"sku":"PD-124-243","price":110.65,"currency_code":"USD","in_stock":true},{"title":"24-1\/4\" x 30-1\/4\"","offer_id":42803796082911,"sku":"PD-124-099","price":86.08,"currency_code":"USD","in_stock":true},{"title":"24-1\/4\" x 62\"","offer_id":42803796181215,"sku":"PD-124-093","price":110.49,"currency_code":"USD","in_stock":true},{"title":"24-3\/4\" x 30-1\/4\"","offer_id":42803796312287,"sku":"PD-124-091","price":86.11,"currency_code":"USD","in_stock":true},{"title":"25-1\/4” x 28-1\/4\" (GRAY)","offer_id":42803796345055,"sku":"PD-124-094","price":81.59,"currency_code":"USD","in_stock":true},{"title":"25-1\/4\" x 58\"","offer_id":42803796377823,"sku":"PD-124-096","price":105.69,"currency_code":"USD","in_stock":true},{"title":"25-1\/4\" x 62\"","offer_id":42803796410591,"sku":"PD-124-108","price":110.59,"currency_code":"USD","in_stock":true},{"title":"28-1\/4\" x 33\"","offer_id":42803796443359,"sku":"PD-124-275","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/victory-dart-magnetic-gasket-custom-size-cooler-freezer-door-gasket-3-or-4-sided-6483023.jpg?v=1765853045"},{"product_id":"victory-wiper-gasket","title":"Victory Wiper Gasket \/ Door Sweep — 29 Inch Double Blade Gray | OEM Replacement","description":"\u003ch2\u003eVictory Wiper Gasket \/ Door Sweep — 29\" Double Blade Gray | OEM Replacement\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":42820260298975,"sku":"PD-124-371","price":77.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/victory-wiper-gasket-door-sweep-29-double-blade-gray-oem-replacement-6988564.jpg?v=1765852686"},{"product_id":"kason-led-light-fixture-1808-series","title":"Kason 1808 Series LED Light Fixture — Complete Assembly","description":"\u003ch2\u003eKason 1808 Series LED Light Fixture — Complete Assembly | 1160 Lumens, 13W, Vapor-Proof | 120–277 VAC\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43029477589215,"sku":"PD-780-829","price":271.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/kason-1808-series-led-light-fixture-complete-assembly-3631211.jpg?v=1765852927"},{"product_id":"avantco-digital-temperature-control","title":"Avantco Digital Temperature Control – OEM Controller with Probe \u0026 Display","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 17815350\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 17815350\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 17815350\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Temperature Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details: OEM number 17815350. MPN: 17815350. SKU: 17815350. OEM Status: VERIFIED. OEM 17815350 is a digital temperature control for commercial cooking equipment. This electronic controller includes a probe and display arrangement and serves as a key part of the equipment’s temperature-control system. By receiving temperature information from the sensing probe and presenting control information at the display, it supports temperature-related control response during normal foodservice equipment operation. Accurate control response matters because the controller is part of the electrical path that interprets probe input and communicates through the display-equipped control assembly. When the original component has been diagnosed as the source of a problem, OEM 17815350 provides a reliable part-number reference for replacement. Its probe, display arrangement, connectors, terminals, and mounting configuration should be compared carefully with the removed component before service. A temperature-control concern can resemble a sensor, harness, relay, contactor, display, or connector issue. Careful electrical diagnosis helps identify whether the controller requires replacement or whether another related component needs attention. Matching OEM number 17815350 to the original part helps reduce wrong-part orders, particularly where similar-looking controls may use different probe arrangements or connector layouts. This OEM controller is intended for commercial equipment service where correct identification, protected handling, and a thorough review of the related control circuit support dependable repair decisions.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis digital temperature control monitors input from its associated temperature probe and uses that information within the equipment control circuit. Its display provides a visible control interface, while the controller responds to sensed temperature conditions as part of the equipment’s electronic control operation. When the original control has been properly diagnosed as faulty, replacing it with OEM 17815350 helps restore the intended controller identity within the system. Because this is an electrical control component, related wiring, connectors, probe condition, display response, and switched components should be evaluated during qualified commercial equipment service.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eOEM 17815350 provides a reliable part-number reference when replacing the original digital temperature control. Matching the manufacturer part number helps distinguish this controller from controls that may look similar but use different connector layouts, probe arrangements, display configurations, or control logic. Using the verified OEM number supports more confident ordering and helps technicians compare the removed component directly with the replacement before service. Confirming the original part number, equipment data plate, and physical component details remains an important step when model-specific fitment documentation is not available.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eThe temperature probe supplies temperature information to the digital control. The controller interprets that input as part of the equipment’s electronic control circuit and provides a display-based interface for temperature-related control response. Depending on the equipment design, the control circuit may communicate with related wiring, relays, contactors, sensors, or display components. A problem anywhere in that related path can produce symptoms that appear to involve the controller. For that reason, a qualified technician should evaluate the controller in context rather than relying on one symptom alone. Connector condition, harness damage, probe placement, display operation, and related switched components can all affect control response. OEM number 17815350 should be matched to the original component before replacement, with attention to the display, probe, terminals, connector arrangement, and mounting configuration.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing a temperature control, compare OEM number 17815350 with the removed component and inspect the probe, connector positions, harness condition, display arrangement, and mounting points. Qualified personnel should diagnose related electrical components before identifying the controller as the source of a control issue.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAn unresponsive or inconsistent display may indicate that the temperature control or its related electrical connections should be inspected.\u003c\/li\u003e\n  \u003cli\u003eTemperature-related control response that does not follow normal equipment operation can indicate a controller, probe, harness, or related control-circuit concern.\u003c\/li\u003e\n  \u003cli\u003eIntermittent control behavior may indicate loose, damaged, or poorly seated connectors associated with the controller.\u003c\/li\u003e\n  \u003cli\u003eA visible display that does not respond as expected may indicate that the control assembly and its related wiring require diagnosis.\u003c\/li\u003e\n  \u003cli\u003eTemperature readings that appear inconsistent may indicate that the sensing probe and the temperature control should be evaluated together.\u003c\/li\u003e\n  \u003cli\u003eControl operation that cycles irregularly may indicate a concern in the controller, sensing circuit, relay, contactor, or associated wiring.\u003c\/li\u003e\n  \u003cli\u003eDamaged terminals, connectors, or controller housing should be inspected because physical damage can affect electrical connections.\u003c\/li\u003e\n  \u003cli\u003eA control issue following equipment service may indicate that connector placement, probe routing, or component identification should be confirmed.\u003c\/li\u003e\n  \u003cli\u003eFailure of an equipment function governed by the temperature-control circuit may indicate that the controller and related switched components require qualified diagnosis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis OEM digital temperature control is identified for commercial cooking equipment and is suited to foodservice maintenance and commercial kitchen repair applications where a temperature-related electronic control is required. It is appropriate for service work involving equipment control circuits, display-equipped controls, temperature probes, related harnesses, and switched electrical components. Because verified model fitment is not supplied, this part should not be assigned to a specific oven, fryer, range, warmer, or other equipment type without confirming the equipment model and serial number against applicable service documentation. Careful part-number matching is especially important when multiple controls have similar displays or connector layouts.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OEM number 17815350 to the number on the original component whenever it is legible.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed temperature control with the product image, including the display arrangement and overall controller configuration.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment model and serial number from the equipment data plate against applicable service documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the temperature probe arrangement and routing with the original component.\u003c\/li\u003e\n  \u003cli\u003eInspect connector positions, terminal layout, and harness connections before ordering.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting points and physical orientation against the removed control.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original component is a digital temperature control rather than a separate sensor, relay, contactor, or display component.\u003c\/li\u003e\n  \u003cli\u003eHave qualified personnel diagnose the control circuit so related wiring, probe, display, and switched components are not mistaken for a failed controller.\u003c\/li\u003e\n  \u003cli\u003eCompare the OEM number, MPN, and SKU: 17815350.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature probe: Inspect the probe and its connection because inaccurate or interrupted sensing input can resemble a controller concern.\u003c\/li\u003e\n  \u003cli\u003eWiring harness: Check harness routing, connector seating, and visible damage because the controller depends on reliable electrical connections.\u003c\/li\u003e\n  \u003cli\u003eDisplay or keypad assembly: Evaluate the display interface when display response is inconsistent, since the visible control interface may require separate attention.\u003c\/li\u003e\n  \u003cli\u003eRelay or contactor: Inspect related switched components because a control-response issue may originate outside the temperature control itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM 17815350?\u003c\/h3\u003e\n\u003cp\u003eOEM 17815350 is a digital temperature control with a probe and display arrangement for commercial cooking equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm that OEM 17815350 is the correct temperature control?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 17815350 to the original component, then compare the display, probe arrangement, connectors, terminals, mounting points, and equipment data plate information.\u003c\/p\u003e\n\n\u003ch3\u003eDoes a temperature-control problem always mean the controller has failed?\u003c\/h3\u003e\n\u003cp\u003eNo. A control concern may also involve the temperature probe, wiring harness, connectors, display assembly, relay, contactor, or another part of the control circuit. Qualified diagnosis is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should be inspected with this digital temperature control?\u003c\/h3\u003e\n\u003cp\u003eInspect the associated temperature probe, wiring harness, connector condition, display or keypad assembly, and related relay or contactor as applicable to the equipment.\u003c\/p\u003e\n\n\u003ch3\u003eIs model-specific fitment available for OEM 17815350?\u003c\/h3\u003e\n\u003cp\u003eVerified model-specific fitment is not supplied. Confirm the equipment model and serial number against applicable service documentation and compare the original component before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is the probe arrangement important when ordering a temperature control?\u003c\/h3\u003e\n\u003cp\u003eThe controller relies on temperature input from its associated probe. Comparing the probe arrangement and routing with the original component helps avoid selecting a control with different sensing details.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Avantco Digital Temperature Control – OEM Controller with Probe \u0026 Display\",\"description\":\"OEM 17815350 digital temperature control with probe and display for commercial cooking equipment. Compare the original component before ordering.\",\"mpn\":\"17815350\",\"sku\":\"17815350\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM 17815350?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OEM 17815350 is a digital temperature control with a probe and display arrangement for commercial cooking equipment.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm that OEM 17815350 is the correct temperature control?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 17815350 to the original component, then compare the display, probe arrangement, connectors, terminals, mounting points, and equipment data plate information.\"}},{\"@type\":\"Question\",\"name\":\"Does a temperature-control problem always mean the controller has failed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. A control concern may also involve the temperature probe, wiring harness, connectors, display assembly, relay, contactor, or another part of the control circuit. Qualified diagnosis is recommended.\"}},{\"@type\":\"Question\",\"name\":\"What should be inspected with this digital temperature control?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect the associated temperature probe, wiring harness, connector condition, display or keypad assembly, and related relay or contactor as applicable to the equipment.\"}},{\"@type\":\"Question\",\"name\":\"Is model-specific fitment available for OEM 17815350?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Verified model-specific fitment is not supplied. Confirm the equipment model and serial number against applicable service documentation and compare the original component before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Why is the probe arrangement important when ordering a temperature control?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The controller relies on temperature input from its associated probe. Comparing the probe arrangement and routing with the original component helps avoid selecting a control with different sensing details.\"}}]}\u003c\/script\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43617551286495,"sku":"17815350","price":689.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/avantco-digital-temperature-control-oem-controller-with-probe-display-fits-multiple-reach-in-prep-table-merchandiser-models-4689423.jpg?v=1765852686"},{"product_id":"turbo-air-thermostat-temperature-control","title":"Turbo Air Thermostat Temperature Control — 28-1\/4 Inch Capillary Tube | OEM Replacement","description":"\u003ch2\u003eTurbo Air Thermostat Temperature Control — 28-1\/4\" Capillary Tube | Genuine OEM Replacement\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43645038821599,"sku":"PD-134-031","price":204.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-thermostat-temperature-control-28-14-capillary-tube-oem-replacement-6347841.jpg?v=1765852989"},{"product_id":"turbo-air-motor-kit","title":"Turbo Air Motor Kit – 120V C-Frame with Fan Blade OEM Assembly","description":"\u003ch2\u003eTurbo Air Motor Kit — 120V C-Frame with Fan Blade | Complete OEM Assembly for TUF, TUR, TST \u0026amp; TBC Series\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43645115728095,"sku":"PD-134-092","price":210.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-motor-kit-120v-c-frame-with-fan-blade-complete-oem-assembly-for-tuf-tur-tst-tbc-series-4311757.jpg?v=1765852927"},{"product_id":"turbo-air-r7253-080-power-relay","title":"Turbo Air R7253-080 Power Relay | 25 Amp Solid State OEM","description":"\u003ch2\u003eTurbo Air R7253-080 Power Relay – 25 Amp Solid State OEM Replacement\u003c\/h2\u003e\u003ch4\u003eHow do I confirm this is the correct relay?\u003c\/h4\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"Turbo Air","offers":[{"title":"Default Title","offer_id":43645207281887,"sku":"R7253-080","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-power-relay-solid-state-25-amp-oem-replacement-for-commercial-coolers-freezers-4611082.jpg?v=1765853167"},{"product_id":"turbo-air-pcb-board-built-in-display","title":"Turbo Air PCB Board with Built-In Display — OEM Control Board | Compatible with MSR \u0026 TSR Series","description":"\u003ch2\u003eTurbo Air PCB Board with Built-In Display — OEM Replacement Control Board | Compatible with MSR \u0026amp; TSR Series\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43647727796447,"sku":"PD-134-027","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-pcb-board-with-built-in-display-oem-control-board-compatible-with-msr-tsr-series-3970062.jpg?v=1765853106"},{"product_id":"turbo-air-wire-shelf","title":"Turbo Air Wire Shelf – White Epoxy OEM Replacement for MSF49NM \u0026 MSR49NM","description":"\u003ch2\u003eTurbo Air Shelf — White Epoxy-Coated Wire Shelf 24-5\/8\" x 23-1\/2\" | OEM Replacement for MSF49NM, MSR49NM, TSF49SD, TSF72SD, TSR49SD\u003c\/h2\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43647735824607,"sku":"PD-134-247","price":215.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-shelf-white-epoxy-coated-wire-shelf-24-58-x-23-12-oem-replacement-for-msf49nm-msr49nm-tsf49sd-tsf72sd-tsr49sd-6656880.webp?v=1765853046"},{"product_id":"beverage-air-control-temp-18-cap","title":"Beverage-Air Temperature Control – OEM -12°F to 18°F, 18 Inch Capillary","description":"\u003cp data-start=\"238\" data-end=\"559\"\u003eThe \u003cstrong data-start=\"242\" data-end=\"297\"\u003eBeverage-Air Temperature Control with 18\" Capillary\u003c\/strong\u003e is a \u003cstrong data-start=\"303\" data-end=\"335\"\u003egenuine OEM replacement part\u003c\/strong\u003e engineered to maintain precise temperature regulation in your commercial refrigeration unit. Designed with a wide \u003cstrong data-start=\"450\" data-end=\"473\"\u003e-12°F to 18°F range\u003c\/strong\u003e, this control ensures consistent cooling performance for both coolers and freezers.\u003c\/p\u003e\u003cp data-start=\"561\" data-end=\"755\"\u003eIf your unit struggles to maintain proper temperature, replacing the thermostat with this OEM control helps restore food-safe storage conditions, improve efficiency, and extend equipment life.\u003c\/p\u003e\u003cp data-start=\"757\" data-end=\"785\"\u003e✅ \u003cstrong data-start=\"759\" data-end=\"783\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"786\" data-end=\"1088\"\u003e\n\u003cli data-start=\"786\" data-end=\"838\"\u003e\u003cp data-start=\"788\" data-end=\"838\"\u003eGenuine \u003cstrong data-start=\"796\" data-end=\"836\"\u003eBeverage-Air OEM temperature control\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"839\" data-end=\"901\"\u003e\u003cp data-start=\"841\" data-end=\"901\"\u003eWide range of \u003cstrong data-start=\"855\" data-end=\"872\"\u003e-12°F to 18°F\u003c\/strong\u003e for refrigeration accuracy\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"902\" data-end=\"974\"\u003e\u003cp data-start=\"904\" data-end=\"974\"\u003eIncludes an \u003cstrong data-start=\"916\" data-end=\"940\"\u003e18\" capillary sensor\u003c\/strong\u003e for proper temperature feedback\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"975\" data-end=\"1029\"\u003e\u003cp data-start=\"977\" data-end=\"1029\"\u003eImproves performance and prevents product spoilage\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1030\" data-end=\"1088\"\u003e\u003cp data-start=\"1032\" data-end=\"1088\"\u003eExact-fit replacement for multiple Beverage-Air models\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1090\" data-end=\"1093\"\u003e\u003ch2 data-start=\"1095\" data-end=\"1117\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1118\" data-end=\"1378\"\u003e\n\u003cli data-start=\"1118\" data-end=\"1145\"\u003e\u003cp data-start=\"1120\" data-end=\"1145\"\u003e\u003cstrong data-start=\"1120\" data-end=\"1130\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1146\" data-end=\"1184\"\u003e\u003cp data-start=\"1148\" data-end=\"1184\"\u003e\u003cstrong data-start=\"1148\" data-end=\"1162\"\u003ePart Type:\u003c\/strong\u003e Temperature Control\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1185\" data-end=\"1225\"\u003e\u003cp data-start=\"1187\" data-end=\"1225\"\u003e\u003cstrong data-start=\"1187\" data-end=\"1209\"\u003eTemperature Range:\u003c\/strong\u003e -12°F to 18°F\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1226\" data-end=\"1255\"\u003e\u003cp data-start=\"1228\" data-end=\"1255\"\u003e\u003cstrong data-start=\"1228\" data-end=\"1249\"\u003eCapillary Length:\u003c\/strong\u003e 18\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1256\" data-end=\"1333\"\u003e\n\u003cp data-start=\"1258\" data-end=\"1283\"\u003e\u003cstrong data-start=\"1258\" data-end=\"1281\"\u003eOverall Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1286\" data-end=\"1333\"\u003e\n\u003cli data-start=\"1286\" data-end=\"1300\"\u003e\u003cp data-start=\"1288\" data-end=\"1300\"\u003eLength: 3\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1303\" data-end=\"1316\"\u003e\u003cp data-start=\"1305\" data-end=\"1316\"\u003eWidth: 3\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1319\" data-end=\"1333\"\u003e\u003cp data-start=\"1321\" data-end=\"1333\"\u003eHeight: 1\"\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1334\" data-end=\"1378\"\u003e\u003cp data-start=\"1336\" data-end=\"1378\"\u003e\u003cstrong data-start=\"1336\" data-end=\"1344\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine Beverage-Air Part\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1380\" data-end=\"1383\"\u003e\u003ch2 data-start=\"1385\" data-end=\"1410\"\u003e🔹 Compatible Models\u003c\/h2\u003e\u003cul data-start=\"1411\" data-end=\"1474\"\u003e\n\u003cli data-start=\"1411\" data-end=\"1420\"\u003e\u003cp data-start=\"1413\" data-end=\"1420\"\u003eUCF27\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1421\" data-end=\"1433\"\u003e\u003cp data-start=\"1423\" data-end=\"1433\"\u003eUCF27-23\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1434\" data-end=\"1443\"\u003e\u003cp data-start=\"1436\" data-end=\"1443\"\u003eUCF48\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1444\" data-end=\"1454\"\u003e\u003cp data-start=\"1446\" data-end=\"1454\"\u003eUCF48A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1455\" data-end=\"1464\"\u003e\u003cp data-start=\"1457\" data-end=\"1464\"\u003eWTF27\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1465\" data-end=\"1474\"\u003e\u003cp data-start=\"1467\" data-end=\"1474\"\u003eWTF48\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1476\" data-end=\"1479\"\u003e\u003ch2 data-start=\"1481\" data-end=\"1527\"\u003e🔹 FAQ – Beverage-Air Temperature Control\u003c\/h2\u003e\u003cp data-start=\"1529\" data-end=\"1693\"\u003e\u003cstrong data-start=\"1529\" data-end=\"1572\"\u003eQ: Is this an OEM Beverage-Air control?\u003c\/strong\u003e\u003cbr data-start=\"1572\" data-end=\"1575\"\u003eA: Yes, this is a \u003cstrong data-start=\"1593\" data-end=\"1631\"\u003egenuine OEM replacement thermostat\u003c\/strong\u003e designed specifically for Beverage-Air refrigeration units.\u003c\/p\u003e\u003cp data-start=\"1695\" data-end=\"1832\"\u003e\u003cstrong data-start=\"1695\" data-end=\"1732\"\u003eQ: What is the temperature range?\u003c\/strong\u003e\u003cbr data-start=\"1732\" data-end=\"1735\"\u003eA: The control operates from \u003cstrong data-start=\"1764\" data-end=\"1781\"\u003e-12°F to 18°F\u003c\/strong\u003e, ideal for both freezer and cooler applications.\u003c\/p\u003e\u003cp data-start=\"1834\" data-end=\"1977\"\u003e\u003cstrong data-start=\"1834\" data-end=\"1872\"\u003eQ: What does the 18\" capillary do?\u003c\/strong\u003e\u003cbr data-start=\"1872\" data-end=\"1875\"\u003eA: The capillary sensor provides \u003cstrong data-start=\"1908\" data-end=\"1941\"\u003eaccurate temperature feedback\u003c\/strong\u003e to maintain consistent operation.\u003c\/p\u003e\u003cp data-start=\"1979\" data-end=\"2096\"\u003e\u003cstrong data-start=\"1979\" data-end=\"2013\"\u003eQ: Which models are supported?\u003c\/strong\u003e\u003cbr data-start=\"2013\" data-end=\"2016\"\u003eA: Compatible with \u003cstrong data-start=\"2035\" data-end=\"2087\"\u003eUCF27, UCF27-23, UCF48, UCF48A, WTF27, and WTF48\u003c\/strong\u003e units.\u003c\/p\u003e\u003cp data-start=\"2098\" data-end=\"2259\"\u003e\u003cstrong data-start=\"2098\" data-end=\"2131\"\u003eQ: Can I install this myself?\u003c\/strong\u003e\u003cbr data-start=\"2131\" data-end=\"2134\"\u003eA: Installation is possible with basic tools, but we recommend a \u003cstrong data-start=\"2199\" data-end=\"2223\"\u003equalified technician\u003c\/strong\u003e for proper setup and calibration.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 502-111A.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pd-product-faq\"\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eHow do I confirm this part fits my equipment?\u003c\/h4\u003e\n\u003cp\u003eCompare your existing part number, equipment model, and dimensions against this listing before ordering. If available, use the OEM \/ part number reference: 502-111A.\u003c\/p\u003e\n\u003ch4\u003eIs this intended as a replacement part?\u003c\/h4\u003e\n\u003cp\u003eYes. This listing is intended for buyers replacing a matching commercial refrigeration or foodservice equipment part. Verify compatibility before installation.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-internal-links\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-088\"\u003eSearch OEM \/ MPN PD-754-088\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=502%20111A\"\u003eSearch OEM \/ MPN 502 111A\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=502111A\"\u003eSearch OEM \/ MPN 502111A\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43647786451167,"sku":"502-111A","price":84.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-temperature-control-oem-120f-to-180f-18-capillary-1349394.jpg?v=1765852688"},{"product_id":"beverage-air-condensate-drain-pan","title":"Beverage-Air Condensate Drain Pan – OEM 13-1\/2 Inch x 18 Inch x 7\/8 Inch Replacement","description":"\u003cp data-start=\"238\" data-end=\"566\"\u003ehe \u003cstrong data-start=\"242\" data-end=\"279\"\u003eBeverage-Air Condensate Drain Pan\u003c\/strong\u003e is a \u003cstrong data-start=\"285\" data-end=\"317\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed to collect and manage condensation in your commercial refrigeration unit. Built for durability and precision fit, this pan helps prevent water leakage, protects internal components, and keeps your cooler or freezer operating efficiently.\u003c\/p\u003e\u003cp data-start=\"568\" data-end=\"749\"\u003eIf your existing drain pan is cracked, leaking, or corroded, replacing it with an OEM Beverage-Air part ensures long-lasting performance and compliance with food safety standards.\u003c\/p\u003e\u003cp data-start=\"751\" data-end=\"779\"\u003e✅ \u003cstrong data-start=\"753\" data-end=\"777\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"780\" data-end=\"1032\"\u003e\n\u003cli data-start=\"780\" data-end=\"833\"\u003e\u003cp data-start=\"782\" data-end=\"833\"\u003eGenuine \u003cstrong data-start=\"790\" data-end=\"831\"\u003eBeverage-Air OEM condensate drain pan\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"834\" data-end=\"885\"\u003e\u003cp data-start=\"836\" data-end=\"885\"\u003ePrevents water leakage and damage to components\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"886\" data-end=\"929\"\u003e\u003cp data-start=\"888\" data-end=\"929\"\u003eMaintains efficient moisture management\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"930\" data-end=\"973\"\u003e\u003cp data-start=\"932\" data-end=\"973\"\u003eDurable construction for commercial use\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"974\" data-end=\"1032\"\u003e\u003cp data-start=\"976\" data-end=\"1032\"\u003eExact-fit replacement for multiple Beverage-Air models\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1034\" data-end=\"1037\"\u003e\u003ch2 data-start=\"1039\" data-end=\"1061\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1062\" data-end=\"1215\"\u003e\n\u003cli data-start=\"1062\" data-end=\"1089\"\u003e\u003cp data-start=\"1064\" data-end=\"1089\"\u003e\u003cstrong data-start=\"1064\" data-end=\"1074\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1090\" data-end=\"1129\"\u003e\u003cp data-start=\"1092\" data-end=\"1129\"\u003e\u003cstrong data-start=\"1092\" data-end=\"1106\"\u003ePart Type:\u003c\/strong\u003e Condensate Drain Pan\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1130\" data-end=\"1170\"\u003e\u003cp data-start=\"1132\" data-end=\"1170\"\u003e\u003cstrong data-start=\"1132\" data-end=\"1147\"\u003eDimensions:\u003c\/strong\u003e 13-1\/2\" x 18\" x 7\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1171\" data-end=\"1215\"\u003e\u003cp data-start=\"1173\" data-end=\"1215\"\u003e\u003cstrong data-start=\"1173\" data-end=\"1181\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine Beverage-Air Part\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1217\" data-end=\"1220\"\u003e\u003ch2 data-start=\"1222\" data-end=\"1247\"\u003e🔹 Compatible Models\u003c\/h2\u003e\u003cp data-start=\"1248\" data-end=\"1330\"\u003eDesigned to fit a wide range of \u003cstrong data-start=\"1280\" data-end=\"1316\"\u003eBeverage-Air refrigeration units\u003c\/strong\u003e, including:\u003c\/p\u003e\u003cul data-start=\"1331\" data-end=\"1523\"\u003e\n\u003cli data-start=\"1331\" data-end=\"1365\"\u003e\u003cp data-start=\"1333\" data-end=\"1365\"\u003eUCF27, UCF27-23, UCF48, UCF48A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1366\" data-end=\"1392\"\u003e\u003cp data-start=\"1368\" data-end=\"1392\"\u003eUCR-27A-23, UCRD, URCD\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1393\" data-end=\"1409\"\u003e\u003cp data-start=\"1395\" data-end=\"1409\"\u003eWTF27, WTF48\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1410\" data-end=\"1450\"\u003e\u003cp data-start=\"1412\" data-end=\"1450\"\u003eWTR-27, WTR119, WTR27A, WTR41, WTR46\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1451\" data-end=\"1490\"\u003e\u003cp data-start=\"1453\" data-end=\"1490\"\u003eWTR48A, WTR48A-23, WTR60, WTR60A-23\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1491\" data-end=\"1523\"\u003e\u003cp data-start=\"1493\" data-end=\"1523\"\u003eWTR67, WTR72A, WTR93, WTRD27\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1525\" data-end=\"1528\"\u003e\u003ch2 data-start=\"1530\" data-end=\"1577\"\u003e🔹 FAQ – Beverage-Air Condensate Drain Pan\u003c\/h2\u003e\u003cp data-start=\"1579\" data-end=\"1691\"\u003e\u003cstrong data-start=\"1579\" data-end=\"1618\"\u003eQ: Is this an OEM replacement part?\u003c\/strong\u003e\u003cbr data-start=\"1618\" data-end=\"1621\"\u003eA: Yes, this is a \u003cstrong data-start=\"1639\" data-end=\"1688\"\u003egenuine OEM Beverage-Air condensate drain pan\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"1693\" data-end=\"1787\"\u003e\u003cstrong data-start=\"1693\" data-end=\"1742\"\u003eQ: What are the dimensions of this drain pan?\u003c\/strong\u003e\u003cbr data-start=\"1742\" data-end=\"1745\"\u003eA: It measures \u003cstrong data-start=\"1760\" data-end=\"1784\"\u003e13-1\/2\" x 18\" x 7\/8\"\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"1789\" data-end=\"1983\"\u003e\u003cstrong data-start=\"1789\" data-end=\"1835\"\u003eQ: Why should I replace my condensate pan?\u003c\/strong\u003e\u003cbr data-start=\"1835\" data-end=\"1838\"\u003eA: A damaged or leaking pan can cause \u003cstrong data-start=\"1876\" data-end=\"1928\"\u003ewater buildup, unit damage, or sanitation issues\u003c\/strong\u003e. Replacing it restores safe and efficient operation.\u003c\/p\u003e\u003cp data-start=\"1985\" data-end=\"2159\"\u003e\u003cstrong data-start=\"1985\" data-end=\"2035\"\u003eQ: Which models are compatible with this part?\u003c\/strong\u003e\u003cbr data-start=\"2035\" data-end=\"2038\"\u003eA: This pan fits \u003cstrong data-start=\"2055\" data-end=\"2087\"\u003emultiple Beverage-Air models\u003c\/strong\u003e, including UCF, UCR, WTF, and WTR series units (see full list above).\u003c\/p\u003e\u003cp data-start=\"2161\" data-end=\"2300\"\u003e\u003cstrong data-start=\"2161\" data-end=\"2194\"\u003eQ: Can I install this myself?\u003c\/strong\u003e\u003cbr data-start=\"2194\" data-end=\"2197\"\u003eA: Yes, installation is simple with basic tools. Just ensure proper alignment for effective drainage.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-172\"\u003eSearch OEM \/ MPN PD-754-172\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=706-207D\"\u003eSearch OEM \/ MPN 706-207D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=706207D\"\u003eSearch OEM \/ MPN 706207D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43647891046623,"sku":"706-207D","price":103.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-condensate-drain-pan-oem-13-12-x-18-x-78-replacement-7980930.jpg?v=1765853045"},{"product_id":"turbo-air-gasket","title":"Turbo Air Magnetic Gasket — Push-In Style with Flap Overlay","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Turbo Air\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e C962300100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e C962300100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-134-190\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details Manufacturer: Turbo Air OEM Part Number: C962300100 MPN: C962300100 SKU: PD-134-190 Part Type: Magnetic Door Gasket Style: Push-In Style with Flap Overlay OEM Status: VERIFIED Product Overview Turbo Air C962300100 is a magnetic door gasket with a push-in mounting style and flap overlay. It forms the flexible seal around the door opening, helping the door close against the cabinet frame and limiting the movement of air through the perimeter of the door. A gasket that seats correctly is an important part of maintaining a consistent door seal in commercial refrigeration equipment. Door gaskets endure repeated opening, closing, cleaning, temperature changes, and contact with the cabinet frame. Over time, the sealing surface can become torn, flattened, hardened, loose, or distorted. When that happens, the door may no longer close evenly against the cabinet, allowing moisture or outside air to enter around the opening. Replacing a worn gasket can help restore the door's intended sealing surface after the door hardware and gasket channel have also been inspected. This Turbo Air OEM part number provides a dependable identification point when ordering a magnetic gasket. The push-in profile, flap overlay, and original gasket shape should be compared carefully before purchase. Correct gasket identification matters because a door seal that looks similar may use a different mounting profile, corner shape, or overall configuration.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This door gasket creates a magnetic seal between the door and cabinet frame. Its flexible sealing edge compresses when the door closes, while the magnetic portion helps hold the door against the frame. The flap overlay adds coverage at the door perimeter where the gasket is designed to meet the cabinet opening. Together, these features support proper door closure and help limit cabinet air leakage. The gasket is a wear-related door component, so its condition should be considered along with hinge alignment, latch operation, and the condition of the gasket mounting channel.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? Using Turbo Air OEM part number C962300100 gives service personnel and equipment owners a clear part-number reference for this magnetic push-in door gasket. Matching the manufacturer part number helps reduce the risk of ordering a gasket with the wrong mounting design or sealing configuration. Compare the original component with the product image and confirm the part number before ordering, especially when equipment has multiple door configurations or has received previous service.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works When the door is brought closed, the gasket contacts the cabinet frame around the opening. The flexible material compresses to close small gaps at the sealing surface, and the magnetic section helps draw the door into its closed position. The push-in section is designed to seat in the appropriate gasket channel on the door, while the flap overlay provides additional perimeter coverage in its intended location. For the gasket to perform as intended, it must be seated evenly and the door must meet the frame squarely. A gasket can appear worn when the actual issue is a loose hinge, damaged latch, bent door, obstructed frame, or contaminated mounting channel. Conversely, a damaged or compressed gasket can contribute to a poor seal even when the door hardware is operating normally. Inspecting the entire door assembly helps identify the condition that needs attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before replacing the gasket, compare the full perimeter profile of the original component, including the push-in mounting section and flap overlay. Inspect the door channel for debris or damage, then check whether the hinges and latch allow the door to close evenly against the cabinet frame.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA torn, split, or separated gasket edge may indicate that the door seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eFlattened areas that no longer compress evenly can indicate loss of gasket resilience.\u003c\/li\u003e\n  \u003cli\u003eVisible gaps between the door gasket and cabinet frame may indicate a sealing or door-alignment concern.\u003c\/li\u003e\n  \u003cli\u003eMoisture forming near the door perimeter can indicate that outside air is entering around the seal.\u003c\/li\u003e\n  \u003cli\u003eFrost or ice near the door opening may indicate a door-sealing issue that requires inspection.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain closed evenly may indicate gasket wear, hinge wear, latch condition, or more than one of these concerns.\u003c\/li\u003e\n  \u003cli\u003eA loose gasket section pulling away from the door channel can indicate mounting-channel or gasket-profile damage.\u003c\/li\u003e\n  \u003cli\u003eWarm air felt around a closed door perimeter may indicate that the gasket contact surface should be inspected.\u003c\/li\u003e\n  \u003cli\u003eFood debris, residue, or damage along the gasket contact area can indicate that cleaning and seal condition should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eA door that requires unusual force to close can indicate an obstruction, gasket distortion, or door hardware condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This Turbo Air magnetic door gasket is intended for commercial refrigeration door service where OEM part number C962300100 is specified. It is relevant to foodservice maintenance personnel, refrigeration service companies, restaurant operators, and facilities that maintain refrigerated food storage or preparation equipment. Because door gasket configurations can differ across cabinet designs, this part should not be selected by appearance alone. Confirm the Turbo Air part number and compare the original gasket's push-in mounting profile, flap overlay, and overall shape before placing an order. Model-specific application information is not supplied here.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBefore You Order Match Turbo Air OEM part number C962300100 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the original gasket's push-in mounting section with the replacement gasket profile.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original gasket includes the same flap overlay arrangement.\u003c\/li\u003e\n  \u003cli\u003eReview the product image against the original door gasket before ordering.\u003c\/li\u003e\n  \u003cli\u003eCheck the equipment data plate for the model and serial number when confirming application information.\u003c\/li\u003e\n  \u003cli\u003eInspect the full gasket perimeter for the corner shape and overall configuration used on the door.\u003c\/li\u003e\n  \u003cli\u003eExamine the gasket channel for damage, buildup, or distortion that could affect seating.\u003c\/li\u003e\n  \u003cli\u003eCheck door hinges and latch condition, since alignment issues can affect gasket contact.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on an approximate visual match when the original part number or profile differs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or looseness can prevent the door from meeting the gasket evenly around the frame.\u003c\/li\u003e\n  \u003cli\u003eThe door latch should be checked because poor latch engagement can reduce the door's closing pressure against the gasket.\u003c\/li\u003e\n  \u003cli\u003eA door closer, where fitted, should be evaluated because incomplete door closure can resemble a gasket sealing problem.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or mounting track should be inspected for damage, residue, or deformation that may keep a push-in gasket from seating correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Turbo Air part number C962300100?\u003c\/h3\u003e\n\u003cp\u003eTurbo Air C962300100 is a magnetic door gasket with a push-in style mounting section and flap overlay.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps create a seal between the door and cabinet frame. Its flexible edge compresses at the frame, and its magnetic section helps hold the door in its closed position.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I confirm this is the correct gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch Turbo Air OEM part number C962300100 when available, then compare the original gasket profile, push-in mounting section, flap overlay, corner shape, and overall configuration.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn door gasket affect the door seal?\u003c\/h3\u003e\n\u003cp\u003eYes. A torn, flattened, loose, or distorted gasket can reduce contact between the door and cabinet frame. Door hinges, the latch, and the gasket channel should also be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eWhy should the gasket channel be inspected before replacement?\u003c\/h3\u003e\n\u003cp\u003eA push-in gasket depends on a clean, undamaged mounting channel for proper seating. Debris, buildup, or channel damage can interfere with gasket placement and door sealing.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this listing confirm fitment for a specific equipment model?\u003c\/h3\u003e\n\u003cp\u003eNo model-specific fitment is stated here. Confirm the OEM part number and compare the original gasket with the replacement before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Turbo Air C962300100 Magnetic Door Gasket\",\"description\":\"Turbo Air C962300100 magnetic push-in door gasket with flap overlay. Match the original gasket profile for commercial equipment service.\",\"sku\":\"PD-134-190\",\"mpn\":\"C962300100\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Turbo Air\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Turbo Air\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"C962300100\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Magnetic Door Gasket\"},{\"@type\":\"PropertyValue\",\"name\":\"Mounting Style\",\"value\":\"Push-In Style with Flap Overlay\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Turbo Air part number C962300100?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Turbo Air C962300100 is a magnetic door gasket with a push-in style mounting section and flap overlay.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps create a seal between the door and cabinet frame. Its flexible edge compresses at the frame, and its magnetic section helps hold the door in its closed position.\"}},{\"@type\":\"Question\",\"name\":\"How should I confirm this is the correct gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Turbo Air OEM part number C962300100 when available, then compare the original gasket profile, push-in mounting section, flap overlay, corner shape, and overall configuration.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn door gasket affect the door seal?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A torn, flattened, loose, or distorted gasket can reduce contact between the door and cabinet frame. Door hinges, the latch, and the gasket channel should also be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Why should the gasket channel be inspected before replacement?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A push-in gasket depends on a clean, undamaged mounting channel for proper seating. Debris, buildup, or channel damage can interfere with gasket placement and door sealing.\"}},{\"@type\":\"Question\",\"name\":\"Does this listing confirm fitment for a specific equipment model?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No model-specific fitment is stated here. Confirm the OEM part number and compare the original gasket with the replacement before ordering.\"}}]}\u003c\/script\u003e","brand":"Turbo Air","offers":[{"title":"8\" x 30\"","offer_id":43649551728863,"sku":"PD-134-190","price":55.0,"currency_code":"USD","in_stock":true},{"title":"8\" x 42-3\/4\"","offer_id":43649551761631,"sku":"PD-134-191","price":63.23,"currency_code":"USD","in_stock":true},{"title":"12-5\/8\" x 26-5\/8\"","offer_id":43649551794399,"sku":"PD-134-282","price":56.64,"currency_code":"USD","in_stock":true},{"title":"12-5\/8\" x 28-3\/8\"","offer_id":43649551827167,"sku":"PD-134-271","price":57.64,"currency_code":"USD","in_stock":true},{"title":"12-3\/4\" x 23-1\/4\"","offer_id":43649551859935,"sku":"PD-134-304","price":57.64,"currency_code":"USD","in_stock":true},{"title":"12-3\/4\" x 29-1\/4\"","offer_id":43649551892703,"sku":"PD-134-301","price":56.72,"currency_code":"USD","in_stock":true},{"title":"16-1\/2\" x 26-3\/4\"","offer_id":43649551925471,"sku":"PD-134-209","price":59.45,"currency_code":"USD","in_stock":true},{"title":"17-7\/8\" x 53\"","offer_id":43649551958239,"sku":"PD-134-210","price":72.74,"currency_code":"USD","in_stock":true},{"title":"22-1\/4\" x 26-1\/2\"","offer_id":43649551991007,"sku":"PD-134-012","price":80.12,"currency_code":"USD","in_stock":true},{"title":"22-1\/2 x 52-1\/4\"","offer_id":43649552023775,"sku":"PD-134-013","price":77.29,"currency_code":"USD","in_stock":true},{"title":"22-5\/8\" x 51-3\/4\"","offer_id":43649552056543,"sku":"PD-134-316","price":77.29,"currency_code":"USD","in_stock":true},{"title":"23-3\/4\" x 29-5\/8\"","offer_id":43649552089311,"sku":"PD-134-219","price":115.12,"currency_code":"USD","in_stock":true},{"title":"24\" x 52-1\/4\"","offer_id":43649552122079,"sku":"PD-134-232","price":80.12,"currency_code":"USD","in_stock":true},{"title":"24\" x 60-7\/8\"","offer_id":43649552154847,"sku":"PD-134-164","price":83.12,"currency_code":"USD","in_stock":true},{"title":"24-1\/4\" x 26-3\/4\"","offer_id":43649552187615,"sku":"PD-134-010","price":62.59,"currency_code":"USD","in_stock":true},{"title":"25-1\/4\" x 53-1\/4\"","offer_id":43649552220383,"sku":"PD-134-198","price":80.77,"currency_code":"USD","in_stock":true},{"title":"25-1\/2\" x 26-1\/2\"","offer_id":43649552253151,"sku":"PD-134-011","price":63.29,"currency_code":"USD","in_stock":true},{"title":"25-1\/2\" x 53-1\/4\"","offer_id":43649552285919,"sku":"PD-134-014","price":80.23,"currency_code":"USD","in_stock":true},{"title":"26\" x 53-1\/2\"","offer_id":43649552318687,"sku":"PD-134-371","price":80.2,"currency_code":"USD","in_stock":true},{"title":"26-1\/8 x 26-3\/4\"","offer_id":43649552351455,"sku":"PD-134-192","price":63.23,"currency_code":"USD","in_stock":true},{"title":"26-1\/4\" x 53-3\/4\"","offer_id":43649552384223,"sku":"PD-134-212","price":81.87,"currency_code":"USD","in_stock":true},{"title":"26-1\/2 x 29-1\/2\"","offer_id":43649552416991,"sku":"PD-134-213","price":66.87,"currency_code":"USD","in_stock":true},{"title":"26-5\/8 x 28\"","offer_id":43649552449759,"sku":"PD-134-017","price":68.0,"currency_code":"USD","in_stock":true},{"title":"26-5\/8\" x 28-3\/8\"","offer_id":43649552482527,"sku":"PD-134-116","price":84.13,"currency_code":"USD","in_stock":true},{"title":"26-3\/4\" x 61\"","offer_id":43649552515295,"sku":"PD-134-165","price":85.5,"currency_code":"USD","in_stock":true},{"title":"27-3\/4\" x 57-1\/4\"","offer_id":43649552548063,"sku":"PD-134-016","price":73.99,"currency_code":"USD","in_stock":true},{"title":"28-1\/4\" x 58-3\/8\"","offer_id":43649552580831,"sku":"PD-134-231","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/turbo-air-magnetic-gasket-push-in-style-with-flap-overlay-8882522.jpg?v=1765852686"},{"product_id":"arctic-air-evaporator-drain-pan-13x19","title":"Arctic Air Evaporator Drain Pan – OEM Replacement 13 Inch x 19 Inch (Fits Multiple Models)","description":"\u003cp data-start=\"265\" data-end=\"548\"\u003eThe \u003cstrong data-start=\"269\" data-end=\"304\"\u003eArctic Air Evaporator Drain Pan\u003c\/strong\u003e is a \u003cstrong data-start=\"310\" data-end=\"342\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed to collect and manage condensation from your refrigeration system. Measuring \u003cstrong data-start=\"429\" data-end=\"442\"\u003e13\" x 19\"\u003c\/strong\u003e, this drain pan ensures proper drainage, prevents leaks, and protects your equipment from water damage.\u003c\/p\u003e\u003cp data-start=\"550\" data-end=\"719\"\u003eCompatible with a range of \u003cstrong data-start=\"577\" data-end=\"623\"\u003eArctic Air commercial refrigeration models\u003c\/strong\u003e, this OEM drain pan is manufactured to exact specifications for durability and a precise fit.\u003c\/p\u003e\u003cp data-start=\"721\" data-end=\"749\"\u003e✅ \u003cstrong data-start=\"723\" data-end=\"747\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"750\" data-end=\"1131\"\u003e\n\u003cli data-start=\"750\" data-end=\"801\"\u003e\u003cp data-start=\"752\" data-end=\"801\"\u003eGenuine \u003cstrong data-start=\"760\" data-end=\"799\"\u003eArctic Air OEM evaporator drain pan\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"802\" data-end=\"831\"\u003e\u003cp data-start=\"804\" data-end=\"831\"\u003eDimensions: \u003cstrong data-start=\"816\" data-end=\"829\"\u003e13\" x 19\"\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"832\" data-end=\"883\"\u003e\u003cp data-start=\"834\" data-end=\"883\"\u003eDesigned to manage condensation \u0026amp; prevent leaks\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"884\" data-end=\"943\"\u003e\u003cp data-start=\"886\" data-end=\"943\"\u003eEnsures proper water drainage for refrigeration systems\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"944\" data-end=\"1003\"\u003e\u003cp data-start=\"946\" data-end=\"1003\"\u003eHelps protect equipment from corrosion and water damage\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1004\" data-end=\"1067\"\u003e\u003cp data-start=\"1006\" data-end=\"1067\"\u003eBuilt from OEM-grade materials for long-lasting reliability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1068\" data-end=\"1131\"\u003e\u003cp data-start=\"1070\" data-end=\"1131\"\u003eCompatible with multiple Arctic Air cooler \u0026amp; freezer models\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-start=\"1133\" data-end=\"1353\"\u003e\u003cstrong data-start=\"1133\" data-end=\"1163\"\u003eWhy Replace the Drain Pan?\u003c\/strong\u003e\u003cbr data-start=\"1163\" data-end=\"1166\"\u003eA cracked or damaged drain pan can cause \u003cstrong data-start=\"1207\" data-end=\"1257\"\u003ewater leaks, mold growth, and equipment damage\u003c\/strong\u003e. Replacing with a genuine OEM pan ensures your system runs efficiently and remains protected.\u003c\/p\u003e\u003chr data-start=\"1355\" data-end=\"1358\"\u003e\u003ch2 data-start=\"1360\" data-end=\"1382\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1383\" data-end=\"1732\"\u003e\n\u003cli data-start=\"1383\" data-end=\"1408\"\u003e\u003cp data-start=\"1385\" data-end=\"1408\"\u003e\u003cstrong data-start=\"1385\" data-end=\"1395\"\u003eBrand:\u003c\/strong\u003e Arctic Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1409\" data-end=\"1448\"\u003e\u003cp data-start=\"1411\" data-end=\"1448\"\u003e\u003cstrong data-start=\"1411\" data-end=\"1425\"\u003ePart Type:\u003c\/strong\u003e Evaporator Drain Pan\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1449\" data-end=\"1478\"\u003e\u003cp data-start=\"1451\" data-end=\"1478\"\u003e\u003cstrong data-start=\"1451\" data-end=\"1466\"\u003eDimensions:\u003c\/strong\u003e 13\" x 19\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1479\" data-end=\"1524\"\u003e\u003cp data-start=\"1481\" data-end=\"1524\"\u003e\u003cstrong data-start=\"1481\" data-end=\"1497\"\u003eApplication:\u003c\/strong\u003e Cooler \u0026amp; freezer systems\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1525\" data-end=\"1693\"\u003e\n\u003cp data-start=\"1527\" data-end=\"1551\"\u003e\u003cstrong data-start=\"1527\" data-end=\"1549\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1554\" data-end=\"1693\"\u003e\n\u003cli data-start=\"1554\" data-end=\"1569\"\u003e\u003cp data-start=\"1556\" data-end=\"1569\"\u003eFCFS201LFB3\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1572\" data-end=\"1587\"\u003e\u003cp data-start=\"1574\" data-end=\"1587\"\u003eFCFS201LFB4\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1590\" data-end=\"1604\"\u003e\u003cp data-start=\"1592\" data-end=\"1604\"\u003eFCFS201LFB\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1607\" data-end=\"1622\"\u003e\u003cp data-start=\"1609\" data-end=\"1622\"\u003eFCFS201RFB4\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1625\" data-end=\"1640\"\u003e\u003cp data-start=\"1627\" data-end=\"1640\"\u003eFCFS201RFB5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1643\" data-end=\"1693\"\u003e\u003cp data-start=\"1645\" data-end=\"1693\"\u003eFCFS201RFB5 (duplicate model number in source)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1694\" data-end=\"1732\"\u003e\u003cp data-start=\"1696\" data-end=\"1732\"\u003e\u003cstrong data-start=\"1696\" data-end=\"1713\"\u003eManufacturer:\u003c\/strong\u003e Arctic Air (OEM)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1734\" data-end=\"1737\"\u003e\u003ch2 data-start=\"1739\" data-end=\"1784\"\u003e🔹 FAQ – Arctic Air Evaporator Drain Pan\u003c\/h2\u003e\u003cp data-start=\"1786\" data-end=\"1882\"\u003e\u003cstrong data-start=\"1786\" data-end=\"1835\"\u003eQ: What are the dimensions of this drain pan?\u003c\/strong\u003e\u003cbr data-start=\"1835\" data-end=\"1838\"\u003eA: It measures \u003cstrong data-start=\"1853\" data-end=\"1879\"\u003e13 inches by 19 inches\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"1884\" data-end=\"2024\"\u003e\u003cstrong data-start=\"1884\" data-end=\"1929\"\u003eQ: Which Arctic Air models does this fit?\u003c\/strong\u003e\u003cbr data-start=\"1929\" data-end=\"1932\"\u003eA: Compatible with \u003cstrong data-start=\"1951\" data-end=\"2021\"\u003eFCFS201LFB3, FCFS201LFB4, FCFS201LFB, FCFS201RFB4, and FCFS201RFB5\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2026\" data-end=\"2118\"\u003e\u003cstrong data-start=\"2026\" data-end=\"2060\"\u003eQ: Is this an OEM replacement?\u003c\/strong\u003e\u003cbr data-start=\"2060\" data-end=\"2063\"\u003eA: Yes, it is a \u003cstrong data-start=\"2079\" data-end=\"2115\"\u003egenuine Arctic Air OEM drain pan\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2120\" data-end=\"2281\"\u003e\u003cstrong data-start=\"2120\" data-end=\"2172\"\u003eQ: Why should I replace my evaporator drain pan?\u003c\/strong\u003e\u003cbr data-start=\"2172\" data-end=\"2175\"\u003eA: To prevent \u003cstrong data-start=\"2189\" data-end=\"2243\"\u003ewater leaks, mold buildup, and equipment corrosion\u003c\/strong\u003e caused by a damaged or cracked pan.\u003c\/p\u003e\u003cp data-start=\"2283\" data-end=\"2406\"\u003e\u003cstrong data-start=\"2283\" data-end=\"2316\"\u003eQ: Can I install this myself?\u003c\/strong\u003e\u003cbr data-start=\"2316\" data-end=\"2319\"\u003eA: Yes, installation is straightforward but always ensure proper fit for your model.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=P-722-690\"\u003eSearch OEM \/ MPN P-722-690\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=11%20690\"\u003eSearch OEM \/ MPN 11 690\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=11690\"\u003eSearch OEM \/ MPN 11690\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43650119106783,"sku":"297165801","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/arctic-air-evaporator-drain-pan-oem-replacement-13-x-19-fits-multiple-models-6930411.jpg?v=1765853105"},{"product_id":"products-arctic-air-dixell-temperature-controller","title":"Arctic Air Dixell temperature controller – OEM Digital Control (-32°F to 140°F)","description":"\u003cp\u003eThe Arctic Air Dixell temperature controller is a genuine OEM digital temperature control designed for precise, reliable temperature management in Arctic Air commercial refrigeration equipment. Built to OEM specifications, this controller delivers accurate monitoring and consistent performance in demanding foodservice and commercial kitchen environments.\u003c\/p\u003e\u003cp\u003eWith a wide operating range of -32°F to +140°F, this controller ensures proper food storage temperatures and compliance with food safety standards. The easy-to-read digital display allows technicians and operators to quickly verify temperatures and system performance.\u003c\/p\u003e\u003cp\u003eReliable OEM Performance You Can Trust\u003c\/p\u003e\u003cp\u003eThis OEM Dixell controller features two relay outputs to independently control the compressor and defrost cycles, helping maintain stable cooling performance while improving energy efficiency. By optimizing defrost timing and compressor operation, this controller helps reduce wear on critical refrigeration components.\u003c\/p\u003e\u003cp\u003ePlease note: Temperature probes are sold separately.\u003c\/p\u003e\u003cp\u003eCompatible Arctic Air Models\u003c\/p\u003e\u003cp\u003eThis Arctic Air Dixell temperature controller is compatible with the following Arctic Air commercial refrigeration units:\u003cbr\u003eAMT60R, APP48R, APP71R, AR23E, AR49E, AST48R, AUC27R, and AUC48R.\u003c\/p\u003e\u003cp\u003eAs a genuine OEM replacement, it ensures proper fitment, dependable operation, and long-term durability.\u003c\/p\u003e\u003cp\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\u003cp\u003e- Genuine Arctic Air OEM Dixell temperature controller \u003cbr\u003e- Digital temperature control with clear display \u003cbr\u003e- Temperature range: -32°F to +140°F \u003cbr\u003e- Two relay outputs (compressor \u0026amp; defrost) \u003cbr\u003e- Supports consistent cooling and food safety compliance \u003cbr\u003e- Designed for Arctic Air commercial refrigeration equipment \u003c\/p\u003e\u003cp\u003eWhy Replace Your Temperature Controller?\u003c\/p\u003e\u003cp\u003eA failing temperature controller can lead to temperature fluctuations, food spoilage, increased energy costs, and unexpected equipment downtime. Replacing it with a genuine Arctic Air Dixell temperature controller restores reliable operation, protects stored food, and helps keep refrigeration systems running efficiently.\u003c\/p\u003e\u003cp\u003eSpecifications\u003c\/p\u003e\u003cp\u003eBrand: Arctic Air \u003cbr\u003ePart Type: Digital Temperature Controller \u003cbr\u003eModel: Dixell OEM \u003cbr\u003eTemperature Range: -32°F to +140°F \u003cbr\u003eRelay Outputs: 2 (Compressor \u0026amp; Defrost) \u003cbr\u003eProbes: Not included (sold separately) \u003cbr\u003eCompatible Equipment: Arctic Air commercial refrigeration units \u003c\/p\u003e\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\u003cp\u003eWhat is the temperature range of this controller? \u003cbr\u003eIt operates from -32°F to +140°F.\u003c\/p\u003e\u003cp\u003eDoes this controller include temperature probes? \u003cbr\u003eNo, temperature probes are sold separately.\u003c\/p\u003e\u003cp\u003eIs this a genuine OEM replacement? \u003cbr\u003eYes, this is a genuine Arctic Air OEM Dixell temperature controller.\u003c\/p\u003e\u003cp\u003eWhat functions does it control? \u003cbr\u003eIt supports both compressor and defrost functions using two relay outputs.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 65006.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pd-product-faq\"\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eHow do I confirm this part fits my equipment?\u003c\/h4\u003e\n\u003cp\u003eCompare your existing part number, equipment model, and dimensions against this listing before ordering. If available, use the OEM \/ part number reference: 65006.\u003c\/p\u003e\n\u003ch4\u003eIs this intended as a replacement part?\u003c\/h4\u003e\n\u003cp\u003eYes. This listing is intended for buyers replacing a matching commercial refrigeration or foodservice equipment part. Verify compatibility before installation.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-internal-links\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-722-189\"\u003eSearch OEM \/ MPN PD-722-189\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=11%20189\"\u003eSearch OEM \/ MPN 11 189\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=11189\"\u003eSearch OEM \/ MPN 11189\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43650125856991,"sku":"65006","price":437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/ARTI65006.gif?v=1664751178"},{"product_id":"arctic-air-retainer-mount-magnetic-gasket","title":"ARCTIC AIR Retainer Mount Magnetic Gasket","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 216522315\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 216522315\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 216522315\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details OEM Part Number: 216522315 OEM Status: VERIFIED Part Type: Retainer Mount Magnetic Door Gasket Product Overview A retainer mount magnetic door gasket is the flexible sealing component that closes the gap between a refrigeration cabinet door and its frame. OEM part number 216522315 is used to restore the door seal when the installed gasket is worn, torn, flattened, distorted, or no longer holding the door tightly against the cabinet. Its magnetic sealing edge helps the door stay closed while the gasket compresses against the door opening. Door sealing has a direct effect on everyday commercial refrigeration operation. A gasket that no longer seals evenly can allow warmer surrounding air and moisture to enter the cabinet. That added air infiltration may contribute to frost around the opening, moisture near the door, longer refrigeration run time, and difficulty maintaining the intended cabinet environment. Replacing a damaged gasket can help return the door assembly to proper sealing condition after the correct part is confirmed. This is a retainer mount style gasket, so the profile and mounting edge should be compared carefully with the removed component. Confirm OEM number 216522315, inspect the door channel, and review the door's alignment before ordering. Those checks help avoid selecting a gasket that appears similar but does not seat correctly in the existing retainer.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function The primary job of this door gasket is to create a continuous seal around a commercial refrigeration door opening. When the door closes, the gasket compresses against the cabinet face while its magnetic portion helps keep the door drawn into its normal closed position. This limits unwanted air exchange at the door perimeter. A sound gasket supports the work of the refrigeration system by reducing the amount of warm, humid air that can enter through the door opening. It also helps limit condensation and frost associated with poor door closure. Because the gasket is a wear item, its condition should be considered whenever a door has visible gaps, damaged sealing material, or uneven contact around the frame. Correct part identification remains important because the mounting style and gasket profile must suit the existing door assembly.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? Using the verified OEM part number helps keep the ordering process focused on the identified door gasket rather than a visually similar alternative. OEM number 216522315 provides a dependable reference for comparing the replacement with the original component and the equipment documentation. That part-number match can reduce the chance of receiving a gasket with a different retainer edge, sealing profile, or overall configuration. Confirm the number and compare the removed gasket before purchase, particularly when the old material is distorted or incomplete.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works When the door is brought shut, the gasket contacts the cabinet opening around the full perimeter. The flexible sealing body compresses where it meets the frame, closing small spaces that could otherwise permit air movement. The magnetic portion assists door closure by attracting to the mating surface, helping the door remain positioned against the cabinet while the gasket is compressed. The retainer mount edge holds the gasket in the door's designated channel or retainer. For the seal to work consistently, that edge must sit fully in place and the gasket must lie evenly around the door. Door alignment also matters: a gasket can be in good condition yet show uneven compression if hinges, latch hardware, or the door position prevent square closure. Inspect the mounting channel and the surrounding door hardware when evaluating a sealing concern. A clean, properly seated gasket gives the door assembly the best opportunity to maintain even contact around the cabinet opening.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before removing the existing gasket, compare its retainer edge and corner shape with the replacement reference. Inspect the gasket channel for debris, damage, or sections that may prevent the new gasket from seating evenly. Also check door hinges and latch condition if the door does not close squarely against the cabinet.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA visible split, tear, hardened area, or missing section in the gasket material may indicate that the seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eThe door may need extra pressure to remain closed when magnetic contact or gasket compression has weakened.\u003c\/li\u003e\n  \u003cli\u003eMoisture appearing repeatedly around the door perimeter can indicate air entering through an uneven seal.\u003c\/li\u003e\n  \u003cli\u003eFrost collecting near the door opening may indicate a gap between the gasket and cabinet face.\u003c\/li\u003e\n  \u003cli\u003eA section of the gasket that pulls away from its retainer can prevent continuous contact around the opening.\u003c\/li\u003e\n  \u003cli\u003eFlattened areas that do not rebound after the door opens may indicate reduced gasket compression.\u003c\/li\u003e\n  \u003cli\u003eLight or visible spacing around portions of a closed door may indicate that door alignment or gasket seating needs attention.\u003c\/li\u003e\n  \u003cli\u003eThe cabinet may experience more frequent door-area condensation when the door seal is damaged or distorted.\u003c\/li\u003e\n  \u003cli\u003eA door that rebounds after closing can indicate that the gasket, hinges, latch, or mating surface should be evaluated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This door gasket is intended for commercial refrigeration service where OEM part number 216522315 has been confirmed for the equipment being serviced. Door gaskets are common maintenance items in foodservice operations because refrigeration doors are opened frequently and the sealing material is exposed to repeated compression, moisture, cleaning, and routine wear. Restaurant kitchens, institutional foodservice facilities, refrigeration service companies, and maintenance teams may inspect door gaskets as part of ongoing cabinet upkeep. No equipment model fitment is stated here. Confirm the equipment data plate, OEM part number, and the original gasket configuration before ordering. The retainer mount style and magnetic door-sealing function should be compared with the component removed from the door.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OEM part number 216522315 to the equipment documentation or the identified original component.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the required part is a retainer mount magnetic door gasket.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement reference with the removed gasket's mounting edge and overall profile.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment model and serial number against available service documentation.\u003c\/li\u003e\n  \u003cli\u003eInspect whether the existing gasket sits in a retainer channel rather than using another mounting arrangement.\u003c\/li\u003e\n  \u003cli\u003eCheck the full door perimeter for the location and shape of the sealing material being replaced.\u003c\/li\u003e\n  \u003cli\u003eExamine hinges, latch hardware, and door position for conditions that could create uneven gasket compression.\u003c\/li\u003e\n  \u003cli\u003eInspect the gasket retainer or channel for damage, residue, or deformation that could interfere with seating.\u003c\/li\u003e\n  \u003cli\u003eUse the product image as a visual comparison aid, not as the only identification method.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or misalignment can keep the door from compressing the gasket evenly.\u003c\/li\u003e\n  \u003cli\u003eDoor latch hardware should be checked because incomplete latching can leave a gap even when the gasket is in good condition.\u003c\/li\u003e\n  \u003cli\u003eDoor closers should be evaluated where present because weak or damaged closing hardware can affect consistent door contact.\u003c\/li\u003e\n  \u003cli\u003eGasket retainers or tracks should be inspected for damage or buildup that may prevent the retainer mount edge from seating fully.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM part number 216522315?\u003c\/h3\u003e\n\u003cp\u003eOEM part number 216522315 identifies a retainer mount magnetic door gasket for confirmed commercial refrigeration service applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps seal the space between a refrigeration door and cabinet frame. The gasket compresses against the opening while the magnetic portion helps the door remain closed.\u003c\/p\u003e\n\n\u003ch3\u003eHow can I tell whether this gasket is the correct one?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 216522315, compare the original gasket profile and retainer edge, and confirm the equipment model and serial number with applicable documentation.\u003c\/p\u003e\n\n\u003ch3\u003eShould door hinges be checked when replacing a gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Door alignment affects how evenly the gasket contacts the cabinet. Inspect hinges, latch hardware, and the door position if the seal appears uneven.\u003c\/p\u003e\n\n\u003ch3\u003eWhat conditions can point to a worn door gasket?\u003c\/h3\u003e\n\u003cp\u003eTears, flattened sections, visible gaps, moisture around the door, frost near the opening, and poor door closure can all indicate that the gasket and related door hardware should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eIs equipment model fitment provided for this gasket?\u003c\/h3\u003e\n\u003cp\u003eSpecific equipment model fitment is not provided. Confirm OEM part number 216522315 and compare the original component before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"ARCTIC AIR Retainer Mount Magnetic Gasket\",\"description\":\"OEM 216522315 retainer mount magnetic door gasket for confirmed commercial refrigeration door-sealing service and replacement.\",\"mpn\":\"216522315\",\"sku\":\"216522315\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM part number 216522315?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OEM part number 216522315 identifies a retainer mount magnetic door gasket for confirmed commercial refrigeration service applications.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps seal the space between a refrigeration door and cabinet frame. The gasket compresses against the opening while the magnetic portion helps the door remain closed.\"}},{\"@type\":\"Question\",\"name\":\"How can I tell whether this gasket is the correct one?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 216522315, compare the original gasket profile and retainer edge, and confirm the equipment model and serial number with applicable documentation.\"}},{\"@type\":\"Question\",\"name\":\"Should door hinges be checked when replacing a gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Door alignment affects how evenly the gasket contacts the cabinet. Inspect hinges, latch hardware, and the door position if the seal appears uneven.\"}},{\"@type\":\"Question\",\"name\":\"What conditions can point to a worn door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tears, flattened sections, visible gaps, moisture around the door, frost near the opening, and poor door closure can all indicate that the gasket and related door hardware should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Is equipment model fitment provided for this gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Specific equipment model fitment is not provided. Confirm OEM part number 216522315 and compare the original component before ordering.\"}}]}\u003c\/script\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43652231758047,"sku":"216522315","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/arctic-air-retainer-mount-magnetic-gasket-6142589.jpg?v=1765852989"},{"product_id":"arctic-air-dart-mount-magnetic-gasket","title":"Arctic Air Magnetic Gasket – Dart Mount \u0026 Snap-In OEM Door Seals (Cooler \u0026 Freezer Models)","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 69236\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 69236\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 67067\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM part number 69236 is a magnetic door gasket with a dart-mount, snap-in fastening profile for commercial refrigeration equipment. This door seal sits around the door perimeter and helps the door close against the cabinet opening with consistent compression. Its magnetic sealing surface helps hold the door in position while the gasket profile helps limit air leakage at the cabinet edge. A door gasket is a wear-related component because it is compressed each time the door is opened and closed. Over time, tears, hardened areas, flattened sections, loose corners, or a distorted profile can reduce the quality of the seal. When the door does not seal evenly, outside air and moisture can enter the cabinet, which may contribute to frost, condensation, excess refrigeration run time, or unstable cabinet conditions. This OEM magnetic door gasket is identified by part number 69236. The dart-mount and snap-in profile are important ordering details because gasket profiles are not interchangeable simply because two seals have a similar overall shape. Compare the removed gasket, the door channel, the mounting edge, and the product image before ordering. A correct replacement helps restore proper door sealing and supports dependable day-to-day commercial refrigeration operation.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis door gasket creates the sealing contact between a refrigeration door and the cabinet frame. The magnetic portion helps the door remain drawn toward the cabinet when it is closed, while the dart-mount edge is intended to secure the gasket in the appropriate door channel. Proper gasket compression helps reduce cabinet air leakage around the door opening. A gasket in good condition supports the refrigeration system by helping keep warmer, moisture-laden air outside the cabinet. It does not cool the cabinet by itself, but a poor seal can make it harder for refrigeration components to maintain expected operating conditions. Part number 69236 should be selected only after the original gasket profile and mounting arrangement have been compared.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eThis genuine OEM door gasket is identified by OEM part number 69236. Using the verified part number helps reduce wrong-part orders when a replacement is needed for a worn or damaged door seal. The original component should still be compared carefully for gasket profile, dart-mount edge, corner shape, and door-channel engagement. Correct identification matters because a gasket that appears similar may not seat properly or provide even compression around the door.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eThe gasket mounts around the perimeter of the door using its dart-mount, snap-in edge. Once seated in the door channel, the flexible gasket body meets the cabinet frame as the door closes. The magnetic portion helps draw the sealing surfaces together, while the gasket material compresses to close small gaps between the door and cabinet opening. For the seal to work consistently, the gasket must sit fully in its channel and remain free of major tears, folds, hardened sections, or loose corners. Door alignment also affects sealing performance. A gasket may be in good condition but still show uneven contact if the door hinges, latch, closer, or door frame are out of position. Inspecting the complete door assembly helps identify whether the gasket alone is responsible for a sealing concern.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the gasket, inspect the door channel for debris, damage, or areas where the mounting edge has pulled loose. Also evaluate door alignment and latch or hinge condition. A new gasket can only seal evenly when the door closes squarely against the cabinet frame and the dart-mount edge is seated consistently around the full perimeter.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTorn, split, or missing gasket material may indicate that the door seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eFlattened areas that no longer compress evenly can indicate gasket wear.\u003c\/li\u003e\n  \u003cli\u003eA door that does not stay closed firmly may indicate a sealing, hinge, latch, or alignment concern.\u003c\/li\u003e\n  \u003cli\u003eVisible gaps between the door gasket and cabinet frame may indicate poor gasket seating or door misalignment.\u003c\/li\u003e\n  \u003cli\u003eMoisture or condensation near the door opening can indicate cabinet air leakage.\u003c\/li\u003e\n  \u003cli\u003eFrost developing around the door perimeter may indicate that warm, humid air is entering through an uneven seal.\u003c\/li\u003e\n  \u003cli\u003eA gasket corner that pulls away from the door channel should be inspected for mounting damage or profile mismatch.\u003c\/li\u003e\n  \u003cli\u003eCabinet conditions that are difficult to maintain may indicate a door-sealing concern among other refrigeration issues.\u003c\/li\u003e\n  \u003cli\u003eA door that requires extra pressure to close may indicate that the gasket, hinges, latch, or door frame needs evaluation.\u003c\/li\u003e\n  \u003cli\u003eCracked, hardened, warped, or permanently compressed gasket sections can indicate the need for replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis magnetic door gasket is used in commercial refrigeration service where maintaining a reliable door seal is important to cabinet operation. Appropriate service environments can include restaurant refrigeration maintenance, foodservice equipment repair, commercial kitchen service, and refrigeration service work. The verified application information supports commercial refrigeration use, but specific equipment fitment is not supplied. Confirm the equipment data plate, original component, gasket profile, dart-mount edge, and door-channel arrangement before ordering. Careful comparison is especially important for door gaskets because similar-looking seals may use different mounting profiles, corner arrangements, or compression surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OEM part number 69236 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed gasket's overall profile with the replacement product image.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original gasket uses a dart-mount, snap-in mounting edge.\u003c\/li\u003e\n  \u003cli\u003eInspect the door channel to confirm that the mounting arrangement matches the original gasket.\u003c\/li\u003e\n  \u003cli\u003eCompare the corner shape and orientation of the removed gasket before placing an order.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment data plate and serial number against available service information.\u003c\/li\u003e\n  \u003cli\u003eInspect the door frame for damage, distortion, or buildup that could affect gasket contact.\u003c\/li\u003e\n  \u003cli\u003eCheck hinge, latch, and closer condition because door misalignment can prevent even gasket compression.\u003c\/li\u003e\n  \u003cli\u003eDo not rely on overall appearance alone; similar magnetic gaskets can have different sealing and mounting profiles.\u003c\/li\u003e\n  \u003cli\u003eReview all available product identification details, including OEM number 69236, MPN 69236, and SKU 67067.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because worn or loose hinges can allow the door to sag and create uneven gasket contact.\u003c\/li\u003e\n  \u003cli\u003eDoor latch components should be inspected because a latch that does not pull the door into position can leave gaps at the gasket.\u003c\/li\u003e\n  \u003cli\u003eDoor closer components should be evaluated where used because incomplete door closure can prevent the magnetic gasket from sealing evenly.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or door channel should be inspected for debris, damage, or loose areas that may keep the dart-mount edge from seating fully.\u003c\/li\u003e\n  \u003cli\u003eThe door frame and strike area should be checked for distortion or damage that may affect compression around the door perimeter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM part number 69236?\u003c\/h3\u003e\n\u003cp\u003eOEM part number 69236 identifies this magnetic door gasket with a dart-mount, snap-in fastening profile.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps seal the space between the refrigeration door and cabinet frame. It helps limit air leakage and supports consistent door closure.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this door gasket is the correct one?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM part number 69236 when available, then compare the original gasket profile, dart-mount edge, corner arrangement, door channel, and equipment data plate.\u003c\/p\u003e\n\n\u003ch3\u003eCan a damaged gasket affect cabinet operation?\u003c\/h3\u003e\n\u003cp\u003eYes. A torn, flattened, hardened, or poorly seated gasket can allow air and moisture to enter around the door opening, which may contribute to frost, condensation, or unstable cabinet conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhy should hinges and latches be inspected with a door gasket?\u003c\/h3\u003e\n\u003cp\u003eDoor hinges, latches, and closers affect how squarely the door meets the cabinet frame. Misalignment can prevent even compression even when the gasket is in good condition.\u003c\/p\u003e\n\n\u003ch3\u003eAre dimensions provided for OEM 69236?\u003c\/h3\u003e\n\u003cp\u003eDimensions are not supplied in the verified product information. Compare the original component and mounting profile rather than ordering by estimated size.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Arctic Air Magnetic Gasket – Dart Mount \u0026 Snap-In OEM Door Seals (Cooler \u0026 Freezer Models)\",\"description\":\"OEM 69236 magnetic dart mount door gasket helps seal commercial refrigeration doors. Compare the original gasket profile and mounting edge before ordering.\",\"mpn\":\"69236\",\"sku\":\"67067\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM part number 69236?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OEM part number 69236 identifies this magnetic door gasket with a dart-mount, snap-in fastening profile.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps seal the space between the refrigeration door and cabinet frame. It helps limit air leakage and supports consistent door closure.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this door gasket is the correct one?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM part number 69236 when available, then compare the original gasket profile, dart-mount edge, corner arrangement, door channel, and equipment data plate.\"}},{\"@type\":\"Question\",\"name\":\"Can a damaged gasket affect cabinet operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. A torn, flattened, hardened, or poorly seated gasket can allow air and moisture to enter around the door opening, which may contribute to frost, condensation, or unstable cabinet conditions.\"}},{\"@type\":\"Question\",\"name\":\"Why should hinges and latches be inspected with a door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Door hinges, latches, and closers affect how squarely the door meets the cabinet frame. Misalignment can prevent even compression even when the gasket is in good condition.\"}},{\"@type\":\"Question\",\"name\":\"Are dimensions provided for OEM 69236?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Dimensions are not supplied in the verified product information. Compare the original component and mounting profile rather than ordering by estimated size.\"}}]}\u003c\/script\u003e","brand":"PartsDirectonline","offers":[{"title":"24” x 51-1\/2”","offer_id":50092265570527,"sku":"67067","price":273.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/arctic-air-magnetic-gasket-dart-mount-snap-in-oem-door-seals-cooler-freezer-models-7083019.png?v=1765852687"},{"product_id":"avantco-temperature-sensor-probe","title":"Avantco Temperature Sensor Probe – OEM Replacement for Temperature Controllers (Black Probe)","description":"\u003cp data-end=\"572\" data-start=\"278\"\u003eThe \u003cstrong data-end=\"318\" data-start=\"282\"\u003eAvantco Temperature Sensor Probe\u003c\/strong\u003e is a \u003cstrong data-end=\"356\" data-start=\"324\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed to work with Avantco digital temperature controllers. The sensor is essential for providing accurate temperature readings, allowing your refrigeration unit to maintain proper food-safe storage conditions.\u003c\/p\u003e\u003cp data-end=\"822\" data-start=\"574\"\u003eIf your Avantco unit is not maintaining the correct temperature, a faulty sensor could be the cause. Replacing it with this black probe ensures reliable communication with your controller and helps keep your cooler or freezer running efficiently.\u003c\/p\u003e\u003cp data-end=\"852\" data-start=\"824\"\u003e✅ \u003cstrong data-end=\"850\" data-start=\"826\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-end=\"1207\" data-start=\"853\"\u003e\n\u003cli data-end=\"905\" data-start=\"853\"\u003e\u003cp data-end=\"905\" data-start=\"855\"\u003eGenuine \u003cstrong data-end=\"903\" data-start=\"863\"\u003eAvantco OEM temperature sensor probe\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"975\" data-start=\"906\"\u003e\u003cp data-end=\"975\" data-start=\"908\"\u003eDesigned to work with Avantco \u003cstrong data-end=\"973\" data-start=\"938\"\u003edigital temperature controllers\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1041\" data-start=\"976\"\u003e\u003cp data-end=\"1041\" data-start=\"978\"\u003eProvides accurate temperature readings for reliable operation\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1111\" data-start=\"1042\"\u003e\u003cp data-end=\"1111\" data-start=\"1044\"\u003eEnsures consistent cooling performance and food safety compliance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1148\" data-start=\"1112\"\u003e\u003cp data-end=\"1148\" data-start=\"1114\"\u003eEasy to install replacement part\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1207\" data-start=\"1149\"\u003e\u003cp data-end=\"1207\" data-start=\"1151\"\u003eBuilt from durable OEM materials for long service life\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-end=\"1458\" data-start=\"1209\"\u003e\u003cstrong data-end=\"1248\" data-start=\"1209\"\u003eWhy Replace the Temperature Sensor?\u003c\/strong\u003e\u003cbr data-end=\"1251\" data-start=\"1248\"\u003eA malfunctioning sensor can cause \u003cstrong data-end=\"1352\" data-start=\"1285\"\u003efalse temperature readings, improper cooling, and food spoilage\u003c\/strong\u003e. Replacing with a genuine Avantco OEM probe ensures accuracy and keeps your unit operating efficiently.\u003c\/p\u003e\u003chr data-end=\"1463\" data-start=\"1460\"\u003e\u003ch2 data-end=\"1487\" data-start=\"1465\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-end=\"1885\" data-start=\"1488\"\u003e\n\u003cli data-end=\"1510\" data-start=\"1488\"\u003e\u003cp data-end=\"1510\" data-start=\"1490\"\u003e\u003cstrong data-end=\"1500\" data-start=\"1490\"\u003eBrand:\u003c\/strong\u003e Avantco\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1568\" data-start=\"1511\"\u003e\u003cp data-end=\"1568\" data-start=\"1513\"\u003e\u003cstrong data-end=\"1527\" data-start=\"1513\"\u003ePart Type:\u003c\/strong\u003e Temperature Sensor Probe (Black Probe)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1632\" data-start=\"1569\"\u003e\u003cp data-end=\"1632\" data-start=\"1571\"\u003e\u003cstrong data-end=\"1587\" data-start=\"1571\"\u003eApplication:\u003c\/strong\u003e Works with Avantco temperature controllers\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1849\" data-start=\"1633\"\u003e\n\u003cp data-end=\"1659\" data-start=\"1635\"\u003e\u003cstrong data-end=\"1657\" data-start=\"1635\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1849\" data-start=\"1662\"\u003e\n\u003cli data-end=\"1685\" data-start=\"1662\"\u003e\u003cp data-end=\"1685\" data-start=\"1664\"\u003eSS-UD-1R, SS-UD-1RA\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1742\" data-start=\"1688\"\u003e\u003cp data-end=\"1742\" data-start=\"1690\"\u003eSS-UD-2-60R, SS-UD-260RB, SS-UD-260RC, SS-UD-260RD\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1779\" data-start=\"1745\"\u003e\u003cp data-end=\"1779\" data-start=\"1747\"\u003eSS-UD-2R, SS-UD-2RB, SS-UD-2RC\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-end=\"1849\" data-start=\"1782\"\u003e\u003cp data-end=\"1849\" data-start=\"1784\"\u003eSS-UD-3R, SS-UD-3RE, SS-UD-3RF, SS-UD-3RG, SS-UD-3RH, SS-UD-3RI\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1885\" data-start=\"1850\"\u003e\u003cp data-end=\"1885\" data-start=\"1852\"\u003e\u003cstrong data-end=\"1869\" data-start=\"1852\"\u003eManufacturer:\u003c\/strong\u003e Avantco (OEM)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-end=\"1890\" data-start=\"1887\"\u003e\u003ch2 data-end=\"1938\" data-start=\"1892\"\u003e🔹 FAQ – Avantco Temperature Sensor Probe\u003c\/h2\u003e\u003cp data-end=\"2079\" data-start=\"1940\"\u003e\u003cstrong data-end=\"1972\" data-start=\"1940\"\u003eQ: What does this sensor do?\u003c\/strong\u003e\u003cbr data-end=\"1975\" data-start=\"1972\"\u003eA: It provides the \u003cstrong data-end=\"2018\" data-start=\"1994\"\u003etemperature readings\u003c\/strong\u003e that the Avantco controller uses to adjust cooling cycles.\u003c\/p\u003e\u003cp data-end=\"2253\" data-start=\"2081\"\u003e\u003cstrong data-end=\"2122\" data-start=\"2081\"\u003eQ: How do I know if my sensor is bad?\u003c\/strong\u003e\u003cbr data-end=\"2125\" data-start=\"2122\"\u003eA: Symptoms include \u003cstrong data-end=\"2250\" data-start=\"2145\"\u003eincorrect temperature readings, fluctuating cooling, or failure to maintain safe storage temperatures\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-end=\"2341\" data-start=\"2255\"\u003e\u003cstrong data-end=\"2279\" data-start=\"2255\"\u003eQ: Is this part OEM?\u003c\/strong\u003e\u003cbr data-end=\"2282\" data-start=\"2279\"\u003eA: Yes, it’s a \u003cstrong data-end=\"2338\" data-start=\"2297\"\u003egenuine Avantco OEM replacement probe\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-end=\"2454\" data-start=\"2343\"\u003e\u003cstrong data-end=\"2375\" data-start=\"2343\"\u003eQ: Which models does it fit?\u003c\/strong\u003e\u003cbr data-end=\"2378\" data-start=\"2375\"\u003eA: Fits a wide range of Avantco \u003cstrong data-end=\"2433\" data-start=\"2410\"\u003eSS-UD series models\u003c\/strong\u003e (full list above).\u003c\/p\u003e\u003cp data-end=\"2602\" data-start=\"2456\"\u003e\u003cstrong data-end=\"2489\" data-start=\"2456\"\u003eQ: Can I install this myself?\u003c\/strong\u003e\u003cbr data-end=\"2492\" data-start=\"2489\"\u003eA: Yes, the probe is straightforward to install, but ensure it is properly positioned for accurate readings.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 17813890.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pd-product-faq\"\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eHow do I confirm this part fits my equipment?\u003c\/h4\u003e\n\u003cp\u003eCompare your existing part number, equipment model, and dimensions against this listing before ordering. If available, use the OEM \/ part number reference: 17813890.\u003c\/p\u003e\n\u003ch4\u003eIs this intended as a replacement part?\u003c\/h4\u003e\n\u003cp\u003eYes. This listing is intended for buyers replacing a matching commercial refrigeration or foodservice equipment part. Verify compatibility before installation.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-internal-links\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-710-851\"\u003eSearch OEM \/ MPN PD-710-851\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=05-851%20\"\u003eSearch OEM \/ MPN 05-851 \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=058511899\"\u003eSearch OEM \/ MPN 058511899\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43653041651935,"sku":"17813890","price":46.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/avantco-temperature-sensor-probe-oem-replacement-for-temperature-controllers-black-probe-8857563.jpg?v=1765852686"},{"product_id":"beverage-air-control-board-pcb","title":"Beverage-Air Control Board PCB – OEM Replacement for KF \u0026 KR Series Models","description":"\u003cp data-start=\"237\" data-end=\"585\"\u003ehe \u003cstrong data-start=\"241\" data-end=\"277\"\u003eBeverage-Air Control Board (PCB)\u003c\/strong\u003e is a \u003cstrong data-start=\"283\" data-end=\"315\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed to keep your commercial refrigeration equipment running at peak performance. This printed circuit board (PCB) is engineered to deliver reliable temperature control and system management, ensuring your cooler or freezer maintains food-safe holding conditions.\u003c\/p\u003e\u003cp data-start=\"587\" data-end=\"792\"\u003eWhether you are replacing a failed board or performing preventative maintenance, using an \u003cstrong data-start=\"677\" data-end=\"717\"\u003eauthentic Beverage-Air control board\u003c\/strong\u003e guarantees compatibility, durability, and compliance with OEM standards.\u003c\/p\u003e\u003cp data-start=\"794\" data-end=\"822\"\u003e✅ \u003cstrong data-start=\"796\" data-end=\"820\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"823\" data-end=\"1104\"\u003e\n\u003cli data-start=\"823\" data-end=\"881\"\u003e\u003cp data-start=\"825\" data-end=\"881\"\u003eGenuine \u003cstrong data-start=\"833\" data-end=\"879\"\u003eBeverage-Air OEM replacement control board\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"882\" data-end=\"944\"\u003e\u003cp data-start=\"884\" data-end=\"944\"\u003eMaintains accurate temperature regulation \u0026amp; system control\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"945\" data-end=\"1009\"\u003e\u003cp data-start=\"947\" data-end=\"1009\"\u003eDesigned for long-lasting performance in commercial kitchens\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1010\" data-end=\"1058\"\u003e\u003cp data-start=\"1012\" data-end=\"1058\"\u003eEasy installation with exact-fit engineering\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1059\" data-end=\"1104\"\u003e\u003cp data-start=\"1061\" data-end=\"1104\"\u003eHelps prevent downtime and costly repairs\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1106\" data-end=\"1109\"\u003e\u003ch2 data-start=\"1111\" data-end=\"1133\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1134\" data-end=\"1414\"\u003e\n\u003cli data-start=\"1134\" data-end=\"1161\"\u003e\u003cp data-start=\"1136\" data-end=\"1161\"\u003e\u003cstrong data-start=\"1136\" data-end=\"1146\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1162\" data-end=\"1200\"\u003e\u003cp data-start=\"1164\" data-end=\"1200\"\u003e\u003cstrong data-start=\"1164\" data-end=\"1178\"\u003ePart Type:\u003c\/strong\u003e Control Board (PCB)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1201\" data-end=\"1245\"\u003e\u003cp data-start=\"1203\" data-end=\"1245\"\u003e\u003cstrong data-start=\"1203\" data-end=\"1211\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine Beverage-Air Part\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1246\" data-end=\"1331\"\u003e\n\u003cp data-start=\"1248\" data-end=\"1273\"\u003e\u003cstrong data-start=\"1248\" data-end=\"1271\"\u003eOverall Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1276\" data-end=\"1331\"\u003e\n\u003cli data-start=\"1276\" data-end=\"1292\"\u003e\u003cp data-start=\"1278\" data-end=\"1292\"\u003eLength: 9.3\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1295\" data-end=\"1311\"\u003e\u003cp data-start=\"1297\" data-end=\"1311\"\u003eWidth: 2.55\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1314\" data-end=\"1331\"\u003e\u003cp data-start=\"1316\" data-end=\"1331\"\u003eHeight: 1.25\"\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1332\" data-end=\"1414\"\u003e\n\u003cp data-start=\"1334\" data-end=\"1358\"\u003e\u003cstrong data-start=\"1334\" data-end=\"1356\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1361\" data-end=\"1414\"\u003e\n\u003cli data-start=\"1361\" data-end=\"1372\"\u003e\u003cp data-start=\"1363\" data-end=\"1372\"\u003eKF241AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1375\" data-end=\"1386\"\u003e\u003cp data-start=\"1377\" data-end=\"1386\"\u003eKF481AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1389\" data-end=\"1400\"\u003e\u003cp data-start=\"1391\" data-end=\"1400\"\u003eKF745AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1403\" data-end=\"1414\"\u003e\u003cp data-start=\"1405\" data-end=\"1414\"\u003eKR741AS\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1416\" data-end=\"1419\"\u003e\u003ch2 data-start=\"1421\" data-end=\"1465\"\u003e🔹 FAQ – Beverage-Air Control Board PCB\u003c\/h2\u003e\u003cp data-start=\"1467\" data-end=\"1619\"\u003e\u003cstrong data-start=\"1467\" data-end=\"1516\"\u003eQ: Is this an OEM Beverage-Air control board?\u003c\/strong\u003e\u003cbr data-start=\"1516\" data-end=\"1519\"\u003eA: Yes, this is a \u003cstrong data-start=\"1537\" data-end=\"1557\"\u003egenuine OEM part\u003c\/strong\u003e designed specifically for Beverage-Air refrigeration units.\u003c\/p\u003e\u003cp data-start=\"1621\" data-end=\"1741\"\u003e\u003cstrong data-start=\"1621\" data-end=\"1659\"\u003eQ: Which models does this PCB fit?\u003c\/strong\u003e\u003cbr data-start=\"1659\" data-end=\"1662\"\u003eA: This control board fits \u003cstrong data-start=\"1689\" data-end=\"1738\"\u003eKF241AS, KF481AS, KF745AS, and KR741AS models\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"1743\" data-end=\"1901\"\u003e\u003cstrong data-start=\"1743\" data-end=\"1781\"\u003eQ: What does the control board do?\u003c\/strong\u003e\u003cbr data-start=\"1781\" data-end=\"1784\"\u003eA: The PCB regulates \u003cstrong data-start=\"1805\" data-end=\"1869\"\u003etemperature, compressor cycles, and overall unit performance\u003c\/strong\u003e, ensuring consistent cooling.\u003c\/p\u003e\u003cp data-start=\"1903\" data-end=\"2063\"\u003e\u003cstrong data-start=\"1903\" data-end=\"1962\"\u003eQ: How do I know if my control board needs replacement?\u003c\/strong\u003e\u003cbr data-start=\"1962\" data-end=\"1965\"\u003eA: Signs include \u003cstrong data-start=\"1982\" data-end=\"2045\"\u003einconsistent temperature, unit not starting, or error codes\u003c\/strong\u003e on the display.\u003c\/p\u003e\u003cp data-start=\"2065\" data-end=\"2241\"\u003e\u003cstrong data-start=\"2065\" data-end=\"2098\"\u003eQ: Can I install this myself?\u003c\/strong\u003e\u003cbr data-start=\"2098\" data-end=\"2101\"\u003eA: While installation is straightforward, it’s best to have a \u003cstrong data-start=\"2163\" data-end=\"2187\"\u003equalified technician\u003c\/strong\u003e perform the replacement to avoid electrical issues.\u003c\/p\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 30243R2000BEV-AIR.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pd-product-faq\"\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003ch4\u003eHow do I confirm this part fits my equipment?\u003c\/h4\u003e\n\u003cp\u003eCompare your existing part number, equipment model, and dimensions against this listing before ordering. If available, use the OEM \/ part number reference: 30243R2000BEV-AIR.\u003c\/p\u003e\n\u003ch4\u003eIs this intended as a replacement part?\u003c\/h4\u003e\n\u003cp\u003eYes. This listing is intended for buyers replacing a matching commercial refrigeration or foodservice equipment part. Verify compatibility before installation.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-internal-links\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-219\"\u003eSearch OEM \/ MPN PD-754-219\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27-219\"\u003eSearch OEM \/ MPN 27-219\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27219\"\u003eSearch OEM \/ MPN 27219\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43653317361887,"sku":"30243R2000","price":565.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-control-board-pcb-oem-replacement-for-kf-kr-series-models-2332495.jpg?v=1765852988"},{"product_id":"glastender-wire-shelves","title":"Glastender Wire Shelves – Gray Epoxy OEM Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Glastender\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 06001401\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 06001401\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-758-194\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eGlastender OEM part 06001401 is a hinge used as a mechanical door-hardware component on applicable commercial equipment. A hinge carries the door through its opening and closing travel while helping the door remain positioned correctly against the cabinet or equipment frame. Its condition matters because worn, loose, bent, or damaged hinge hardware can affect door movement, alignment, and dependable closure. For commercial equipment service, replacing a damaged hinge can help restore smooth door operation and provide a sound mounting point for the door assembly. This manufacturer-identified hinge is intended to be ordered by the verified Glastender part number 06001401. Matching that number with the removed component helps reduce the risk of receiving the wrong hardware. Before purchase, compare the original hinge’s mounting arrangement, orientation, pivot area, and visible hardware details with the product information. Also inspect the surrounding door hardware, since a hinge issue can occur alongside gasket wear, loose fasteners, latch concerns, or a door that is no longer aligned correctly.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Glastender hinge provides the mechanical pivot point that allows an equipment door to move between open and closed positions. It supports the relationship between the door and its mounting surface, helping the door assembly operate in a controlled path rather than shifting excessively during use. When hinge hardware is secure and in good condition, it can help maintain consistent door positioning and make routine access easier for operators. The hinge should be considered part of the complete door assembly, along with its fasteners, latch hardware, closer components when present, and sealing components. Part 06001401 should be selected by its verified manufacturer part number and compared carefully with the original component before service.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eGlastender OEM part 06001401 provides a reliable identification point when replacing the original hinge. Ordering by the manufacturer part number helps technicians and maintenance teams distinguish this hinge from similar-looking door hardware that may have different mounting, orientation, or pivot details. Using the verified OEM number also supports more confident parts selection when the original component is available for comparison. Confirm the part number, equipment data plate, and original hinge arrangement before ordering to reduce wrong-part orders.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA hinge works by joining the door assembly to its mounting surface at a pivot point. As the door is opened or closed, the hinge guides that movement and helps keep the door in its intended position. The hinge body, pivot area, and mounting points must remain secure for the door to travel smoothly. If the hardware becomes loose, worn, bent, or damaged, the door can shift from its normal path and may not close as intended. Door alignment is also affected by the condition of the surrounding hardware. A gasket, latch, closer, or mounting fastener issue can place additional strain on the hinge or create symptoms that resemble hinge wear. During commercial equipment service, the hinge should be evaluated as part of the complete door assembly rather than as an isolated component.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the hinge, compare the removed component with Glastender part 06001401 for orientation, mounting-point arrangement, and pivot configuration. Inspect the door alignment and related hardware for wear or looseness that could affect the new hinge’s operation.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that feels loose at the pivot area may indicate worn or loose hinge hardware.\u003c\/li\u003e\n  \u003cli\u003eDoor sagging can indicate that the hinge, its fasteners, or adjacent mounting points should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that rubs against its frame during travel may indicate alignment concerns involving the hinge assembly.\u003c\/li\u003e\n  \u003cli\u003eDifficulty opening or closing the door can indicate hinge wear, binding, or damaged mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eVisible bending, cracking, corrosion, or physical damage on the hinge should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain in its normal position may indicate wear in the hinge or related door hardware.\u003c\/li\u003e\n  \u003cli\u003eUneven contact between the door and its sealing surface can indicate that door alignment should be evaluated.\u003c\/li\u003e\n  \u003cli\u003eRepeated loosening of hinge fasteners may indicate worn mounting points or a door assembly that requires inspection.\u003c\/li\u003e\n  \u003cli\u003eA latch that no longer engages consistently can indicate a door-positioning issue involving the hinge or related hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eGlastender hinge 06001401 is intended for commercial equipment service where the verified manufacturer part number matches the original door-hardware component. It is relevant to restaurant maintenance teams, foodservice equipment service providers, commercial kitchen repair operations, and facilities responsible for maintaining equipment doors and access panels. Because confirmed model fitment is not supplied here, this part should not be selected by appearance alone. Use the equipment data plate, manufacturer part number, and a direct comparison of the removed hinge to support correct ordering. Door hardware should be evaluated as a complete assembly, particularly where alignment, closing action, latching, or sealing performance has changed.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the Glastender manufacturer part number 06001401 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the required part type is a hinge.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed hinge’s overall orientation with the replacement part information.\u003c\/li\u003e\n  \u003cli\u003eCompare the mounting-point arrangement and pivot configuration before ordering.\u003c\/li\u003e\n  \u003cli\u003eReview the equipment data plate, including the model and serial number, when fitment must be confirmed.\u003c\/li\u003e\n  \u003cli\u003eInspect the original hinge for visible features that distinguish it from similar door hardware.\u003c\/li\u003e\n  \u003cli\u003eCheck whether hinge screws, pins, or mounting hardware show wear or damage and may need service.\u003c\/li\u003e\n  \u003cli\u003eInspect door alignment before ordering, since alignment concerns may involve related hardware.\u003c\/li\u003e\n  \u003cli\u003eReview the product image carefully after confirming that it represents the hinge being ordered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket for uneven compression or damage, since a misaligned door can affect how the gasket meets its sealing surface.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check these components for looseness, wear, corrosion, or damage that can affect hinge stability and door movement.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect latch engagement if the door no longer closes consistently, as door position can affect latch alignment.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer where present if the door has inconsistent closing action or places unusual force on the hinge assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Glastender part 06001401?\u003c\/h3\u003e\n\u003cp\u003eGlastender part 06001401 is a verified OEM hinge used as a mechanical door-hardware component on applicable commercial equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm that this is the correct hinge?\u003c\/h3\u003e\n\u003cp\u003eMatch Glastender manufacturer part number 06001401 to the original component or approved equipment documentation, then compare the hinge orientation, mounting arrangement, and pivot configuration.\u003c\/p\u003e\n\n\u003ch3\u003eDoes a loose door always mean the hinge has failed?\u003c\/h3\u003e\n\u003cp\u003eNot always. A loose or poorly aligned door may indicate hinge wear, but hinge fasteners, mounting points, latch hardware, a closer, and other door components should also be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the door gasket when replacing a hinge?\u003c\/h3\u003e\n\u003cp\u003eYes. Inspect the door gasket for wear or uneven compression because door alignment can affect how the gasket meets its sealing surface.\u003c\/p\u003e\n\n\u003ch3\u003eCan I order this hinge by appearance alone?\u003c\/h3\u003e\n\u003cp\u003eNo. Similar-looking hinges can differ in orientation, mounting details, and pivot configuration. Use the verified Glastender part number 06001401 and compare the removed component before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eIs confirmed equipment model fitment provided for this hinge?\u003c\/h3\u003e\n\u003cp\u003eConfirmed model fitment is not provided here. Verify the equipment model and serial number against approved documentation when fitment confirmation is required.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Glastender Wire Shelves – Gray Epoxy OEM Replacement\",\"description\":\"Glastender 06001401 OEM hinge for commercial equipment door hardware. Match the manufacturer part number and compare the removed hinge before ordering.\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Glastender\"},\"mpn\":\"06001401\",\"sku\":\"PD-758-194\"}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Glastender part 06001401?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Glastender part 06001401 is a verified OEM hinge used as a mechanical door-hardware component on applicable commercial equipment.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm that this is the correct hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match Glastender manufacturer part number 06001401 to the original component or approved equipment documentation, then compare the hinge orientation, mounting arrangement, and pivot configuration.\"}},{\"@type\":\"Question\",\"name\":\"Does a loose door always mean the hinge has failed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not always. A loose or poorly aligned door may indicate hinge wear, but hinge fasteners, mounting points, latch hardware, a closer, and other door components should also be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the door gasket when replacing a hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Inspect the door gasket for wear or uneven compression because door alignment can affect how the gasket meets its sealing surface.\"}},{\"@type\":\"Question\",\"name\":\"Can I order this hinge by appearance alone?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Similar-looking hinges can differ in orientation, mounting details, and pivot configuration. Use the verified Glastender part number 06001401 and compare the removed component before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Is confirmed equipment model fitment provided for this hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Confirmed model fitment is not provided here. Verify the equipment model and serial number against approved documentation when fitment confirmation is required.\"}}]}\u003c\/script\u003e","brand":"Glastender","offers":[{"title":"19-5\/8\" x 19-5\/8\"","offer_id":43654321635551,"sku":"PD-758-194","price":197.0,"currency_code":"USD","in_stock":true},{"title":"23-7\/8\" x 18-7\/8\"","offer_id":43654321668319,"sku":"PD-758-075","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/glastender-wire-shelves-gray-epoxy-coated-oem-replacement-fits-bb108-h-bb36-d-bb60-h-bb84-h-nd-94-9200322.jpg?v=1765852928"},{"product_id":"glastender-clear-plastic-fan-guard","title":"Glastender Clear Fan Guard – 8 Inch x 7 Inch x 1 Inch OEM Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Glastender\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e 06001383\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 06001383\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-758-076\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Glastender 06001383 hinge is a genuine OEM door-hardware component identified by Glastender manufacturer part number 06001383. A hinge supports controlled door movement while helping the door assembly maintain its intended position through repeated opening and closing. In commercial equipment service, sound door hardware matters because loose, worn, bent, or incorrectly matched hardware can affect door alignment, closure, and daily usability. This replacement hinge gives service professionals a reliable way to identify the correct Glastender component by its original manufacturer number rather than relying only on appearance. Proper door movement also helps reduce strain on related hardware, including the latch, closer, mounting fasteners, and gasket contact area. Before ordering, compare the removed component carefully with the product information, including its mounting arrangement, orientation, pivot location, and connection points. Inspecting the related door hardware at the same time can help identify conditions that may have contributed to uneven movement or poor door alignment. Use this OEM hinge when the documented Glastender parts information for the equipment calls for part number 06001383.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis Glastender hinge provides a mechanical pivot point for the associated door assembly. Its job is to support the door, allow repeatable opening and closing movement, and help keep the door positioned correctly relative to its frame and related hardware. Because hinges carry the door load and experience repeated movement, wear, looseness, damage, or incorrect mounting can affect how the door operates. Matching the genuine OEM part number helps technicians identify the intended replacement component for the documented application and reduce the risk of selecting a similar-looking hinge with a different mounting arrangement or orientation.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eGenuine OEM identification is especially useful for door hardware because small differences in hinge construction, mounting points, orientation, and door relationship can lead to an incorrect order. Glastender part number 06001383 provides a specific manufacturer reference for comparing the replacement with the original component and the applicable equipment documentation. Using the verified OEM number supports more confident ordering and helps reduce avoidable door-hardware mismatches.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eA hinge joins a movable door assembly to its fixed mounting surface and creates the pivot path used during opening and closing. When the door moves, the hinge hardware carries and guides that movement while the mounting points hold the assembly in position. Proper hinge condition and secure mounting help the door travel smoothly and return to its intended alignment. If a hinge becomes worn, bent, loose, damaged, or mismatched, the door may sit unevenly, move poorly, or place added strain on nearby hardware. The Glastender 06001383 hinge should be compared with the removed component and applicable equipment documentation before installation. Related door components, including the gasket, latch, closer, and mounting hardware, should also be inspected because their condition can influence overall door operation.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing door hardware, compare the original hinge and the replacement for orientation, mounting-hole arrangement, pivot location, and visible wear. Inspect hinge screws or pins, the door gasket, latch engagement, and door alignment so related conditions are addressed during service.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA door that sags or sits unevenly may indicate hinge wear, damage, or loose mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eDifficulty opening or closing the door can indicate a hinge or related door-hardware condition that should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that rubs against its frame may indicate misalignment associated with the hinge mounting or nearby hardware.\u003c\/li\u003e\n  \u003cli\u003eVisible play at the door pivot can indicate worn hinge components or loose fasteners.\u003c\/li\u003e\n  \u003cli\u003eA door that does not remain in its intended position may indicate a hinge, closer, or mounting issue.\u003c\/li\u003e\n  \u003cli\u003eUnusual movement, binding, or resistance during door travel may indicate hinge damage or misalignment.\u003c\/li\u003e\n  \u003cli\u003eCracked, bent, corroded, or visibly damaged hinge hardware should be inspected for replacement.\u003c\/li\u003e\n  \u003cli\u003eRepeated loosening of hinge fasteners can indicate wear at the mounting area or an alignment condition requiring attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis Glastender OEM hinge is intended for commercial equipment service where the applicable equipment documentation identifies manufacturer part number 06001383. Door hardware is commonly inspected during restaurant service, foodservice maintenance, and commercial kitchen repair when a door has become difficult to operate, appears misaligned, or shows visible hardware wear. Equipment fitment is not established by appearance alone. Confirm the equipment data plate, manufacturer documentation, original component, hinge orientation, and mounting arrangement before ordering. A correct hinge selection helps service personnel address the door assembly with the proper identified Glastender component.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch Glastender OEM part number 06001383 to applicable equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the removed hinge with the replacement product information before ordering.\u003c\/li\u003e\n  \u003cli\u003eConfirm the manufacturer name is Glastender.\u003c\/li\u003e\n  \u003cli\u003eVerify the equipment model and serial number against available manufacturer parts information.\u003c\/li\u003e\n  \u003cli\u003eCheck the hinge orientation and pivot location on the original component.\u003c\/li\u003e\n  \u003cli\u003eCompare the mounting-hole arrangement and mounting points.\u003c\/li\u003e\n  \u003cli\u003eInspect the existing hinge screws, pins, and mounting area for wear or damage.\u003c\/li\u003e\n  \u003cli\u003eCheck door alignment, latch operation, closer operation, and gasket condition for related issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor gasket: Inspect the gasket because door alignment and closure can affect how evenly it contacts the mating surface.\u003c\/li\u003e\n  \u003cli\u003eHinge screws or pins: Check fasteners and pivot hardware for looseness, wear, damage, or missing components that can affect hinge stability.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Inspect latch engagement because a misaligned door or worn hinge can affect how the latch meets its strike point.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer where present because hinge alignment and closer operation both influence door movement and closing behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is Glastender part number 06001383?\u003c\/h3\u003e\n\u003cp\u003eGlastender part number 06001383 is identified as a genuine OEM hinge.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct Glastender hinge?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number 06001383 to applicable manufacturer documentation, then compare the original hinge's orientation, mounting arrangement, and pivot location.\u003c\/p\u003e\n\n\u003ch3\u003eCan a worn hinge affect door alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Hinge wear, damage, loose mounting hardware, or an incorrect hinge arrangement may contribute to a door sitting unevenly or moving poorly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should be inspected with a replacement hinge?\u003c\/h3\u003e\n\u003cp\u003eInspect the hinge screws or pins, mounting area, door gasket, latch, closer, and overall door alignment for related wear or damage.\u003c\/p\u003e\n\n\u003ch3\u003eShould I order a hinge based only on its appearance?\u003c\/h3\u003e\n\u003cp\u003eNo. Similar-looking hinges can differ in orientation, mounting points, and pivot location. Use the verified Glastender OEM number and compare the original component before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"Glastender 06001383 Genuine OEM Hinge\",\"description\":\"Glastender 06001383 genuine OEM hinge for commercial equipment service. Compare the original component and mounting arrangement before ordering.\",\"sku\":\"PD-758-076\",\"mpn\":\"06001383\",\"image\":\"Glastender 06001383 genuine OEM hinge\",\"brand\":{\"@type\":\"Brand\",\"name\":\"Glastender\"},\"manufacturer\":{\"@type\":\"Organization\",\"name\":\"Glastender\"},\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"06001383\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Hinge\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Glastender part number 06001383?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Glastender part number 06001383 is identified as a genuine OEM hinge.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct Glastender hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number 06001383 to applicable manufacturer documentation, then compare the original hinge's orientation, mounting arrangement, and pivot location.\"}},{\"@type\":\"Question\",\"name\":\"Can a worn hinge affect door alignment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Hinge wear, damage, loose mounting hardware, or an incorrect hinge arrangement may contribute to a door sitting unevenly or moving poorly.\"}},{\"@type\":\"Question\",\"name\":\"What should be inspected with a replacement hinge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Inspect the hinge screws or pins, mounting area, door gasket, latch, closer, and overall door alignment for related wear or damage.\"}},{\"@type\":\"Question\",\"name\":\"Should I order a hinge based only on its appearance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Similar-looking hinges can differ in orientation, mounting points, and pivot location. Use the verified Glastender OEM number and compare the original component before ordering.\"}}]}\u003c\/script\u003e","brand":"Glastender","offers":[{"title":"Default Title","offer_id":43654365774047,"sku":"PD-758-076","price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/glastender-clear-fan-guard-8-x-7-x-1-oem-replacement-fits-bb-fv-kc-lp-mf-nd-pt-st-series-models-7371635.jpg?v=1765853107"},{"product_id":"glastender-electronic-temperature-controls","title":"Glastender Electronic Temperature Controls – LED Display OEM Replacement","description":"\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43654384681183,"sku":"PD-758-107","price":346.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/GLA06007476.gif?v=1664931368"},{"product_id":"beverage-air","title":"Beverage-Air Bottom Left or Top Right Hinge – OEM Cooler \u0026 Freezer Door Hinge Replacement","description":"\u003cp data-start=\"283\" data-end=\"532\"\u003eThe \u003cstrong data-start=\"287\" data-end=\"333\"\u003eBeverage-Air Bottom Left \/ Top Right Hinge\u003c\/strong\u003e is a \u003cstrong data-start=\"339\" data-end=\"371\"\u003egenuine OEM replacement part\u003c\/strong\u003e designed for a wide range of Beverage-Air coolers and freezers. Proper hinge function is critical for smooth door swing, tight sealing, and energy efficiency.\u003c\/p\u003e\u003cp data-start=\"534\" data-end=\"825\"\u003eThis hinge is compatible with both \u003cstrong data-start=\"569\" data-end=\"584\"\u003ebottom left\u003c\/strong\u003e and \u003cstrong data-start=\"589\" data-end=\"602\"\u003etop right\u003c\/strong\u003e positions, making it a versatile solution for multiple Beverage-Air refrigeration units. Replacing a worn hinge ensures proper door alignment, reduces gasket wear, and helps maintain consistent cold storage temperatures.\u003c\/p\u003e\u003cp data-start=\"827\" data-end=\"855\"\u003e✅ \u003cstrong data-start=\"829\" data-end=\"853\"\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul data-start=\"856\" data-end=\"1146\"\u003e\n\u003cli data-start=\"856\" data-end=\"894\"\u003e\u003cp data-start=\"858\" data-end=\"894\"\u003eGenuine \u003cstrong data-start=\"866\" data-end=\"892\"\u003eBeverage-Air OEM hinge\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"895\" data-end=\"947\"\u003e\u003cp data-start=\"897\" data-end=\"947\"\u003eFits \u003cstrong data-start=\"902\" data-end=\"945\"\u003ebottom left or top right door positions\u003c\/strong\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"948\" data-end=\"992\"\u003e\u003cp data-start=\"950\" data-end=\"992\"\u003eRestores smooth door swing and alignment\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"993\" data-end=\"1052\"\u003e\u003cp data-start=\"995\" data-end=\"1052\"\u003eHelps maintain tight door sealing for energy efficiency\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1053\" data-end=\"1104\"\u003e\u003cp data-start=\"1055\" data-end=\"1104\"\u003eExtends gasket and door life by reducing stress\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1105\" data-end=\"1146\"\u003e\u003cp data-start=\"1107\" data-end=\"1146\"\u003eBuilt for long-lasting commercial use\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1148\" data-end=\"1151\"\u003e\u003ch2 data-start=\"1153\" data-end=\"1175\"\u003e🔹 Specifications\u003c\/h2\u003e\u003cul data-start=\"1176\" data-end=\"1644\"\u003e\n\u003cli data-start=\"1176\" data-end=\"1203\"\u003e\u003cp data-start=\"1178\" data-end=\"1203\"\u003e\u003cstrong data-start=\"1178\" data-end=\"1188\"\u003eBrand:\u003c\/strong\u003e Beverage-Air\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1204\" data-end=\"1233\"\u003e\u003cp data-start=\"1206\" data-end=\"1233\"\u003e\u003cstrong data-start=\"1206\" data-end=\"1220\"\u003ePart Type:\u003c\/strong\u003e Door Hinge\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1234\" data-end=\"1275\"\u003e\u003cp data-start=\"1236\" data-end=\"1275\"\u003e\u003cstrong data-start=\"1236\" data-end=\"1249\"\u003ePosition:\u003c\/strong\u003e Bottom Left \/ Top Right\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1276\" data-end=\"1327\"\u003e\u003cp data-start=\"1278\" data-end=\"1327\"\u003e\u003cstrong data-start=\"1278\" data-end=\"1286\"\u003eOEM:\u003c\/strong\u003e Yes – Genuine Beverage-Air Replacement\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1328\" data-end=\"1644\"\u003e\n\u003cp data-start=\"1330\" data-end=\"1354\"\u003e\u003cstrong data-start=\"1330\" data-end=\"1352\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1357\" data-end=\"1644\"\u003e\n\u003cli data-start=\"1357\" data-end=\"1394\"\u003e\u003cp data-start=\"1359\" data-end=\"1394\"\u003eBB58G, BB68G, BB72G, BB78G, BB94G\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1397\" data-end=\"1423\"\u003e\u003cp data-start=\"1399\" data-end=\"1423\"\u003eCFG48, CFG485, CFG48Y5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1426\" data-end=\"1444\"\u003e\u003cp data-start=\"1428\" data-end=\"1444\"\u003eCRG481, CRG741\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1447\" data-end=\"1464\"\u003e\u003cp data-start=\"1449\" data-end=\"1464\"\u003eKF74, KF745AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1467\" data-end=\"1493\"\u003e\u003cp data-start=\"1469\" data-end=\"1493\"\u003eKR481AS, KR74, KR741AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1496\" data-end=\"1507\"\u003e\u003cp data-start=\"1498\" data-end=\"1507\"\u003eRR491AS\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1510\" data-end=\"1560\"\u003e\u003cp data-start=\"1512\" data-end=\"1560\"\u003eSPE3615M, SPE4812, SPE6016C, SPE6024M, SPE7230\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1563\" data-end=\"1587\"\u003e\u003cp data-start=\"1565\" data-end=\"1587\"\u003eUCF27AHC2423, UCF48A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1590\" data-end=\"1621\"\u003e\u003cp data-start=\"1592\" data-end=\"1621\"\u003eUCR48, UCR48A23, UCR48A23TG\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1624\" data-end=\"1644\"\u003e\u003cp data-start=\"1626\" data-end=\"1644\"\u003eWTF48A, WTRD60A2\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr data-start=\"1646\" data-end=\"1649\"\u003e\u003ch2 data-start=\"1651\" data-end=\"1683\"\u003e🔹 FAQ – Beverage-Air Hinge\u003c\/h2\u003e\u003cp data-start=\"1685\" data-end=\"1777\"\u003e\u003cstrong data-start=\"1685\" data-end=\"1710\"\u003eQ: Is this hinge OEM?\u003c\/strong\u003e\u003cbr data-start=\"1710\" data-end=\"1713\"\u003eA: Yes, it’s a \u003cstrong data-start=\"1728\" data-end=\"1774\"\u003egenuine OEM Beverage-Air replacement hinge\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"1779\" data-end=\"1901\"\u003e\u003cstrong data-start=\"1779\" data-end=\"1827\"\u003eQ: Which hinge positions does this part fit?\u003c\/strong\u003e\u003cbr data-start=\"1827\" data-end=\"1830\"\u003eA: It is designed for the \u003cstrong data-start=\"1856\" data-end=\"1871\"\u003ebottom left\u003c\/strong\u003e or \u003cstrong data-start=\"1875\" data-end=\"1888\"\u003etop right\u003c\/strong\u003e positions.\u003c\/p\u003e\u003cp data-start=\"1903\" data-end=\"2041\"\u003e\u003cstrong data-start=\"1903\" data-end=\"1955\"\u003eQ: What happens if I don’t replace a worn hinge?\u003c\/strong\u003e\u003cbr data-start=\"1955\" data-end=\"1958\"\u003eA: Worn hinges cause \u003cstrong data-start=\"1979\" data-end=\"2038\"\u003edoor sagging, air leaks, energy loss, and gasket damage\u003c\/strong\u003e.\u003c\/p\u003e\u003cp data-start=\"2043\" data-end=\"2164\"\u003e\u003cstrong data-start=\"2043\" data-end=\"2083\"\u003eQ: Does this hinge include hardware?\u003c\/strong\u003e\u003cbr data-start=\"2083\" data-end=\"2086\"\u003eA: Hardware may not always be included—check your unit’s parts requirements.\u003c\/p\u003e\u003cp data-start=\"2166\" data-end=\"2373\"\u003e\u003cstrong data-start=\"2166\" data-end=\"2216\"\u003eQ: Which models is this hinge compatible with?\u003c\/strong\u003e\u003cbr data-start=\"2216\" data-end=\"2219\"\u003eA: Compatible with a wide range of Beverage-Air units including \u003cstrong data-start=\"2283\" data-end=\"2348\"\u003eBB, CFG, CRG, KF, KR, RR, SPE, UCF, UCR, WTF, and WTRD models\u003c\/strong\u003e (see full list above).\u003c\/p\u003e\u003csection class=\"pd-oem-reference\"\u003e\u003ch3\u003eOEM \/ Part Number Reference\u003c\/h3\u003e\n\u003cp\u003eKnown OEM \/ part number references for this item: 401-219A-01.\u003c\/p\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-index\" aria-label=\"\"\u003e\u003ch3\u003eRelated Parts and Resources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=PartsDirect\"\u003eShop more PartsDirect parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/all\"\u003eShop all commercial equipment parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=Commercial%20Equipment%20Parts\"\u003eSearch Commercial Equipment Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=PD-754-879\"\u003eSearch OEM \/ MPN PD-754-879\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27%20879\"\u003eSearch OEM \/ MPN 27 879\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/search?q=27879\"\u003eSearch OEM \/ MPN 27879\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-cam-rise\"\u003eRelated part: Reversible Cam Lift Hinges — Chrome Finish | Universal Reach-In Cooler\/Freezer | OEM-Style Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/edgemount-hinge-heavy-duty\"\u003eRelated part: Edgemount Hinges – Reversible | Chrome Finish | Various Sizes | Spring Cartridge Sold Separately | OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/draw-slides-2\"\u003eRelated part: Stainless Steel Drawer Roller – 1-1\/16\" Diameter | Includes 1\/4 x 20 Flat Head Screw | Continental, Delfield, Beverage-Air OEM Replacement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"pdo-search-references\" aria-label=\"\"\u003e\u003ch3\u003eCommercial Parts Shipping and Fitment Support\u003c\/h3\u003e\n\u003cp\u003eShips to commercial kitchens, restaurants, delis, supermarkets, convenience stores, and repair companies across Long Island, Suffolk County, Nassau County, NYC, New York, New Jersey, Connecticut, the Tri-State area, and the U.S.\u003c\/p\u003e\n\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e\u003c\/section\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43708494414047,"sku":"401-219A-01","price":44.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/beverage-air-bottom-left-or-top-right-hinge-oem-cooler-freezer-door-hinge-replacement-7901642.jpg?v=1765852809"},{"product_id":"hobart-retainer-mounted-magnetic-gasket","title":"HOBART Retainer Mounted Magnetic Gasket – OEM Door Seal Replacement","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e PD-764-097\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PD-764-097\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-764-097\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM part number PD-764-097 identifies this retainer mounted magnetic door gasket for commercial cooking equipment. The gasket forms the seal around the door opening, helping the door close against its mating surface with consistent compression. Its magnetic sealing edge helps hold the door in the closed position while the retainer-mounted design secures the gasket in the door’s gasket channel or retainer. A worn, torn, hardened, or distorted door gasket can prevent the door from seating evenly. Even when the door appears closed, gaps around the perimeter may allow heat, moisture, grease, or surrounding air to pass through the opening. Replacing a damaged gasket can help restore a cleaner door seal and support normal door operation in busy foodservice environments. The verified OEM number is the primary identifier for this part. Door gaskets can appear similar while using different mounting styles, corner shapes, magnetic arrangements, and seal profiles. Confirming PD-764-097 and comparing the removed gasket, door edge, and retainer arrangement before ordering helps reduce the chance of receiving a gasket that does not seat correctly.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eThis door gasket creates a compressible sealing surface between the door and the equipment opening. The magnetic portion helps the gasket maintain contact as the door closes, while the retainer-mounted edge holds the gasket in its intended position around the door perimeter. Together, these features support reliable closure and help limit unwanted air movement through the door opening. The gasket is a wear-related door component. Daily opening and closing, impact damage, residue buildup, and loss of compression can affect how evenly it contacts the mating surface. A correctly identified replacement gasket helps restore the door seal without substituting an unverified profile or mounting style.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eThe verified OEM number PD-764-097 provides a dependable identification point when selecting this door gasket. Matching the OEM number to the original component helps distinguish this retainer mounted magnetic gasket from similar-looking door seals with different profiles or attachment methods. Using the correct identified part number also gives service personnel a practical reference when comparing the removed gasket, door retainer, and equipment records before installation.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eWhen the door closes, the flexible gasket compresses against the mating surface around the opening. The magnetic section helps draw the sealing edge into contact and supports a more uniform closure around the perimeter. The retainer-mounted portion anchors the gasket to the door so the sealing edge remains positioned where it is needed during normal use. For the gasket to work properly, the seal must sit evenly in the retainer and the door must close without excessive misalignment. A gasket that is twisted, pulled from its retainer, torn, flattened, or contaminated may not make consistent contact. Door condition also matters: hinge wear, latch issues, a damaged retainer, or an out-of-alignment door can prevent a sound gasket from sealing evenly. Inspecting the complete door assembly helps identify whether the gasket is the only component requiring attention.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eBefore replacing the gasket, compare the original component with the replacement by OEM number, retainer-mounted edge, corner shape, and magnetic sealing edge. Inspect the gasket retainer for bends, residue, or damage, and check that the door closes evenly before evaluating the new seal.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible tears, cuts, splits, or missing sections of the door gasket may indicate that the seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA gasket that has pulled away from the retainer or will not remain seated can indicate wear or retainer damage.\u003c\/li\u003e\n  \u003cli\u003eFlattened or hardened areas around the gasket perimeter may indicate reduced compression.\u003c\/li\u003e\n  \u003cli\u003eUneven contact between the gasket and the door mating surface can indicate a seal, hinge, latch, or alignment concern.\u003c\/li\u003e\n  \u003cli\u003eA door that requires unusual pressure to stay closed may indicate that the gasket or related door hardware should be inspected.\u003c\/li\u003e\n  \u003cli\u003eMoisture, residue, or visible gaps near the door edge may indicate an incomplete door seal.\u003c\/li\u003e\n  \u003cli\u003eA twisted gasket lip or distorted corner may indicate that the gasket is no longer following the intended door profile.\u003c\/li\u003e\n  \u003cli\u003eFrequent door adjustments may indicate that the gasket retainer, hinges, latch, and door alignment should be evaluated together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eThis retainer mounted magnetic door gasket is identified for commercial cooking equipment and is suited to foodservice maintenance and commercial kitchen repair where a door seal requires replacement by verified OEM number. It is a practical service component for restaurants, institutional kitchens, and equipment service teams responsible for maintaining door closure and sealing condition. Because equipment fitment has not been supplied, the part should be selected by OEM number PD-764-097 and direct comparison with the original gasket rather than by assumed equipment application.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the verified OEM number PD-764-097 to the original component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eConfirm that the original part is a door gasket with a retainer-mounted attachment edge.\u003c\/li\u003e\n  \u003cli\u003eCompare the magnetic sealing edge and overall gasket profile with the removed component.\u003c\/li\u003e\n  \u003cli\u003eReview the corner shape and orientation of the original gasket before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect the door retainer or gasket channel for damage, bends, residue, or loose sections.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment model and serial number from the data plate when equipment records are available.\u003c\/li\u003e\n  \u003cli\u003eCheck whether the door closes evenly and whether hinge or latch wear may be affecting gasket contact.\u003c\/li\u003e\n  \u003cli\u003eCompare all available product images with the original component before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges should be inspected because hinge wear or misalignment can keep a correctly identified gasket from contacting evenly around the door.\u003c\/li\u003e\n  \u003cli\u003eThe door latch should be inspected because weak, damaged, or poorly adjusted latching can reduce door closure pressure at the gasket.\u003c\/li\u003e\n  \u003cli\u003eA door closer should be inspected where present because incomplete or uneven closing can affect how the magnetic gasket seats.\u003c\/li\u003e\n  \u003cli\u003eThe gasket retainer or track should be inspected because bends, damage, or buildup can prevent the retainer-mounted edge from holding the gasket in position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is OEM part number PD-764-097?\u003c\/h3\u003e\n\u003cp\u003ePD-764-097 is the verified OEM number for this retainer mounted magnetic door gasket.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a retainer mounted magnetic door gasket do?\u003c\/h3\u003e\n\u003cp\u003eIt seals the perimeter between the door and its mating surface. The retainer-mounted edge holds the gasket in place, and the magnetic section helps maintain contact when the door is closed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I identify the correct door gasket before ordering?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM number PD-764-097, then compare the original gasket’s mounting edge, magnetic sealing edge, corner shape, and overall profile with the replacement.\u003c\/p\u003e\n\n\u003ch3\u003eShould door hinges and latches be checked when replacing a gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Door alignment, hinge condition, latch operation, and retainer condition can affect how evenly a gasket contacts the door opening.\u003c\/p\u003e\n\n\u003ch3\u003eWhat can indicate that a door gasket needs attention?\u003c\/h3\u003e\n\u003cp\u003eTears, flattened sealing surfaces, pulled-out sections, distorted corners, uneven door contact, or visible gaps around the perimeter may indicate that the gasket and related door components should be inspected.\u003c\/p\u003e\n\n\u003ch3\u003eIs equipment model fitment confirmed for this gasket?\u003c\/h3\u003e\n\u003cp\u003eSpecific equipment model fitment is not supplied. Use the verified OEM number PD-764-097 and compare the original component before ordering.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"PD-764-097 Retainer Mounted Magnetic Door Gasket\",\"description\":\"Retainer mounted magnetic door gasket for commercial cooking equipment. Verified OEM number PD-764-097.\",\"sku\":\"PD-764-097\",\"mpn\":\"PD-764-097\",\"category\":\"Commercial Cooking Equipment Parts\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"PD-764-097\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Door Gasket\"},{\"@type\":\"PropertyValue\",\"name\":\"Equipment Category\",\"value\":\"Commercial cooking equipment\"},{\"@type\":\"PropertyValue\",\"name\":\"Mounting Style\",\"value\":\"Retainer mounted\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is OEM part number PD-764-097?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"PD-764-097 is the verified OEM number for this retainer mounted magnetic door gasket.\"}},{\"@type\":\"Question\",\"name\":\"What does a retainer mounted magnetic door gasket do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It seals the perimeter between the door and its mating surface. The retainer-mounted edge holds the gasket in place, and the magnetic section helps maintain contact when the door is closed.\"}},{\"@type\":\"Question\",\"name\":\"How do I identify the correct door gasket before ordering?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM number PD-764-097, then compare the original gasket’s mounting edge, magnetic sealing edge, corner shape, and overall profile with the replacement.\"}},{\"@type\":\"Question\",\"name\":\"Should door hinges and latches be checked when replacing a gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Door alignment, hinge condition, latch operation, and retainer condition can affect how evenly a gasket contacts the door opening.\"}},{\"@type\":\"Question\",\"name\":\"What can indicate that a door gasket needs attention?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tears, flattened sealing surfaces, pulled-out sections, distorted corners, uneven door contact, or visible gaps around the perimeter may indicate that the gasket and related door components should be inspected.\"}},{\"@type\":\"Question\",\"name\":\"Is equipment model fitment confirmed for this gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Specific equipment model fitment is not supplied. Use the verified OEM number PD-764-097 and compare the original component before ordering.\"}}]}\u003c\/script\u003e","brand":"PartsDirect","offers":[{"title":"7-1\/2\" x 24-1\/4\"","offer_id":43732391952607,"sku":"PD-764-097","price":44.89,"currency_code":"USD","in_stock":true},{"title":"8\" x 24-3\/4\"","offer_id":43732391985375,"sku":"PD-764-284","price":44.89,"currency_code":"USD","in_stock":true},{"title":"9-1\/8\" x 24-1\/4\"","offer_id":43732392018143,"sku":"PD-764-098","price":44.89,"currency_code":"USD","in_stock":true},{"title":"10-1\/4\" x 24-1\/2\"","offer_id":43732392050911,"sku":"PD-764-236","price":44.89,"currency_code":"USD","in_stock":true},{"title":"12-3\/8\" x 24-3\/4\"","offer_id":43732392083679,"sku":"PD-764-340","price":50.69,"currency_code":"USD","in_stock":true},{"title":"13-1\/4\" x 24-1\/2\"","offer_id":43732392116447,"sku":"PD-764-096","price":48.2,"currency_code":"USD","in_stock":true},{"title":"21-3\/8\" x 61-5\/8\"","offer_id":43732392181983,"sku":"PD-764-269","price":76.89,"currency_code":"USD","in_stock":true},{"title":"21-1\/2\" x 30\"","offer_id":43732392214751,"sku":"PD-764-272","price":57.69,"currency_code":"USD","in_stock":true},{"title":"24-1\/2\" x 25-1\/2\"","offer_id":43732392247519,"sku":"PD-764-091","price":57.69,"currency_code":"USD","in_stock":true},{"title":"24-1\/2\" x 29-5\/8\"","offer_id":43732392280287,"sku":"PD-764-082","price":51.2,"currency_code":"USD","in_stock":true},{"title":"24-1\/2\" x 60-3\/4\"","offer_id":43732392313055,"sku":"PD-764-084","price":66.2,"currency_code":"USD","in_stock":true},{"title":"24-3\/4\" x 61-1\/2\"","offer_id":43732392345823,"sku":"PD-764-083","price":66.2,"currency_code":"USD","in_stock":true},{"title":"25\" x 28-1\/2\"","offer_id":43732392378591,"sku":"PD-764-341","price":57.65,"currency_code":"USD","in_stock":true},{"title":"29-1\/2\" x 68-1\/2\" (3-sided for roll-in cabinets)","offer_id":43732392411359,"sku":"PD-764-085","price":76.59,"currency_code":"USD","in_stock":true},{"title":"29-3\/4\" x 30-1\/2\"","offer_id":43732392444127,"sku":"PD-764-271","price":65.0,"currency_code":"USD","in_stock":true},{"title":"29-3\/4\" x 34-1\/2\"","offer_id":43732392476895,"sku":"PD-764-093","price":65.5,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 33-1\/2\"","offer_id":43732392509663,"sku":"PD-764-342","price":65.5,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 61\"","offer_id":43732392542431,"sku":"PD-764-0114","price":44.89,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 69-5\/8\" (3-sided for roll-in cabinets)","offer_id":43732392575199,"sku":"PD-764-239","price":79.5,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 76-1\/2\" (3-sided for roll-in cabinets)","offer_id":43732392607967,"sku":"PD-764-343","price":86.2,"currency_code":"USD","in_stock":true},{"title":"Custom Sizes Available","offer_id":43732487831775,"sku":"","price":44.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/hobart-retainer-mounted-magnetic-gasket-2142716.jpg?v=1765853167"},{"product_id":"hobart-warmer-cabinet-magnetic-gasket","title":"HOBART Warmer Cabinet Magnetic Gasket – OEM-Style Hot Holding Door Seal","description":"\u003ch2\u003eOEM Part Details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Number:\u003c\/strong\u003e PD-764-092\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM Status:\u003c\/strong\u003e VERIFIED\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e PD-764-092\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e PD-764-092\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Door Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eOEM Part Details OEM Part Number: PD-764-092 MPN: PD-764-092 SKU: PD-764-092 Part Type: Magnetic Door Gasket OEM Status: VERIFIED Product Overview The PD-764-092 magnetic door gasket is a door seal for a commercial warmer cabinet. Positioned around the door perimeter, this gasket helps the door close against the cabinet opening and maintain a consistent seal during normal operation. A dependable seal matters in hot-holding equipment because gaps around the door can allow heat to escape, place added demand on the heating system, and make it harder for the cabinet to maintain its intended holding environment. Door gaskets are wear items that can gradually lose compression, split at the corners, pull away from the mounting area, or become damaged through frequent door use. Replacing a worn gasket can help restore proper door contact and reduce heat leakage at the cabinet opening. The magnetic design helps draw the gasket toward the cabinet frame when the door is closed, while the gasket material provides the compressible barrier between the door and cabinet. Use the verified PD-764-092 part number along with a careful comparison of the removed gasket, door mounting arrangement, and equipment data plate before ordering. Because door seals can appear similar while using different profiles or mounting styles, confirming the original component is an important step in avoiding an incorrect order.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Function\u003c\/h2\u003e\n\u003cp\u003eProduct Function This magnetic door gasket creates a compressible seal between a warmer cabinet door and the cabinet frame. When the door closes, the magnetic portion helps hold the gasket against the mating surface while the gasket body fills minor gaps around the perimeter. This helps limit heat loss through the door opening and supports more consistent operation of the cabinet. The gasket also cushions door contact and helps the door close with proper perimeter contact. A torn, hardened, distorted, or poorly seated gasket can reduce sealing performance, so the condition of the seal should be considered whenever door closure or cabinet heat retention is a concern.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose a Genuine OEM Replacement?\u003c\/h2\u003e\n\u003cp\u003eWhy Choose a Genuine OEM Replacement? The verified PD-764-092 OEM part number gives commercial equipment service teams a clear identification point when replacing the door gasket. Matching the original manufacturer part number helps reduce uncertainty created by similar-looking magnetic seals, different gasket profiles, and varying door mounting arrangements. Comparing the removed component with the listed part number and product image supports a more confident order for the intended door-sealing application.\u003c\/p\u003e\n\n\n\u003ch2\u003eHow This Part Works\u003c\/h2\u003e\n\u003cp\u003eHow This Part Works A magnetic gasket works as the flexible sealing surface around a cabinet door. As the door moves into the closed position, the gasket contacts the cabinet frame and compresses to close off the space between the door and opening. Its magnetic section helps maintain contact with the mating surface, while the gasket material conforms around the perimeter to support an even seal. For the gasket to perform properly, the door must close squarely and the sealing surfaces must meet evenly. Door sag, hinge wear, latch problems, a damaged retainer area, or a twisted gasket can prevent full contact even when the gasket itself is new. The door seal should therefore be evaluated together with the door alignment and mounting condition rather than treated as an isolated component.\u003c\/p\u003e\n\n\u003ch2\u003eTechnician Service Tip\u003c\/h2\u003e\n\u003cp\u003eTechnician Service Tip Before removing the original seal, compare its corner shape, mounting edge, magnetic orientation, and overall door perimeter with the replacement listing. Inspect the door frame contact area, hinge condition, latch action, and gasket mounting channel for damage or misalignment that could affect the new gasket's seal.\u003c\/p\u003e\n\n\n\u003ch2\u003eCommon Failure Symptoms\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible tears, splits, or separated corners in the door gasket may indicate that the seal should be inspected.\u003c\/li\u003e\n  \u003cli\u003eA door that does not make even contact around the cabinet opening can indicate gasket compression loss or door alignment concerns.\u003c\/li\u003e\n  \u003cli\u003eGaps between the gasket and cabinet frame may indicate a distorted, displaced, or damaged seal.\u003c\/li\u003e\n  \u003cli\u003eHeat escaping around the closed door may indicate that the gasket, hinges, latch, or mating surface needs inspection.\u003c\/li\u003e\n  \u003cli\u003eA gasket that feels hardened, flattened, or unable to return to shape can indicate normal wear.\u003c\/li\u003e\n  \u003cli\u003eThe door opening unexpectedly easily after closure may indicate reduced magnetic contact or an uneven sealing surface.\u003c\/li\u003e\n  \u003cli\u003eA gasket that pulls away from its mounting area may indicate damage to the gasket edge or mounting channel.\u003c\/li\u003e\n  \u003cli\u003eUneven marks or compressed sections around only part of the gasket may indicate a door alignment or hinge condition that should be checked.\u003c\/li\u003e\n  \u003cli\u003eFrequent attention to door closure may indicate that the gasket and related door hardware require evaluation.\u003c\/li\u003e\n  \u003cli\u003eDamage around the door perimeter after heavy cleaning, impact, or repeated use may indicate that the seal should be compared with the original component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommercial Applications\u003c\/h2\u003e\n\u003cp\u003eCommercial Applications This door gasket is intended for a commercial warmer cabinet door-sealing application. Commercial kitchens, foodservice maintenance teams, restaurant service providers, and equipment repair technicians may encounter this type of wear component during routine door service. In a hot-holding cabinet, the door seal works with the door assembly to help limit heat loss at the cabinet opening when the door is closed. Confirm the equipment data plate, original part number, and original gasket configuration before purchase because equipment-specific fitment has not been provided.\u003c\/p\u003e\n\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the OEM part number: Confirm PD-764-092 against the removed component or approved equipment documentation.\u003c\/li\u003e\n  \u003cli\u003eCompare the original gasket: Review the gasket shape, corner construction, and magnetic sealing edge.\u003c\/li\u003e\n  \u003cli\u003eCheck the mounting style: Confirm how the original gasket attaches to the door before ordering.\u003c\/li\u003e\n  \u003cli\u003eReview the product image: Compare the pictured gasket with the original component for visual confirmation.\u003c\/li\u003e\n  \u003cli\u003eConfirm the equipment data plate: Record the equipment model and serial number for service reference.\u003c\/li\u003e\n  \u003cli\u003eInspect the door perimeter: Look for damage, distortion, or residue that could affect gasket contact.\u003c\/li\u003e\n  \u003cli\u003eCheck hinge condition: Door sag or uneven alignment can prevent a gasket from sealing evenly.\u003c\/li\u003e\n  \u003cli\u003eCheck latch and closure action: Confirm that the door closes fully against the cabinet frame.\u003c\/li\u003e\n  \u003cli\u003eInspect the gasket mounting area: A damaged channel or retainer area may affect installation and seal retention.\u003c\/li\u003e\n  \u003cli\u003eCompare the complete door arrangement: Confirm that the replacement is being ordered for the same door position and configuration as the removed gasket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated Components\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDoor hinges: Inspect hinge wear or looseness because a sagging or misaligned door can prevent even gasket contact.\u003c\/li\u003e\n  \u003cli\u003eDoor latch: Check latch engagement because incomplete closure can leave gaps around an otherwise serviceable gasket.\u003c\/li\u003e\n  \u003cli\u003eDoor closer: Evaluate the closer, where fitted, to confirm the door is being drawn fully into the closed position.\u003c\/li\u003e\n  \u003cli\u003eGasket retainer or mounting track: Inspect the gasket mounting area for damage, distortion, or debris that can prevent secure gasket placement.\u003c\/li\u003e\n  \u003cli\u003eDoor frame contact surface: Check the mating surface for damage or buildup that may interfere with an even seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is PD-764-092?\u003c\/h3\u003e\n\u003cp\u003ePD-764-092 is a verified OEM magnetic door gasket for a commercial warmer cabinet door-sealing application.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a magnetic door gasket do on a warmer cabinet?\u003c\/h3\u003e\n\u003cp\u003eA magnetic door gasket helps create a compressible seal between the closed door and cabinet frame. This helps limit heat loss around the door opening.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct door gasket?\u003c\/h3\u003e\n\u003cp\u003eMatch OEM part number PD-764-092 to the removed component or approved equipment documentation. Also compare the gasket profile, corner shape, mounting style, and door arrangement.\u003c\/p\u003e\n\n\u003ch3\u003eShould I inspect the hinges when replacing a door gasket?\u003c\/h3\u003e\n\u003cp\u003eYes. Worn or loose hinges can cause door sag and uneven gasket contact. Inspect the hinges, latch, door closer, and gasket mounting area when evaluating a door seal.\u003c\/p\u003e\n\n\u003ch3\u003eCan a damaged gasket affect warmer cabinet operation?\u003c\/h3\u003e\n\u003cp\u003eA torn, flattened, displaced, or poorly seated gasket can allow heat to escape around the door opening and may make it harder for the cabinet door to maintain an even seal.\u003c\/p\u003e\n\n\u003ch3\u003eWhy is the original gasket profile important?\u003c\/h3\u003e\n\u003cp\u003eDoor gaskets that appear similar can use different mounting edges, corner shapes, and sealing profiles. Comparing the original gasket helps reduce the chance of ordering the wrong part.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"Product\",\"name\":\"PD-764-092 Magnetic Door Gasket for Warmer Cabinet\",\"description\":\"PD-764-092 is a verified OEM magnetic door gasket for a commercial warmer cabinet door-sealing application. Compare the original gasket profile, mounting style, and door arrangement before ordering.\",\"sku\":\"PD-764-092\",\"mpn\":\"PD-764-092\",\"category\":\"Commercial Warmer Cabinet Door Gaskets\",\"additionalProperty\":[{\"@type\":\"PropertyValue\",\"name\":\"OEM Part Number\",\"value\":\"PD-764-092\"},{\"@type\":\"PropertyValue\",\"name\":\"Part Type\",\"value\":\"Magnetic Door Gasket\"},{\"@type\":\"PropertyValue\",\"name\":\"OEM Status\",\"value\":\"VERIFIED\"}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is PD-764-092?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"PD-764-092 is a verified OEM magnetic door gasket for a commercial warmer cabinet door-sealing application.\"}},{\"@type\":\"Question\",\"name\":\"What does a magnetic door gasket do on a warmer cabinet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A magnetic door gasket helps create a compressible seal between the closed door and cabinet frame. This helps limit heat loss around the door opening.\"}},{\"@type\":\"Question\",\"name\":\"How do I confirm this is the correct door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Match OEM part number PD-764-092 to the removed component or approved equipment documentation. Also compare the gasket profile, corner shape, mounting style, and door arrangement.\"}},{\"@type\":\"Question\",\"name\":\"Should I inspect the hinges when replacing a door gasket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Worn or loose hinges can cause door sag and uneven gasket contact. Inspect the hinges, latch, door closer, and gasket mounting area when evaluating a door seal.\"}},{\"@type\":\"Question\",\"name\":\"Can a damaged gasket affect warmer cabinet operation?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A torn, flattened, displaced, or poorly seated gasket can allow heat to escape around the door opening and may make it harder for the cabinet door to maintain an even seal.\"}},{\"@type\":\"Question\",\"name\":\"Why is the original gasket profile important?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Door gaskets that appear similar can use different mounting edges, corner shapes, and sealing profiles. Comparing the original gasket helps reduce the chance of ordering the wrong part.\"}}]}\u003c\/script\u003e","brand":"PartsDirect","offers":[{"title":"24-1\/8\" x 29-5\/8\"","offer_id":43732712653023,"sku":"PD-764-092","price":52.79,"currency_code":"USD","in_stock":true},{"title":"24-1\/2\" x 61\"","offer_id":43732712685791,"sku":"PD-764-203","price":129.0,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 69-1\/4\" (3-sided)","offer_id":43732712718559,"sku":"PD-764-268","price":469.3,"currency_code":"USD","in_stock":true},{"title":"30-1\/2\" x 76\" (3-sided)","offer_id":43732712751327,"sku":"PD-764-266","price":130.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/hobart-warmer-cabinet-magnetic-gasket-1830215.jpg?v=1765853046"},{"product_id":"hobart-solar-digital-thermometer","title":"HOBART Solar Digital Thermometer – -60°F to +160°F, 8' Probe, OEM Replacement","description":"\u003ch3\u003eFAQs\u003c\/h3\u003e\u003ch4\u003eIs HOBART Solar Digital Thermometer - -60°F to +160°F, 8' Probe, OEM Replacement for commercial equipment?\u003c\/h4\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirect","offers":[{"title":"Default Title","offer_id":43732768620767,"sku":"PD-764-122","price":129.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/hobart-solar-digital-thermometer-600f-to-1600f-8-probe-oem-replacement-1137578.jpg?v=1765852806"},{"product_id":"kairak-defrost-timer-115v","title":"KAIRAK Defrost Timer 115V – OEM Replacement for Multiple Models","description":"\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43781206966495,"sku":"PD-120-929","price":285.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/kairak-defrost-timer-115v-oem-replacement-for-multiple-models-2698854.jpg?v=1765853105"},{"product_id":"heated-viewport-window-14-x-24","title":"Heated Viewport 14 Inch x 24 Inch – Walk-In Cooler \u0026 Freezer Heated Window","description":"\u003ch3\u003eFAQs\u003c\/h3\u003e\u003ch4\u003eIs Heated Viewport 14\" x 24\" - Walk-In Cooler \u0026amp; Freezer Heated Window for commercial equipment?\u003c\/h4\u003e\u003cp\u003eConfirm the OEM number, MPN, SKU, equipment model, serial plate, voltage, dimensions, mounting style, gasket profile, connector, and photos before ordering. This listing is intended for commercial equipment parts only.\u003c\/p\u003e","brand":"PartsDirectonline","offers":[{"title":"Default Title","offer_id":43781231476959,"sku":"PD-798-343","price":1279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/3047\/0623\/products\/heated-viewport-14-x-24-walk-in-cooler-freezer-heated-window-1673144.jpg?v=1765852808"}],"url":"https:\/\/partsdirectonline.com\/collections\/commercial-cooking-equipment-parts.oembed?page=22","provider":"PartsDirectonline","version":"1.0","type":"link"}