Track Your Order
0
Hoshizaki Error Codes Explained (Complete Guide)
Quick Answer
Complete list of Hoshizaki error codes with explanations and troubleshooting steps for commercial ice machines.
Common Fitment Questions
What should I verify before ordering a refrigeration replacement part?
Verify the model number, serial plate, old part number, dimensions, mounting style, voltage when applicable, and photos of the installed part before ordering.
Can appearance alone confirm compatibility?
No. Commercial refrigeration parts can look similar but differ by dimensions, voltage, connector, mounting pattern, handedness, profile, or equipment application.
What related parts should I inspect during repair?
Inspect nearby wear parts such as gaskets, hinges, latches, heaters, handles, fan blades, sensors, controls, wiring, and mounting hardware depending on the repair symptom.
Hoshizaki Error Codes Explained (Complete Guide)
If your Hoshizaki ice machine displays an error code, it’s designed to alert you to a specific system fault. Understanding these codes can help you diagnose problems faster and avoid unnecessary downtime.
This guide explains the most common Hoshizaki error codes and what they mean.
Common Hoshizaki Error Codes
E01 – Water Supply Error
Indicates insufficient or interrupted water flow.
E02 – Drain Error
Drain system blocked or malfunctioning.
E03 – Freeze Cycle Error
Ice did not freeze within the required time.
E04 – Harvest Error
Ice failed to release from evaporator.
E05 – High Temperature Error
Ambient or condenser temperature too high.
E06 – Low Water Level
Water level sensor not detecting adequate supply.
E07 – Control Board Communication Error
Faulty signal between components.
E08 – Motor or Fan Error
Cooling fans not operating correctly.
What to Do When You See an Error Code
- Record the exact code
- Power cycle the machine
- Inspect water supply and filters
- Check airflow around condenser
- Contact a technician if error persists
When to Replace Parts
- Repeated water errors → replace inlet valve or sensor
- Temperature errors → inspect fans and condensers
- Communication errors → replace control board
Frequently Asked Questions
Can I reset a Hoshizaki error code?
Yes. Many codes reset after power cycling, but recurring errors indicate component failure.
Are error codes universal across models?
No. Always verify with your specific model.
Should I ignore error codes?
No. Ignoring codes can cause severe equipment damage.
Shop Hoshizaki Replacement Parts
Fix Hoshizaki error codes with OEM parts: